An official website of the United States government
This paper presents the development and preliminary implementation of a multi-scale material and mechanics education module to improve undergraduate solid mechanics education. We experimentally characterize 3D printed and conventional wrought aluminum samples and collect structural images and perform testing at the micro- and macro- scales. At the micro-scale, we focus on the visualization of material’s grain structures. At the macro-scale, standard material characterization following ASTM standards is conducted to obtain the macroscopic behavior. Digital image correlation technology is employed to obtain the two-dimensional strain field during the macro-scale testing. An evaluation of student learning of solid mechanics and materials behavior concepts is carried out to establish as baseline before further interventions are introduced. The established multi-scale mechanics and materials testing dataset will be also used in a broad range of undergraduate courses, such as Solid Mechanics, Design of Mechanical Components, and Manufacturing Processes, to inform curricular improvement. The successful implementation of this multi-scale approach for education is likely to enhance students’ understanding of abstract solid mechanics theories and establish links between mechanics and materials concepts. More broadly, this approach will assist advanced solid mechanics education in undergraduate engineering education throughout the country.
more »
« less
Development of a Multiscale Experimentation and Visualization Module for Undergraduate Mechanics Education
Classical mechanics courses are taught to most engineering disciplinary undergraduate students. Due to the recent advancements of multiscale analysis and practice, necessary reforms need to be investigated and explored for classical mechanics courses to address the materials’ mechanics behaviors across multiple length scales. This enhanced understanding is needed for engineering students to consider materials more broadly. This paper presents a recent effort for the development of a multiscale materials and mechanics experimentation (M3E) module that can be potentially implemented in undergraduate mechanics courses, including Statics, Dynamics, Strength of Materials, and Design of Mechanical (Machine) Components. The developed education module introduces the concepts of multiscale materials behavior and microstructures in the form of micro and macro-scales. At the micro-scale, both 3D printed aluminum and cold-rolled aluminum samples were characterized using scanning electron microscope. Microstructures, including grains, grain boundaries, dislocation, precipitates, and micro-voids, were demonstrated to students. At the macro-scale, experiments following ASTM standards were conducted and full strain fields carried by all the samples were analyzed using digital image correlation method. The experimental data were organized and presented to the students in the developed M3E module. The implementation of the developed module in undergraduate mechanics classes allows students to not only visualize materials behavior under various load conditions, but also understand the reasons behind classical mechanics properties. To assess the effectiveness of the developed M3E education module, an evaluation question was developed. Students are required to classify key mechanics, materials, and processing concepts at both micro and macroscales. More than 40 fundamental concepts and keywords are included in the tests. The study outcomes and effectiveness of the M3E education module will be reported in this paper.
more »
« less
- Award ID(s):
- 1712178
- PAR ID:
- 10206106
- Date Published:
- Journal Name:
- 2020 ASEE Virtual Annual Conference
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
This paper presents the development and preliminary implementation of a multi-scale material and mechanics education module to improve undergraduate solid mechanics education. We experimentally characterize 3D printed and conventional wrought aluminum samples and collect structural images and perform testing at the micro- and macro- scales. At the micro-scale, we focus on the visualization of material’s grain structures. At the macro-scale, standard material characterization following ASTM standards is conducted to obtain the macroscopic behavior. Digital image correlation technology is employed to obtain the two-dimensional strain field during the macro-scale testing. An evaluation of student learning of solid mechanics and materials behavior concepts is carried out to establish as baseline before further interventions are introduced. The established multi-scale mechanics and materials testing dataset will be also used in a broad range of undergraduate courses, such as Solid Mechanics, Design of Mechanical Components, and Manufacturing Processes, to inform curricular improvement. The successful implementation of this multi-scale approach for education is likely to enhance students’ understanding of abstract solid mechanics theories and establish links between mechanics and materials concepts. More broadly, this approach will assist advanced solid mechanics education in undergraduate engineering education throughout the country.more » « less
-
ABSTRACT This article presents a laboratory module developed for undergraduate micro/nano engineering laboratory courses in the mechanical engineering departments at the Massachusetts Institute of Technology and King Fahd University of Petroleum and Minerals. In this laboratory, students fabricate superoleophobic membranes by spray-coating of titania nanoparticles on steel meshes, characterize the surfaces and ability of the membrane to retain oil, and then use these membranes to separate an oil-water mixture. The laboratory module covers nanomaterials, nanomanufacturing, materials characterization, and understanding of the concepts of surface tension and hydrostatics, with oil-water separation as an application. The laboratory experiments are easy to set up based on commercially available tools and materials, which will facilitate implementation of this module in other educational institutions. The significance of oil-water separation in the petroleum industry and integration of concepts from fluid mechanics in the laboratory module will help to illustrate the relevance of nanotechnology to mechanical and materials engineering and its potential to address some of the future societal needs.more » « less
-
null (Ed.)Geotechnical engineering undergraduate curriculum typically consist of courses in soil mechanics and foundation design that include a variety of topics that are difficult for students to understand and master. Behavior of the below grade natural and built geomaterials discussed in these courses can be difficult for students to visualize. Typically, the mechanisms of behavior are demonstrated using small-scale laboratory tests, two-dimensional sketches, simple table-top models, or video simulations in the classroom. Students rarely have the opportunity to observe large-scale behavior of foundations in the field or laboratory. The authors from Rose-Hulman Institute of Technology and Saint Louis University designed and implemented a large-scale foundation testing system to address several topics that students tend to struggle with the most, including 1) the difference in strength and service limit states in shallow foundation design, 2) soil-structure interaction associated with lateral behavior of deep foundations, and 3) the influence of near-surface soil on lateral behavior of deep foundations. This paper provides a detailed overview of the design, fabrication, and implementation of two large-scale experiential learning modules for undergraduate courses in soil mechanics and foundation engineering. The first module utilizes shallow foundations in varying configurations to demonstrate the differences in strength and service limit state behavior of shallow foundations. The second module utilizes a relatively flexible pile foundation embedded in sand to demonstrate the lateral behavior of deep foundations. The first module was used in the soil mechanics courses at Rose-Hulman Institute of Technology and Saint Louis University to compare theoretical and observed behavior of shallow foundations. The second module was used in the foundation engineering course at Rose-Hulman Institute of Technology to illustrate the concepts of soil-structure interaction and the influence of near-surface soil on lateral behavior of deep foundations.more » « less
-
null (Ed.)Computational methods have become increasingly used in both academia and industry. At the University of Illinois Urbana Champaign, the Department of Materials Science and Engineering (MSE), as part of a university-funded educational innovation program, has integrated computation throughout its undergraduate courses since 2014. Within this curriculum, students are asked to solve practical problems related to their coursework using computational tools in all required courses and some electives. Partly in response to feedback from students, we have expanded our current curriculum to include more computational modules. A computational module was added to the freshman Introduction to Materials Science and Engineering class; thus, students will be expected to use computational tools from their first year onwards. In this paper, we survey students who are currently taking courses with integrated computation to explore the effects of gradually introducing students to programming as well as both macro- and micro-scale simulations over multiple years. We investigate the improving confidence level of students, their attitude towards computational tools, and their satisfaction with our curriculum reform. We also updated our survey to be more detailed and consistent between classes to aid in further improvements of our MSE curriculum.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Paper:
- https://doi.org/10.18260/1-2--34450
