Many metal coordination compounds catalyze CO2electroreduction to CO, but cobalt phthalocyanine hybridized with conductive carbon such as carbon nanotubes is currently the only one that can generate methanol. The underlying structure–reactivity correlation and reaction mechanism desperately demand elucidation. Here we report the first in situ X‐ray absorption spectroscopy characterization, combined with ex situ spectroscopic and electrocatalytic measurements, to study CoPc‐catalyzed CO2reduction to methanol. Molecular dispersion of CoPc on CNT surfaces, as evidenced by the observed electronic interaction between the two, is crucial to fast electron transfer to the active sites and multi‐electron CO2reduction. CO, the key intermediate in the CO2‐to‐methanol pathway, is found to be labile on the active site, which necessitates a high local concentration in the microenvironment to compete with CO2for active sites and promote methanol production. A comparison of the electrocatalytic performance of structurally related porphyrins indicates that the bridging aza‐N atoms of the Pc macrocycle are critical components of the CoPc active site that produces methanol. In situ X‐ray absorption spectroscopy identifies the active site as Co(I) and supports an increasingly non‐centrosymmetric Co coordination environment at negative applied potential, likely due to the formation of a Co−CO adduct during the catalysis.
Determining the coordination environment and electronic structure of polymer-encapsulated cobalt phthalocyanine under electrocatalytic CO 2 reduction conditions using in situ X-Ray absorption spectroscopy
Encapsulating cobalt phthalocyanine (CoPc) within the coordinating polymer poly-4-vinylpyridine (P4VP) results in a catalyst–polymer composite (CoPc–P4VP) that selectively reduces CO 2 to CO at fast rates at low overpotential. In previous studies, we postulated that the enhanced selectively for CO over H 2 production within CoPc–P4VP compared to the parent CoPc complex is due to a combination of primary, secondary, and outer-coordination sphere effects imbued by the encapsulating polymer. In this work, we perform in situ electrochemical X-ray absorption spectroscopy measurements to study the oxidation state and coordination environment of Co as a function of applied potential for CoPc, CoPc–P4VP, and CoPc with an axially-coordinated py, CoPc(py). Using in situ X-ray absorption near edge structure (XANES) we provide experimental support for our previous hypothesis that Co changes from a 4-coordinate square-planar geometry in CoPc to a mostly 5-coordinate species in CoPc(py) and CoPc–P4VP. The coordination environment of CoPc–P4VP is potential-independent but pH-dependent, suggesting that the axial coordination of pyridyl groups in P4VP to CoPc is modulated by the protonation of the polymer. Finally, we show that at low potential the oxidation state of Co in the 4-coordinate CoPc is different from that in the 5-coordinate CoPc(py), suggesting that the primary coordination sphere modulates the site of reduction (metal-centered vs. ligand centered) under catalytically-relevant conditions.
more »
« less
- Award ID(s):
- 1751791
- NSF-PAR ID:
- 10167530
- Date Published:
- Journal Name:
- Dalton Transactions
- ISSN:
- 1477-9226
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract -
more » « less
Abstract Many metal coordination compounds catalyze CO2electroreduction to CO, but cobalt phthalocyanine hybridized with conductive carbon such as carbon nanotubes is currently the only one that can generate methanol. The underlying structure–reactivity correlation and reaction mechanism desperately demand elucidation. Here we report the first in situ X‐ray absorption spectroscopy characterization, combined with ex situ spectroscopic and electrocatalytic measurements, to study CoPc‐catalyzed CO2reduction to methanol. Molecular dispersion of CoPc on CNT surfaces, as evidenced by the observed electronic interaction between the two, is crucial to fast electron transfer to the active sites and multi‐electron CO2reduction. CO, the key intermediate in the CO2‐to‐methanol pathway, is found to be labile on the active site, which necessitates a high local concentration in the microenvironment to compete with CO2for active sites and promote methanol production. A comparison of the electrocatalytic performance of structurally related porphyrins indicates that the bridging aza‐N atoms of the Pc macrocycle are critical components of the CoPc active site that produces methanol. In situ X‐ray absorption spectroscopy identifies the active site as Co(I) and supports an increasingly non‐centrosymmetric Co coordination environment at negative applied potential, likely due to the formation of a Co−CO adduct during the catalysis.
-
This work investigates the effect of molecular flexibility on fundamental ligand substitution kinetics in a pair of manganese( i ) carbonyls supported by scaffold-based ligands. In previous work, we reported that the planar and rigid, anthracene-based scaffold with two pyridine ‘arms’ ( Anth-py 2 , 2) serves as a bidentate, cis donor set, akin to a strained bipyridine (bpy). In the present work, we have installed a more flexible and dynamic scaffold in the form of thianthrene ( Thianth-py 2 , 1), wherein the scaffold in the free ligand exhibits a ∼130° dihedral angle in the solid state. Thianth-py 2 also exhibits greater flexibility (molecular motion) in solution compared with Anth-py 2 , as evidenced by longer 1 H NMR T 1 times Thianthy-py 2 ( T 1 = 2.97 s) versus Anth-py 2 ( T 1 = 1.91 s). Despite the exchange of rigid Anth-py2 for flexible Thianth-py2 in the complexes [( Anth-py 2 )Mn(CO) 3 Br] (4) and [( Thianth-py 2 )Mn(CO) 3 Br] (3), respectively, nearly identical electronic structures and electron densities were observed at the Mn center: the IR of 3 exhibits features at 2026, 1938 and 1900 cm −1 , nearly identical to the features of the anthracene-based congener (4) at 2027, 1936 and 1888 cm −1 . Most importantly, we assessed the effect of ligand-scaffold flexibility on reactivity and measured the rates of an elementary ligand substitution reaction. For ease of IR study, the corresponding halide-abstracted, nitrile-bound (PhCN) cations [( Thianth-py 2 )Mn(CO) 3 (PhCN)](BF 4 ) (6) and [( Anth-py 2 )Mn(CO) 3 (PhCN)](BF 4 ) (8) were generated in situ , and the PhCN → Br – back-reaction was monitored. The more flexible 3 (thianth-based) exhibited ∼3–4× faster ligand substitution kinetics ( k 25 C = 22 × 10 −2 min −1 , k 0 C = 43 × 10 −3 min −1 ) than the rigid analogue 4 (anth-based: ( k 25 C = 6.0 × 10 −2 min −1 , k 0 C = 9.0 × 10 −3 min −1 ) on all counts. Constrained angle DFT calculations revealed that despite large changes in the thianthrene scaffold dihedral angle, the bond metrics of 3 about the metal center remain unchanged; i.e. the ‘flapping’ motion is strictly a second coordination sphere effect. These results suggest that the local environment of molecular flexibility plays a key role in determining reactivity at the metal center, which has essential implications for understanding the reactivity of organometallic catalysts and metalloenzyme active sites. We propose that this molecular flexibility component of reactivity can be considered a thematic ‘third coordination sphere’ that dictates metal structure and function.more » « less
-
In situ identification of surface sites in Cu–Pt bimetallic catalysts: Gas-induced metal segregationThe effect of gases on the surface composition of Cu–Pt bimetallic catalysts has been tested by in situ infrared (IR) and x-ray absorption spectroscopies. Diffusion of Pt atoms within the Cu–Pt nanoparticles was observed both in vacuum and under gaseous atmospheres. Vacuum IR spectra of CO adsorbed on CuPt x /SBA-15 catalysts (x = 0–∞) at 125 K showed no bonding on Pt regardless of Pt content, but reversible Pt segregation to the surface was seen with the high-Pt-content (x ≥ 0.2) samples upon heating to 225 K. In situ IR spectra in CO atmospheres also highlighted the reversible segregation of Pt to the surface and its diffusion back into the bulk when cycling the temperature from 295 to 495 K and back, most evidently for diluted single-atom alloy catalysts (x ≤ 0.01). Similar behavior was possibly observed under H 2 using small amounts of CO as a probe molecule. In situ x-ray absorption near-edge structure data obtained for CuPt 0.2 /SBA-15 under both CO and He pointed to the metallic nature of the Pt atoms irrespective of gas or temperature, but analysis of the extended x-ray absorption fine structure identified a change in coordination environment around the Pt atoms, from a (Pt–Cu):(Pt–Pt) coordination number ratio of ∼6:6 at or below 445 K to 8:4 at 495 K. The main conclusion is that Cu–Pt bimetallic catalysts are dynamic, with the composition of their surfaces being dependent on temperature in gaseous environments.more » « less
-
null (Ed.)The green compound poly[(tetrahydrofuran)tris[μ-η 5 :η 5 -1-(trimethylsilyl)cyclopentadienyl]caesium(I)ytterbium(II)], [CsYb(C 8 H 13 Si) 3 (C 4 H 8 O)] n or [(THF)Cs(μ-η 5 :η 5 -Cp′) 3 Yb II ] n was synthesized by reduction of a red THF solution of (C 5 H 4 SiMe 3 ) 3 Yb III with excess Cs metal and identified by X-ray diffraction. The compound crystallizes as a two-dimensional array of hexagons with alternating Cs I and Yb II ions at the vertices and cyclopentadienyl groups bridging each edge. This, based off the six-electron cyclopentadienyl rings occupying three coordination positions, gives a formally nine-coordinate tris(cyclopentadienyl) coordination environment to Yb and the Cs is ten-coordinate due to the three cyclopentadienyl rings and a coordinated molecule of THF. The complex comprises layers of Cs 3 Yb 3 hexagons with THF ligands and Me 3 Si groups in between the layers. The Yb—C metrical parameters are consistent with a 4 f 14 Yb II electron configuration.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1039/D0DT01288B
