skip to main content

Explore Research Products in the NSF-PAR

Title: Unraveling the origin of the “Turn-On” effect of Al-MIL-53-NO 2 during H 2 S detection
Nitro-functionalized metal–organic frameworks (MOFs), such as Al-MIL-53-NO 2 , have been widely used in quantitative hydrogen sulfide (H 2 S) detection based on the “turn-on” effect, where fluorescence enhancements were observed upon contact with H 2 S. This was believed to be caused by the fact that the electron-withdrawing –NO 2 groups in the initial non-luminescent MOFs were reduced to electron-donating –NH 2 groups in the sensing process. However, since most H 2 S detection is conducted in a suspension system consisting of MOFs and solvents, it is still unclear whether these –NH 2 groups are on MOFs or in the liquid. Using Al-MIL-53-NO 2 as a model MOF, this work aims to answer this question. Specifically, the supernatant and undissolved particles separated from the Al-MIL-53-NO 2 suspensions after being exposed to H 2 S were analyzed systematically. The results showed that it is the free BDC-NH 2 (2-aminobenzene-1,4-dicarboxylic acid) in the solution rather than the formation of Al-MIL-53-NH 2 that really caused the fluorescence enhancement. In particular, the formed BDC-NH 2 was reduced from the shedded BDC-NO 2 (2-nitrobenzene-1,4-dicarboxylic acid) during the decomposition of Al-MIL-53-NO 2 , which was attacked by OH − in the NaHS solution. We anticipate that this work will offer new ways of tracing fluorophores for MOF-based sensing applications in aqueous systems.  more » « less
Award ID(s):
1727553
NSF-PAR ID:
10170553
Author(s) / Creator(s):
; ;
Date Published:
Journal Name:
CrystEngComm
Volume:
22
Issue:
2
ISSN:
1466-8033
Page Range / eLocation ID:
195 to 204
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ( , Chemistry – A European Journal)
    Abstract

    Accumulation of high concentrations of Al(III) in body has a direct impact on health and therefore, the trace detection of Al(III) has been a matter for substantial concern. An anionic metal organic framework ({[Me2NH2]0.5[Co(DATRz)0.5(NH2BDC)] ⋅ xG}n;1; HDATRz=3,5‐diamino‐1,2,4‐triazole, H2NH2‐BDC=2‐amino‐1,4‐benzenedicarboxylic acid, G=guest molecule) composed of two types of secondary building units (SBU) and channels of varying sizes was synthesized by employing a rational design mixed ligand synthesis approach. Free −NH2groups on both the ligands are immobilized onto the pore surface of the MOF which acts as a superior luminescent sensor for turn‐on Al(III) detection. Furthermore, the large channels could allow the counter‐ions to pass through and get exchanged to selectively detect Al(III) in presence of other seventeen metal ions with magnificent luminescence enhancement. The observed limit of detection is as low as 17.5 ppb, which is the lowest among the MOF‐based sensors achieved so far. To make this detection approach simple, portable and economic, we demonstrate MOF filter paper test for real time naked eye observation.

     
    more » « less
  2. ; ; ; ; ; ; ; ; ; ; et al ( , Chemical Science)
    Stoichiometric reduction reactions of two metal–organic frameworks (MOFs) by the solution reagents (M = Cr, Co) are described. The two MOFs contain clusters with Ti 8 O 8 rings: Ti 8 O 8 (OH) 4 (bdc) 6 ; bdc = terephthalate (MIL-125) and Ti 8 O 8 (OH) 4 (bdc-NH 2 ) 6 ; bdc-NH 2 = 2-aminoterephthalate (NH 2 -MIL-125). The stoichiometry of the redox reactions was probed using solution NMR methods. The extent of reduction is greatly enhanced by the presence of Na + , which is incorporated into the bulk of the material. The roughly 1 : 1 stoichiometry of electrons and cations indicates that the storage of e − in the MOF is tightly coupled to a cation within the architecture, for charge balance. 
    more » « less
  3. ; ; ; ; ; ; ; ; ( , Journal of Materials Chemistry A)
    Recently, metal–organic framework (MOF)-based polymeric substrates show promising performance in many engineering and technology fields. However, a commonly known drawback of MOF/polymer composites is MOF crystal encapsulation and reduced surface area. This work reports a facile and gentle strategy to produce self-supported MOF predominant hollow fiber mats. A wide range of hollow MOFs including MIL-53(Al)–NH 2 , Al-PMOF, and ZIF-8 are successfully fabricated by our synthetic method. The synthetic strategy combines atomic layer deposition (ALD) of metal oxides onto polymer fibers and subsequent selective removal of polymer components followed by conversion of remaining hollow metal oxides into freestanding MOF predominant hollow fiber structures. The hollow MOFs show boosted surface area, superb porosity, and excellent pore accessibility, and exhibit a significantly improved performance in CO 2 adsorption (3.30 mmol g −1 ), CO 2 /N 2 separation selectivity (24.9 and 21.2 for 15/85 and 50/50 CO 2 /N 2 mixtures), and catalytic removal of HCHO (complete oxidation of 150 ppm within 60 min). 
    more » « less
  4. ; ; ; ; ; ; ; ; ( , ChemCatChem)
    Abstract

    Lactic acid is a renewable and versatile chemical for food, pharmaceuticals, cosmetics, and other chemicals. Lactic acid can be produced from biomass‐derived dihydroxyacetone. However, selective and recyclable water‐tolerant acid catalysts need to be developed for the specific production of lactic acid. Here we show that the MIL‐101(Al)−NH2metal‐organic framework (MOF) is a water‐tolerant and selective solid Lewis acid catalyst for dihydroxyacetone isomerization to lactic acid. The Lewis acidic MIL‐101(Al)−NH2catalyst promoted a high lactic acid selectivity of 91 % at 96 % dihydroxyacetone conversion at 120 °C in water. The reaction proceeded by temperature and/or MIL‐101(Al)−NH2MOFs mediated dihydroxyacetone dehydration to pyruvaldehyde. Subsequently, the MIL‐101(Al)−NH2facilitated rehydration of the pyruvaldehyde to lactic acid. The Lewis acidic MIL‐101(Al)−NH2catalyst was stable and reusable four times without any decrease in catalytic performance.

     
    more » « less
  5. ; ; ; ; ; ( , Chemistry – A European Journal)
    Abstract

    It has been rarely reported the morphological control of derivatives of metal‐organic frameworks (MOFs) in hydrothermal conditions for photocatalytic applications. We report here a family of highly efficient composite photocatalysts composed of terephthalic acid/terephthalate (TPA) ligand and TiO2with various morphologies (e. g., nanoparticles, nanosheets, and nanorods). The composites are synthesized by a simple one‐step hydrothermal method in various solvents (i. e., H2O, HF, H2SO4, HCl, and HNO3) using Ti‐based MOF (MIL‐125(Ti)) as precursor. The formation mechanism of composite materials with different morphological features is discussed. Impressively, the composite of TiO2nanoparticles/TPA synthesized using H2O as solvent under hydrothermal condition exhibits the highest photocatalytic H2activity among the studied materials, with a photocatalytic H2production rate of 6.38 mmol g−1 h−1, which is approximately 7.5‐fold higher than pure TiO2(Degussa, P25) and prominent apparent quantum efficiency (AQE) of 65 % at 365 nm. Furthermore, the mechanism of boosted photocatalytic H2production is discussed.

     
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email