An untapped source of amorphous SiO2, industrially generated Indian biomass ash (SA)—90% amorphous, with composition of ~60% SiO2and ~20% unburnt carbon—can be used to produce cementitious and alkali‐activated binders. This study reports dissolution of amorphous Si from SA in 0.5 mol/L and 1 mol/L aqueous NaOH, with and without added Ca(OH)2, at SA:Ca(OH)2wt% ratios of 100:0, 87.5:12.5, and 82.5:17.5. Monitoring of elemental dissolution and subsequent/simultaneous product uptake by ICP‐OES offers an effective process for evaluating utility of industrial wastes in binder‐based systems. After 28 days in solution, up to 68% of total Si is dissolved from SA in 1 mol/L NaOH, with values as much as 38% lower in the presence of Ca(OH)2, due to the formation of tobermorite‐like C‐S‐H. FTIR,29Si MAS‐NMR, and XRD are used to characterize solid reaction products and observe reaction progress. Product chemistries calculated from ICP‐OES results and verified by selective dissolution in EDTA/NaOH—namely, Ca/Si of 0.6‐1 and Na adsorption of 1‐2 mmol/g—are found to be consistent with those indicated by aforementioned techniques. This indicates the efficacy of ICP‐OES in estimating product chemistry via such a methodology.
Microcrystalline zeolites of the gismondine family are often reported in alkali‐activated and blended cement systems. However, little is known about gismondine's compatibility with other cementitious phases to determine stability in long‐term phase assemblage. Experimental studies were conducted to investigate the compositional field of gismondine stability in the lime‐alumina‐silica‐hydrate systems, with a particular focus on understanding the compatibility of gismondine with other cement phases such as C‐S‐H, ettringite, monosulfate, strätlingite, katoite, gypsum, calcite, portlandite, alkali, silica, and aluminosilicate phases. Results show that gismondine‐Ca forms readily at ~85°C in high aluminosilicate compositions; and persists in the presence of calcite, gypsum, ettringite, katoite solid solution, low Ca tobermorite‐like C‐S‐H, silica and aluminosilicate phases, at 20‐85°C. However, gismondine‐Ca reacts with: (a) monosulfate, producing ettringite‐thaumasite solid solution; (b) portlandite, forming tobermorite‐like C‐A‐S‐H gel and siliceous katoite at >55°C; (c) aqueous NaOH, generating gismondine‐(Na,Ca), a garronite‐like zeolite P solid solution; and (d) strätlingite leading to the conversion of strätlingite to gismondine indicating the metastability of strätlingite with respect to gismondine at 55°C. The outcomes are discussed to provide insights into the long‐term phase assemblage of relevant cement systems such as lime‐calcined clay, alkali‐activated materials, and potentially ancient Roman concrete.
more » « less- Award ID(s):
- 1932690
- NSF-PAR ID:
- 10454704
- Publisher / Repository:
- Wiley-Blackwell
- Date Published:
- Journal Name:
- Journal of the American Ceramic Society
- Volume:
- 104
- Issue:
- 3
- ISSN:
- 0002-7820
- Page Range / eLocation ID:
- p. 1513-1525
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract -
Alkali-silica reaction (ASR)'s destructiveness is governed by the compositions and properties of ASR products, while methods of converting these hygroscopic-expansive gel-like products into innocuous phases remain unexploited. In this study, the influence of magnesium nitrate on the evolutions of phase, molecular structure, hydroscopic and mechanical properties of ASR gels with varying Mg/Si ratios from 0.1 to 1.1 was investigated. The results indicate that the primary phases of ASR products, tobermorite-type calcium silicate hydrate (C–S–H) and alkali kanemites, can be suppressed into brucite and eventually converted into magnesium-silicate-hydrate (M-S-H) in the presence of increasing Mg/Si ratios and the consequent decreasing pH. The Si–O–Si bridging bonds and Si–O symmetric stretching in the Q3 sites of ASR products can be suppressed. The phase and structure modifications resulted in a 93.5% reduction in hydroscopic swelling, a 94.7% decrease in strength, and a 152.3% drop in modulus of elasticity rendering the ASR products less destructive.more » « less
-
Although the high efficiency of coupled lithium and saturated metakaolin in alkali-silica reaction mitigation has been documented, its influence on cement hydration remains uninvestigated. In this study, saturated metakaolin with varying degrees of saturation and its combined influence with lithium on the hydration kinetics, phase evolution, and development of microstructure and molecular structures of hydration products in the blended cement composite was investigated. The experimental and thermodynamic modeling results indicate the synergistic effect between saturated metakaolin and lithium in enhancing the hydration of cement, interaction between metakaolin and cement, incorporation of Al in the silicate chains, and precipitations of Al-rich phases. In the blended cement matrix, the dissolution of metakaolin, formation of calcium silicate hydrates with incorporated aluminum (C-(A)-S-H), and precipitation of strätlingite are improved by 19.6%, 17.6%, and 20.0%, respectively, and the formation of cubic siliceous hydrogarnet was triggered.more » « less
-
more » « less
Abstract Synthetic hydrotalcites were produced by a co‐precipitation method. The hydrotalcites are represented by the general formula [MII(1‐x)MIII(x)(OH)2][An−]x/n·zH2O, where MIIis a divalent cation (eg, Mg2+or Ca2+), MIIIis a trivalent cation (eg, Al3+) and An−is the interlayer anion. Herein, MII = Mg, and MIII = Al such that [Mg/Al] = [2, 3] (atomic units) and An−, represents intercalant species including: OH−, SO42−and CO32−anions. The thermochemical data of each compound including their solubility constants (Kso), density and molar volume were quantified at T = 25 ± 0.5°C, and
P = 1 bar. The solubilities of the synthetic hydrotalcites, irrespective of their divalent‐trivalent cation partitioning ratio, scaled as CO32− < SO42− < OH−; in order of decreasing solubility. The type of anion, very slightly, affected the solubility with less than ±1 log unit of variation for [Mg/Al] = 2, and ±2 log units of variation for [Mg/Al] = 3. The solubilities of these phases were strongly correlated with that of gibbsite (Al(OH)3); such that activity of the [AlO2−] species wassolubility determining with increasing pH. The tabulated thermodynamic data were used to construct solid‐solution models for phases encompassing both cation distribution ratios and to calculate stable phase equilibria relevant to alkali‐activated slag (AAS) systems for diverse activator compositions. -
null (Ed.)The effect of hydrogels containing nanosilica (NSi) on the autogenous shrinkage, mechanical strength, and electrical resistivity of cement pastes was studied. The interaction between the hydrogels and the surrounding cementitious matrix was examined using thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM). The addition of hydrogels decreased autogenous shrinkage in the cement pastes and this reduction showed a dependence on the concentration of NSi in the hydrogels. Compressive strength and electrical resistivity were reduced in the cement pastes with hydrogels and this reduction was decreased with increased concentration of NSi in the hydrogel. A change in the phase composition of the cement paste in the region close to the hydrogel was noted, compared to the region away from the hydrogel. In a lime solution with increased pH and temperature, Ca(OH)2 and CaCO3 were found to form within the hydrogels; evidence of calcium-silicate-hydrate (C-S-H) formation in the hydrogels with NSi was obtained, indicating the possible pozzolanic potential of the hydrogels with NSi.more » « less
