More Like this

1. Interplay of Isomorphs and Polymorphs of Amidino-Copper(II) Complexes with Different Halides

   https://doi.org/10.3390/cryst14040319  

   Yamba, Zaina; Peoble, Anna; Novikov, Egor; Castañeda, Raúl; Timofeeva, Tatiana (April 2024, Crystals)

   To increase the number of potential materials for application as MRI contrast agents, several Cu(II) complexes were synthesized. Cu(II) complexes were chosen because they are less expensive in comparison with the presently used Gd(III), Mn(II) and other agents. Pyridine-2-carboximidamide (1), pyrimidine-2-carboximidamide (2) and pyrazole-2-carboximidamide (3) in the form of different salts along with CuCl2 and NaCl or CuBr2 and NaBr were used to obtain four Cu(II) complexes: dichloro-pyrimidine-2-carboximidamide copper(II) (4), dibromo-pyrimidine-2-carboximidamide copper(II) (5), dichloro-pirazole-2-carboximidamide copper(II) (6), and dibromo-pirazole-2-carboximidamide copper(II) (7). X-ray diffraction analysis revealed that molecular complexes 4–7 contain square planar coordinated Cu(II) atoms and their structures are very similar, as well as their packing in crystals, which allows us to consider them isomorphs. The same synthetic approach to complex preparation where NaCl or NaBr was not used brought us to the formation of dimeric complexes μ-chloro{chloro(pyridine-2-carboximidamide)copper(II)} (8) and μ-chloro{chloro(pyrimidine-2-carboximidamide)copper(II)} (9). In the dimeric complexes, two fragments which were the same as in monomeric complexes 4–7 are held together by bridging Cu-Cl bonds making the coordination of Cu equal to 5 (square pyramid). In dimeric complexes, axial Cu-Cl bonds are 2.7360 and 2.854 Å. These values are Cu-Cl bonds on the edge of existence according to statistical data from CSD. Synthesized complexes were characterized by IR spectroscopy, TGA, PXRD, EPR, and quantum chemical calculations. The higher thermal stability of monomer pyrimidine-based complexes with Cl and Br substituents makes them more prospective for further studies. 

   more » « less
2. Periodic trends in the hydration energies and critical sizes of alkaline earth and transition metal dication water complexes

   https://doi.org/10.1002/mas.21830  

   Yang, Fan; Armentrout, P. B. (January 2023, Mass Spectrometry Reviews)

   Abstract This review encompasses guided ion beam tandem mass spectrometry studies of hydrated metal dication complexes. Metals include the Group 2 alkaline earths (Mg, Ca, Sr, and Ba), late first‐row transition metals (Mn, Fe, Co, Ni, Cu, and Zn), along with Cd. In all cases, threshold collision‐induced dissociation experiments are used to quantitatively determine the sequential hydration energies for M 2+ (H 2 O) x complexes ranging in size from one to 11 water molecules. Periodic trends in these bond dissociation energies are examined and discussed. Values are compared to other experimental results when available. In addition to dissociation by simple water ligand loss, complexes at a select size (which differs from metal to metal) are also observed to undergo charge separation to yield a hydrated metal hydroxide cation and a hydrated proton. This leads to the concept of a critical size, x crit , and the periodic trends in this value are also discussed. 

   more » « less
3. Cyclopentadienone Iridium Bipyridyl Complexes: Acid-Stable Transfer Hydrogenation Catalysts

   https://doi.org/10.1021/acs.organomet.3c00266  

   Marron, Daniel P.; Galvin, Conor M.; Waymouth, Robert M. (August 2023, Organometallics)

   The synthesis, structure, and reactivity of a series of cyclopentadienone and hydroxycyclopentadienyl 4,4’-dimethylbipyridine (dmbpy) iridium complexes (C5Tol2Ph2O)(dmbpy)IrCl 1, [(C5Tol2Ph2OH)(dmbpy)IrCl][OTf] 2 (C5Tol2Ph2O)(dmbpy)IrH 3, and [(C5Tol2Ph2OH)(dmbpy)IrH][OTf] 4 are described. The Ir(I) complexes 1 and 3 are active catalyst precursors for transfer hydrogenation of aldehydes, ketones, and N-heterocycles with HCO2H/Et3N under mild conditions. Model studies implicate the cationic iridium hydride, [(C5Tol2Ph2OH)(dmbpy)IrH][OTf] 4 as a key intermediate, as 4 reacts readily with acetone to generate isopropanol. Selectivity over hydrogenation of alkenes is enhanced compared to other Shvo-type catalysts, and only modest C=C hydrogenation observed when adjacent to polarizing functional groups. Catalytic hydrogenation likely proceeds by a metal-ligand bifunctional mechanism similar to related cyclopentadienone complexes 

   more » « less
4. Synthesis, reactivity, structures, and dynamic properties of gyroscope like iron complexes with dibridgehead diphosphine cages: pre- vs. post-metathesis substitutions as routes to adducts with neutral dipolar Fe(CO)(NO)(X) rotors

   https://doi.org/10.1039/c6dt03258c  

   Lang, Georgette M.; Skaper, Dirk; Hampel, Frank; Gladysz, John A. (January 2016, Dalton Transactions)

   Three routes are explored to the title halide/cyanide complexes trans -Fe(CO)(NO)(X)(P((CH 2 ) 14 ) 3 P) ( 9c-X ; X = Cl/Br/I/CN), the Fe(CO)(NO)(X) moieties of which can rotate within the diphosphine cages (Δ H ‡ /Δ S ‡ (kcal mol −1 /eu −1 ) 5.9/−20.4 and 7.4/−23.9 for 9c-Cl and 9c-I from variable temperature 13 C NMR spectra). First, reactions of the known cationic complex trans -[Fe(CO) 2 (NO)(P((CH 2 ) 14 ) 3 P)] + BF 4 − and Bu 4 N + X − give 9c-Cl /- Br /- I /- CN (75–83%). Second, reactions of the acyclic complexes trans -Fe(CO)(NO)(X)(P((CH 2 ) m CHCH 2 ) 3 ) 2 and Grubbs’ catalyst afford the tris(cycloalkenes) trans -Fe(CO)(NO)(X)(P((CH 2 ) m CHCH(CH 2 ) m ) 3 P) ( m /X = 6/Cl,Br,I,CN, 7/Cl,Br, 8/Cl,Br) as mixtures of Z / E isomers (24–41%). Third, similar reactions of trans -[Fe(CO) 2 (NO)(P((CH 2 ) m CHCH 2 ) 3 ) 2 ] + BF 4 − and Grubbs’ catalyst afford crude trans -[Fe(CO) 2 (NO)P((CH 2 ) m CHCH(CH 2 ) m ) 3 P)] + BF 4 − ( m = 6, 8). However, the CC hydrogenations required to consummate routes 2 and 3 are problematic. Crystal structures of 9c-Cl /- Br /- CN are determined. Although the CO/NO/X ligands are disordered, the void space within the diphosphine cages is analyzed in terms of horizontal and vertical constraints upon Fe(CO)(NO)(X) rotation and the NMR data. The molecules pack in identical motifs with parallel P–Fe–P axes, and without intermolecular impediments to rotation in the solid state. 

   more » « less
5. Preserving the shape of silver nanocubes under corrosive environment by covering their edges and corners with iridium

   https://doi.org/10.1039/d0nr05969b  

   Wang, Peng; Ahn, Jaewan; Gao, Ruoqi; Qin, Dong (October 2020, Nanoscale)

   null (Ed.)

   Silver nanocubes have found use in an array of applications but their performance has been plagued by the shape instability arising from the oxidation and dissolution of Ag atoms from the edges and corners. Here we demonstrate that the shape of Ag nanocubes can be well preserved by covering their edges and corners with a corrosion-resistant metal such as Ir. In a typical process, we titrate a Na 3 IrCl 6 solution in ethylene glycol (EG) into a suspension of Ag nanocubes in an EG solution in the presence of poly(vinylpyrrolidone) (PVP) held at 110 °C. The Ir atoms derived from the reduction of Na 3 IrCl 6 by EG and Ag are deposited onto the edges and then corners for the generation of Ag–Ir core-frame nanocubes. Remarkably, our results indicate that a small amount of Ir atoms on the edges and corners is adequate to prevent the Ag nanocubes from transforming into nanospheres when heated in a PVP/EG solution up to 110 °C. We further demonstrate that these Ag–Ir nanocubes embrace plasmonic properties comparable to those of the original Ag nanocubes, making them immediately useful in a variety of applications. This strategy for stabilizing the shape of Ag nanocubes should be extendible to Ag nanocrystals with other shapes or nanocrystals comprised of other metals. 

   more » « less