More Like this

1. Upper-plate structure in Ecuador coincident with the subduction of the Carnegie Ridge and the southern extent of large mega-thrust earthquakes

   https://doi.org/10.1093/gji/ggz558  

   Lynner, Colton ; Koch, Clinton ; Beck, Susan L ; Meltzer, Anne ; Soto-Cordero, Lillian ; Hoskins, Mariah C ; Stachnik, Josh C ; Ruiz, Mario ; Alvarado, Alexandra ; Charvis, Philippe ; et al ( March 2020 , Geophysical Journal International)

   SUMMARY The Ecuadorian convergent margin has experienced many large mega-thrust earthquakes in the past century, beginning with a 1906 event that propagated along as much as 500 km of the plate interface. Many subsections of the 1906 rupture area have subsequently produced Mw ≥ 7.7 events, culminating in the 16 April 2016, Mw 7.8 Pedernales earthquake. Interestingly, no large historic events Mw ≥ 7.7 appear to have propagated southward of ∼1°S, which coincides with the subduction of the Carnegie Ridge. We combine data from temporary seismic stations deployed following the Pedernales earthquake with data recorded by the permanent stations of the Ecuadorian national seismic network to discern the velocity structure of the Ecuadorian forearc and Cordillera using ambient noise tomography. Ambient noise tomography extracts Vsv information from the ambient noise wavefield and provides detailed constraints on velocity structures in the crust and upper mantle. In the upper 10 km of the Ecuadorian forearc, we see evidence of the deepest portions of the sedimentary basins in the region, the Progreso and Manabí basins. At depths below 30 km, we observe a sharp delineation between accreted fast forearc terranes and the thick crust of the Ecuadorian Andes. At depths ∼20 km, we see a strong fast velocity anomaly that coincidesmore »with the subducting Carnegie Ridge as well as the southern boundary of large mega-thrust earthquakes. Our observations raise the possibility that upper-plate structure, in addition to the subducting Carnegie Ridge, plays a role in the large event segmentation seen along the Ecuadorian margin.« less
2. Teleseismic Converted Waves Image of the Indo-Burma Subduction System Across the Bangladesh-India-Myanmar (BIMA) Array

   Ajala, R. ; Persaud, P. ; Steckler, M. ; Sandvol, E. ; Islam, M. ; Gaherty, J. ; Than, O. ; Oo, K. ; Akhter, S. ; Ni, J. ( January 2020 , American Geophysical Union, Fall Meeting 2020)

   Recent GPS studies show that the Indo-Burma subduction system is locked with the implication of a potential large-magnitude earthquake. To inform better seismic hazard models in the region, we need an improved understanding of the crustal structure and the dynamics of the Indo-Burma subduction system. The Bangladesh-India-Myanmar (BIMA) tripartite project deployed 60 broadband seismometers across the subduction system and have been continuously recording data for ~2 years. In this study, we computed receiver functions from 30 high-quality earthquakes (M≥5.9) with epicentral distances between 30º and 90º recorded by the array. The algorithm utilized ensures the uniqueness of the seismic model and provides an uncertainty estimate of every converted wave amplitude. We stacked all the receiver functions produced at each station along the entire transect to generate a cross-sectional model of the average crustal structure. The level of detail in the image is improved by computing higher frequency receiver functions up to 4 Hz. The results represent some of the strongest constraints on crustal structure across the subduction system. Beneath the Neogene accretionary prism's outer belt, we observe a primary conversion associated with the Ganges Brahmaputra Delta that ranges in depth from ~10 km near the deformation front up to ~12more »km at the eastern boundary. From the eastern end of the Neogene accretionary prism to the Sagaing Fault, we image the Indian subducting slab and the Central Myanmar basin. The depth-extent of seismicity associated with the Wadati-Benioff zone is consistent with the locations of primary conversions from the subducting plate. We further verify the converted phases of the slab by analyzing azimuthal moveout variations. The Central Myanmar basin is roughly bowl-shaped in cross-section with a maximum thickness of ~15 km about halfway between the Kabaw and Sagaing faults. The average crustal thickness beneath the Ganges-Brahmaputra delta is ~20 km, most likely representing a transitional crust formed from thinning of the continental crust intruded and underplated by igneous rocks. In contrast, the average thickness of the continental crust beneath the Central Myanmar basin is ~40 km. Our results provide a baseline model for future geophysical investigations of the Indo-Burma subduction zone.« less
3. Anisotropy-revealed change in hydration along the Alaska subduction zone

   https://doi.org/10.1130/G48860.1  

   Lynner, Colton ( June 2021 , Geology)

   Abstract Megathrust earthquake behavior in subduction zones is controlled by a variety of factors including the hydration state of the subducting slab. Increased hydration reduces the occur-rence of great, damaging earthquakes by diminishing the strength of the material along the interface between tectonic plates. Understanding variations in hydration in subductions zones is necessary for properly assessing the overall hazard posed by each region. Fortunately, seismic anisotropy is strongly dependent upon hydration of the subducting crust and litho-sphere. I present shear-wave splitting measurements that illuminate changes in anisotropy, and therefore hydration, of the subducting Pacific plate beneath the Alaska subduction zone (northern Pacific Ocean). Variations in shear-wave splitting directly correlate to changes in the behavior of great, megathrust earthquakes. My measurements show that the Shumagin seismic gap is characterized by a hydrated subducting slab, explaining the long-term lack of great earthquakes. Observations in the immediately adjacent Semidi segment, which experiences great events regularly, indicate a far less hydrated slab. These results are driven by the preferential alignment of paleo-spreading fabrics of the Pacific plate. Where fabrics are more closely aligned with the orientation of the trench, outer-rise faulting and plate hydration is enhanced. These results highlight the importance of changes inmore »preexisting slab structures and subsequent hydration in the production of great, damaging earthquakes.« less
4. Crustal structure variations in south-central Mexico from receiver functions

   https://doi.org/10.1093/gji/ggz434  

   Rodríguez-Domínguez, Miguel ; Pérez-Campos, Xyoli ; Montealegre-Cázares, Conrado ; Clayton, Robert W. ; Cabral-Cano, Enrique ( October 2019 , Geophysical Journal International)

   Mexico has a complex geological history that is typified by the distinctive terranes that are found in the south-central region. Crustal thickness variations often correlate with geological terranes that have been altered by several processes in the past, for example aerial or subduction erosion, underplating volcanic material or rifting but few geophysical studies have locally imaged the entire continental crust in Mexico. In this paper, the thickness of three layers of the crust in south-central Mexico is determined. To do this, we use P- and S-wave receiver functions (RF) from 159 seismological broad-band stations. Thanks to its adaptive nature, we use an empirical mode decomposition (EMD) algorithm to reconstruct the RFs into intrinsic mode functions (IMF) in order to enhance the pulses related to internal discontinuities within the crust. To inspect possible lateral variations, the RFs are grouped into quadrants of 90°, and their amplitudes are mapped into the thickness assuming a three-layer model. Using this approach, we identify a shallow sedimentary layer with a thickness in the range of 1–4 km. The upper-crust was estimated to be of a few kilometers (<10 km) thick near the Pacific coast, and thicker, approximately 15 km in central Oaxaca and under the Trans-Mexican Volcanicmore »Belt (TMVB). Close to the Pacific coast, we infer a thin crust of approximately 16 ± 0.9 km, while in central Oaxaca and beneath the TMVB, we observe a thicker crust ranging between 30 and 50 km ± 2.0 km. We observe a crustal thinning, of approximately 6 km, from central Oaxaca (37 ± 1.9 km) towards the Gulf of Mexico, under the Veracruz Basin, where we estimate a crustal thickness of 31.6 ± 1.9 km. The boundary between the upper and lower crust in comparison with the surface of the Moho do not show significant variations other than the depth difference. We observe small crustal variations across the different terranes on the study area, with the thinnest crust located at the Pacific coast and Gulf of Mexico coast. The thickest crust is estimated to be in central Oaxaca and beneath the TMVB.

   « less
5. Cretaceous to Miocene magmatism, sedimentation, and exhumation within the Alaska Range suture zone: A polyphase reactivated terrane boundary

   https://doi.org/10.1130/GES02014.1  

   Trop, J. ; Benowitz, J. ( June 2019 , Geosphere)

   The Alaska Range suture zone exposes Cretaceous to Quaternary marine and nonmarine sedimentary and volcanic rocks sandwiched between oceanic rocks of the accreted Wrangellia composite terrane to the south and older continental terranes to the north. New U-Pb zircon ages, 40Ar/39Ar, ZHe, and AFT cooling ages, geochemical compositions, and geological field observations from these rocks provide improved constraints on the timing of Cretaceous to Miocene magmatism, sedimentation, and deformation within the collisional suture zone. Our results bear on the unclear displacement history of the seismically active Denali fault, which bisects the suture zone. Newly identified tuffs north of the Denali fault in sedimentary strata of the Cantwell Formation yield ca. 72 to ca. 68 Ma U-Pb zircon ages. Lavas sampled south of the Denali fault yield ca. 69 Ma 40Ar/39Ar ages and geochemical compositions typical of arc assemblages, ranging from basalt-andesite-trachyte, relatively high-K, and high concentrations of incompatible elements attributed to slab contribution (e.g., high Cs, Ba, and Th). The Late Cretaceous lavas and bentonites, together with regionally extensive coeval calc-alkaline plutons, record arc magmatism during contractional deformation and metamorphism within the suture zone. Latest Cretaceous volcanic and sedimentary strata are locally overlain by Eocene Teklanika Formation volcanic rocks withmore »geochemical compositions transitional between arc and intraplate affinity. New detrital-zircon data from the modern Teklanika River indicate peak Teklanika volcanism at ca. 57 Ma, which is also reflected in zircon Pb loss in Cantwell Formation bentonites. Teklanika Formation volcanism may reflect hypothesized slab break-off and a Paleocene–Eocene period of a transform margin configuration. Mafic dike swarms were emplaced along the Denali fault from ca. 38 to ca. 25 Ma based on new 40Ar/39Ar ages. Diking along the Denali fault may have been localized by strike-slip extension following a change in direction of the subducting oceanic plate beneath southern Alaska from N-NE to NW at ca. 46–40 Ma. Diking represents the last recorded episode of significant magmatism in the central and eastern Alaska Range, including along the Denali fault. Two tectonic models may explain emplacement of more primitive and less extensive Eocene–Oligocene magmas: delamination of the Late Cretaceous–Paleocene arc root and/or thickened suture zone lithosphere, or a slab window created during possible Paleocene slab break-off. Fluvial strata exposed just south of the Denali fault in the central Alaska Range record synorogenic sedimentation coeval with diking and inferred strike-slip displacement. Deposition occurred ca. 29 Ma based on palynomorphs and the youngest detrital zircons. U-Pb detrital-zircon geochronology and clast compositional data indicate the fluvial strata were derived from sedimentary and igneous bedrock presently exposed within the Alaska Range, including Cretaceous sources presently exposed on the opposite (north) side of the fault. The provenance data may indicate ~150 km or more of dextral offset of the ca. 29 Ma strata from inferred sediment sources, but different amounts of slip are feasible. Together, the dike swarms and fluvial strata are interpreted to record Oligocene strike-slip movement along the Denali fault system, coeval with strike-slip basin development along other segments of the fault. Diking and sedimentation occurred just prior to the onset of rapid and persistent exhumation ca. 25 Ma across the Alaska Range. This phase of reactivation of the suture zone is interpreted to reflect the translation along and convergence of southern Alaska across the Denali fault driven by highly coupled flat-slab subduction of the Yakutat microplate, which continues to accrete to the southern margin of Alaska. Furthermore, a change in Pacific plate direction and velocity at ca. 25 Ma created a more convergent regime along the apex of the Denali fault curve, likely contributing to the shutting off of near-fault extension- facilitated arc magmatism along this section of the fault system and increased exhumation rates.« less