skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Unraveling the origin of the “Turn-On” effect of Al-MIL-53-NO 2 during H 2 S detection
Nitro-functionalized metal–organic frameworks (MOFs), such as Al-MIL-53-NO 2 , have been widely used in quantitative hydrogen sulfide (H 2 S) detection based on the “turn-on” effect, where fluorescence enhancements were observed upon contact with H 2 S. This was believed to be caused by the fact that the electron-withdrawing –NO 2 groups in the initial non-luminescent MOFs were reduced to electron-donating –NH 2 groups in the sensing process. However, since most H 2 S detection is conducted in a suspension system consisting of MOFs and solvents, it is still unclear whether these –NH 2 groups are on MOFs or in the liquid. Using Al-MIL-53-NO 2 as a model MOF, this work aims to answer this question. Specifically, the supernatant and undissolved particles separated from the Al-MIL-53-NO 2 suspensions after being exposed to H 2 S were analyzed systematically. The results showed that it is the free BDC-NH 2 (2-aminobenzene-1,4-dicarboxylic acid) in the solution rather than the formation of Al-MIL-53-NH 2 that really caused the fluorescence enhancement. In particular, the formed BDC-NH 2 was reduced from the shedded BDC-NO 2 (2-nitrobenzene-1,4-dicarboxylic acid) during the decomposition of Al-MIL-53-NO 2 , which was attacked by OH − in the NaHS solution. We anticipate that this work will offer new ways of tracing fluorophores for MOF-based sensing applications in aqueous systems.  more » « less
Award ID(s):
1727553
PAR ID:
10170553
Author(s) / Creator(s):
; ;
Date Published:
Journal Name:
CrystEngComm
Volume:
22
Issue:
2
ISSN:
1466-8033
Page Range / eLocation ID:
195 to 204
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; ; ; ; ; et al (, Chemical Science)
    Stoichiometric reduction reactions of two metal–organic frameworks (MOFs) by the solution reagents (M = Cr, Co) are described. The two MOFs contain clusters with Ti 8 O 8 rings: Ti 8 O 8 (OH) 4 (bdc) 6 ; bdc = terephthalate (MIL-125) and Ti 8 O 8 (OH) 4 (bdc-NH 2 ) 6 ; bdc-NH 2 = 2-aminoterephthalate (NH 2 -MIL-125). The stoichiometry of the redox reactions was probed using solution NMR methods. The extent of reduction is greatly enhanced by the presence of Na + , which is incorporated into the bulk of the material. The roughly 1 : 1 stoichiometry of electrons and cations indicates that the storage of e − in the MOF is tightly coupled to a cation within the architecture, for charge balance. 
    more » « less
  2. ; ; ; ; ; ; ; ; (, Journal of Materials Chemistry A)
    Recently, metal–organic framework (MOF)-based polymeric substrates show promising performance in many engineering and technology fields. However, a commonly known drawback of MOF/polymer composites is MOF crystal encapsulation and reduced surface area. This work reports a facile and gentle strategy to produce self-supported MOF predominant hollow fiber mats. A wide range of hollow MOFs including MIL-53(Al)–NH 2 , Al-PMOF, and ZIF-8 are successfully fabricated by our synthetic method. The synthetic strategy combines atomic layer deposition (ALD) of metal oxides onto polymer fibers and subsequent selective removal of polymer components followed by conversion of remaining hollow metal oxides into freestanding MOF predominant hollow fiber structures. The hollow MOFs show boosted surface area, superb porosity, and excellent pore accessibility, and exhibit a significantly improved performance in CO 2 adsorption (3.30 mmol g −1 ), CO 2 /N 2 separation selectivity (24.9 and 21.2 for 15/85 and 50/50 CO 2 /N 2 mixtures), and catalytic removal of HCHO (complete oxidation of 150 ppm within 60 min). 
    more » « less
  3. ; ; ; ; ; ; ; ; (, Chemical Science)
    Hydrogen sulfide (H 2 S) is an endogenous gasotransmitter with potential therapeutic value for treating a range of disorders, such as ischemia-reperfusion injury resulting from a myocardial infarction or stroke. However, the medicinal delivery of H 2 S is hindered by its corrosive and toxic nature. In addition, small molecule H 2 S donors often generate other reactive and sulfur-containing species upon H 2 S release, leading to unwanted side effects. Here, we demonstrate that H 2 S release from biocompatible porous solids, namely metal–organic frameworks (MOFs), is a promising alternative strategy for H 2 S delivery under physiologically relevant conditions. In particular, through gas adsorption measurements and density functional theory calculations we establish that H 2 S binds strongly and reversibly within the tetrahedral pockets of the fumaric acid-derived framework MOF-801 and the mesaconic acid-derived framework Zr-mes, as well as the new itaconic acid-derived framework CORN-MOF-2. These features make all three frameworks among the best materials identified to date for the capture, storage, and delivery of H 2 S. In addition, these frameworks are non-toxic to HeLa cells and capable of releasing H 2 S under aqueous conditions, as confirmed by fluorescence assays. Last, a cellular ischemia-reperfusion injury model using H9c2 rat cardiomyoblast cells corroborates that H 2 S-loaded MOF-801 is capable of mitigating hypoxia-reoxygenation injury, likely due to the release of H 2 S. Overall, our findings suggest that H 2 S-loaded MOFs represent a new family of easily-handled solid sources of H 2 S that merit further investigation as therapeutic agents. In addition, our findings add Zr-mes and CORN-MOF-2 to the growing lexicon of biocompatible MOFs suitable for drug delivery. 
    more » « less
  4. ; ; ; ; ; ; ; ; ; ; et al (, Journal of Materials Chemistry A)
    The sorption properties of [Zr 6 O 4 (OH) 4 (NH 3 + -BDC) 6 ]Cl 6 · x H 2 O ( MOR-1 ) and H 16 [Zr 6 O 16 (H 2 PATP) 4 ]Cl 8 · x H 2 O ( MOR-2 ) towards ReO 4 − and TcO 4 − were studied in detail. Both MOR-1 and MOR-2 are very effective sorbents for ReO 4 − and TcO 4 − anions, with MOR-2 showing the highest sorption capacity (up to 4.1 ± 0.4 mmol g −1 ) among the known metal organic materials. Importantly, the exceptional sorption capacity of MOR-2 is retained even under conditions simulating acidic nuclear waste. In addition, MOR-1 and MOR-2 exhibit selective luminescence ReO 4 − sensing properties, demonstrated for the first time for MOF materials. 
    more » « less
  5. ; ; ; ; ; ; ; (, Angewandte Chemie International Edition)
    Abstract This paper describes the use of a highly crystalline conductive 2D copper3(hexaiminobenzene)2(Cu3(HIB)2) as an ultrasensitive (limit of detection of 1.8 part‐per‐billion), highly selective, reversible, and low power chemiresistive sensor for nitric oxide (NO) at room temperature. The Cu3(HIB)2‐based sensors retain their sensing performance in the presence of humidity, and exhibit strong signal enhancement towards NO over other highly toxic reactive gases, such as NO2, H2S, SO2, NH3, CO, as well as CO2. Mechanistic investigations of the Cu3(HIB)2‐NO interaction through spectroscopic analyses and density functional theory revealed that the Cu‐bis(iminobenzosemiquinoid) moieties serve as the binding sites for NO sensing, while the Ni‐bis(iminobenzosemiquinoid) MOF analog shows no noticeable response to NO. Overall, these findings provide a significant advance in the development of crystalline metal‐bis(iminobenzosemiquinoid)‐based conductive 2D MOFs as highly sensitive, selective, and reversible sensing materials for the low‐power detection of toxic gases. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email