An official website of the United States government
Abstract A 15-yr duration record of mooring observations from the eastern (>70°E) Eurasian Basin (EB) of the Arctic Ocean is used to show and quantify the recently increased oceanic heat flux from intermediate-depth (~150–900 m) warm Atlantic Water (AW) to the surface mixed layer and sea ice. The upward release of AW heat is regulated by the stability of the overlying halocline, which we show has weakened substantially in recent years. Shoaling of the AW has also contributed, with observations in winter 2017–18 showing AW at only 80 m depth, just below the wintertime surface mixed layer, the shallowest in our mooring records. The weakening of the halocline for several months at this time implies that AW heat was linked to winter convection associated with brine rejection during sea ice formation. This resulted in a substantial increase of upward oceanic heat flux during the winter season, from an average of 3–4 W m −2 in 2007–08 to >10 W m −2 in 2016–18. This seasonal AW heat loss in the eastern EB is equivalent to a more than a twofold reduction of winter ice growth. These changes imply a positive feedback as reduced sea ice cover permits increased mixing, augmenting the summer-dominated ice-albedo feedback.
more »
« less
Structure and dynamics of mesoscale eddies over the Laptev Sea continental slope in the Arctic Ocean
Abstract. Heat fluxes steered by mesoscale eddies may be a significant, but still notquantified, source of heat to the surface mixed layer and sea ice cover inthe Arctic Ocean, as well as a source of nutrients for enhancing seasonalproductivity in the near-surface layers. Here we use 4 years (2007–2011)of velocity and hydrography records from a moored profiler over the LaptevSea slope and 15 months (2008–2009) of acoustic Doppler current profilerdata from a nearby mooring to investigate the structure and dynamics ofeddies at the continental margin of the eastern Eurasian Basin. Typical eddyscales are radii of the order of 10 km, heights of 600 m, andmaximum velocities of ∼0.1 m s−1. Eddies areapproximately equally divided between cyclonic and anticyclonicpolarizations, contrary to prior observations from the deep basins and alongthe Lomonosov Ridge. Eddies are present in the mooring records about 20 %–25 % of the time,taking about 1 week to pass through the mooring at anaverage frequency of about one eddy per month. We found that the eddies observed are formed in two distinct regions – near FramStrait, where the western branch of Atlantic Water (AW) enters the ArcticOcean, and near Severnaya Zemlya, where the Fram Strait and Barents Seabranches of the AW inflow merge. These eddies, embedded in the ArcticCircumpolar Boundary Current, carry anomalous water properties along theeastern Arctic continental slope. The enhanced diapycnal mixing that wefound within EB eddies suggests a potentially important role for eddies inthe vertical redistribution of heat in the Arctic Ocean interior.
more »
« less
- Award ID(s):
- 1708424
- PAR ID:
- 10182006
- Date Published:
- Journal Name:
- Ocean Science
- Volume:
- 14
- Issue:
- 5
- ISSN:
- 1812-0792
- Page Range / eLocation ID:
- 1329 to 1347
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Time Dependent Flow of Atlantic Water on the Continental Slope of the Beaufort Sea Based on MooringsAbstract The flow and transformation of warm, salty Atlantic‐origin water (AW) in the Arctic Ocean plays an important role in the global overturning circulation that helps regulate Earth's climate. The heat that it transports also impacts ice melt in different parts of the Arctic. This study uses data from a mooring array deployed across the shelf/slope of the Alaskan Beaufort Sea from 2002–2004 to investigate the flow of AW. A short‐lived “rebound jet” of AW on the upper continental slope regularly follows wind‐driven upwelling events. A total of 57 such events, lasting on average 3 days each, occurred over the 2 year period. As the easterly wind subsides, the rebound jet quickly spins up while the isopycnals continue to slump from their upwelled state. The strength of the jet is related to the cross‐slope isopycnal displacement, which in turn is dependent on the magnitude of the wind, in line with previous modeling. Seaward of the rebound jet, the offshore‐most mooring of the array measured the onshore branch of the AW boundary flowing eastward in the Canada Basin. However, the signature of the boundary current was only evident in the second year of the mooring timeseries. We suspect that this is due to the varying influence of the Beaufort Gyre in the two years, associated with a change in pattern of the wind stress curl that helps drive the gyre.more » « less
-
The Pioneer Central Surface Piercing Profiler Mooring is located on the Continental Shelf, approximately 130 meters deep. The Continental Shelf-Slope area off the New England coast is a highly productive area and one that is located at a dynamic intersection where ocean currents meet in weather-like “fronts,” and where nutrients, pollutants, and other properties are exchanged between the coast and the deep ocean. Data from the shelf area help to examine exchanges between the shelf and slope and the shelf ecosystem, as well as provide broader insight into the issues of air-sea gas exchange, including Carbon Dioxide.\nLike other Surface Piercing Profiler Moorings, this mooring contains a Surface Piercing Profiler that allows for the sampling of near surface phenomena as the Profiler travels through the water then breaches the surface. Fine resolution sampling of the water column, particularly at the very surface of the water, provides key insights into the exchange of gases, heat, etc. between the atmosphere and the ocean. While on the surface, the profiler transmits data to shore.more » « less
-
The Pioneer Inshore Surface Piercing Profiler Mooring is located on the inner Continental Shelf, approximately 90 meters deep. The Continental Shelf-Slope area off the New England coast is a highly productive area and one that is located at a dynamic intersection where ocean currents meet in weather-like “fronts,” and where nutrients, pollutants, and other properties are exchanged between the coast and the deep ocean. Data from the inshore, shelf area help to examine exchanges between the shelf and slope and the shelf ecosystem, as well as provide broader insight into the issues of air-sea gas exchange, including Carbon Dioxide.\nLike other Surface Piercing Profiler Moorings, this mooring contains a Surface Piercing Profiler that allows for the sampling of near surface phenomena as the Profiler travels through the water then breaches the surface. Fine resolution sampling of the water column, particularly at the very surface of the water, provide key insights into the exchange of gases, heat, etc between the atmosphere and the ocean. While on the surface, the profiler transmits data to shore.more » « less
-
The Oregon Slope Base Shallow Profiler Mooring is situated adjacent to the continental slope off the coast of Oregon at ~2,900 meters water depth. Here, ocean water properties are profoundly impacted by the California Current and internal waves. The coastal region of the Pacific Northwest is a classic wind-driven upwelling system where nutrient-rich deep waters rise to replace warmer surface waters, resulting in high marine productivity that attracts zooplankton, fish, and marine mammals. Near-bottom fauna are periodically negatively impacted by the flow of deep waters with very low oxygen concentrations (hypoxic events), and upwelling of corrosive, acidified waters onto the continental shelf. This two-legged mooring is attached to an electro-optical cable that supplies power and bandwidth and hosts a Shallow Profiler (SF01B), a 200m Platform (PC01B), and a Winch Controller (SC01B). The 200 m platform and Shallow Profiler both house scientific instrumentation, and the profiler is tethered to a mooring-mounted winch that allows it to travel across a fixed depth in the water column (20 m to 200 m below sea surface), determined by currents and wave conditions at the surface. The mooring is co-located with a Low-Power junction box that collects complementary data near the seafloor. When coupled with other Cabled Array and Endurance Array installations off the central Oregon coast, the Slope Base Shallow Profiler Mooring allows for measurements of a variety of coastal phenomena, including cross-shelf and along-shelf variability.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.5194/os-14-1329-2018
