skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.


Title: Measurements to determine the mixing state of black carbon emitted from the 2017–2018 California wildfires and urban Los Angeles
Abstract. The effects of atmospheric black carbon (BC) on climate and public health have been well established, but large uncertainties remain regarding the extent of the impacts of BC at different temporal and spatial scales. These uncertainties are largely due to the heterogeneous nature of BC in terms of its spatiotemporal distribution, mixing state, and coating composition. Here, we seek to further understand the size and mixing state of BC emitted from various sources and aged over different timescales using field measurements in the Los Angeles region. We measured refractory black carbon (rBC) with a single-particle soot photometer (SP2) on Catalina Island, California (∼70 km southwest of downtown Los Angeles) during three different time periods. During the first campaign (September 2017), westerly winds were dominant and measured air masses were representative of well-aged background over the Pacific Ocean. In the second and third campaigns (December 2017 and November 2018, respectively), atypical Santa Ana wind conditions allowed us to measure biomass burning rBC (BCbb) from air masses dominated by large biomass burning events in California and fossil fuel rBC (BCff) from the Los Angeles Basin. We observed that the emissions source type heavily influenced both the size distribution of the rBC cores and the rBC mixing state. BCbb had thicker coatings and larger core diameters than BBff. We observed a mean coating thickness (CTBC) of ∼40–70 nm and a count mean diameter (CMD) of ∼120 nm for BCbb. For BCff, we observed a CTBC of ∼5–15 nm and a CMD of ∼100 nm. Our observations also provided evidence that aging led to an increased CTBC for both BCbb and BCff. Aging timescales < ∼1 d were insufficient to thickly coat freshly emitted BCff. However, CTBC for aged BCff within aged background plumes was ∼35 nm thicker than CTBC for fresh BCff. Likewise, we found that CTBC for aged BCbb was ∼18 nm thicker than CTBC for fresh BCbb. The results presented in this study highlight the wide variability in the BC mixing state and provide additional evidence that the emissions source type and aging influence rBC microphysical properties.  more » « less
Award ID(s):
1752522
PAR ID:
10209023
Author(s) / Creator(s):
; ;
Date Published:
Journal Name:
Atmospheric Chemistry and Physics
Volume:
20
Issue:
24
ISSN:
1680-7324
Page Range / eLocation ID:
15635 to 15664
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Fossil fuel carbon dioxide emissions (ffCO2) constitute the majority of greenhouse gas emissions and are the main determinent of global climate change. The COVID-19 pandemic caused wide-scale disruption to human activity and provided an opportunity to evaluate our capability to detect ffCO2 emission reductions. Quantifying changes in ffCO2 levels is especially challenging in cities, where climate mitigation policies are being implemented but local emissions lead to spatially and temporally complex atmospheric mixing ratios. Here, we used direct observations of on-road CO2 mixing ratios with analyses of the radiocarbon (14C) content of annual grasses collected by community scientists in Los Angeles and California, USA to assess reductions in ffCO2 emissions during the first two years of the COVID-19 pandemic. With COVID-19 mobility restrictions in place in 2020, we observed a significant reduction in ffCO2 levels across California, especially in urban centers. In Los Angeles, CO2 enhancements on freeways were 60 ± 16% lower and ffCO2 levels were 38-52% lower than in pre-pandemic years. By 2021, California's ffCO2 levels rebounded to pre-pandemic levels, albeit with substantial spatial heterogeneity related to local and regional pandemic measures. Taken together, our results indicate that a reduction in traffic emissions by ~60% (or 10-24% of Los Angeles' total ffCO2 emissions) can be robustly detected by plant 14C analysis, and pave the way for mobile- and plant-based monitoring of ffCO2 emissions in cities without CO2 monitoring infrastructure such as those in the Global South. 
    more » « less
  2. Anthropogenic climate change—combined with increased human-caused ignitions—is leading to increased wildfire frequency, carbon dioxide emissions, and refractory black carbon (rBC) aerosol emissions. This is particularly evident in the Amazon rainforest, where fire activity has been complicated by the synchronicity of natural and anthropogenic drivers of ecological change, coupled with spatial and temporal heterogeneity in past and present land use. One approach to elucidating these factors is through long-term regional fire histories. Using a novel method for rBC determinations, we measured an approximately 3500-year sediment core record from Lake Caranã in the eastern Amazon for rBC influx, a proxy of biomass burning and fossil fuel combustion. Through comparisons with previously published records from Lake Caranã and regional evidence, we distinguished between local and regional rBC emission sources demonstrating increased local emissions of rBC from ~1250 to 500 calendar years before present (cal yr BP), coinciding with increased local-scale fire management during the apex of pre-Columbian activity. This was followed by a regional decline in biomass burning coincident with European contact, pre-Columbian population decline, and regional fire suppression associated with the rubber boom (1850–1910 CE), supporting the minimal influence of climate on regional burning at this time. During the past century, rBC influx has rapidly increased. Our results can serve to validate rBC modeling results, aiding with future predictions of rBC emissions and associated impacts to the climate system. 
    more » « less
  3. With deforestation and associated fires ongoing at high rates, and amidst urgent need to preserve Amazonia, improving the understanding of biomass burning emissions drivers is essential. The use of orbital remote sensing data enables the estimate of both biomass burning emissions and deforestation. In this study, we have estimated emissions of particulate matter with diameter less than 2.5 µm (PM2.5) associated with biomass burning, a primary human health risk, using the Brazilian Biomass Burning emission model with Fire Radiative Power (3BEM_FRP), and estimated deforestation based on the MapBiomas dataset. Using these estimates, we have assessed for the first time how deforestation drove biomass burning emissions in Amazonia over the last two decades at three scales of analysis: Amazonia-wide, country/state and pixel. Amazonia accounted for 48% of PM2.5 emitted from biomass burning in South America and current deforestation rates have reached values on par with those of the early 21st Century. Emissions and deforestation were concentrated in the Eastern and Central-Southern portions of Amazonia. Amazonia-wide deforestation and emissions were linked through time (R = 0.65). Countries/states with the widest spread agriculture were less likely to be correlated at this scale, likely because of the importance of biomass burning in agricultural practices. Concentrated in regions of ongoing deforestation, in 18% of Amazonia grid cells PM2.5 emissions associated with biomass burning and deforestation were significantly positively correlated. Deforestation is an important driver of emissions in Amazonia but does not explain biomass burning alone. Therefore, future work must link climate and other non-deforestation drivers to completely understand biomass burning emissions in Amazonia. The advance of anthropogenic activities over forested areas, which ultimately leads to more fires and deforestation, is expected to continue, worsening a crisis of dangerous emissions. 
    more » « less
  4. null (Ed.)
    Abstract. There are many fuels used for domestic purposes in east Africa, producing a significant atmospheric burden of the resulting aerosols, which includes biomass burning particles. However, the aerosol physicochemical properties are poorly understood. Here, the combustion of eucalyptus, acacia, and olive fuels was performed at 500 and 800 ∘C in a tube furnace, followed by immediate filter collection for fresh samples or introduction into a photochemical chamber to simulate atmospheric photochemical aging under the influence of anthropogenic emissions. The aerosol generated in the latter experiment was collected onto filters after 12 h of photochemical aging. 500 and 800 ∘C were selected to simulate smoldering and flaming combustion, respectively, and to cover a range of combustion conditions. Methanol extracts from Teflon filters were analyzed by ultra-performance liquid chromatography interfaced to both a diode array detector and an electrospray ionization high-resolution quadrupole time-of-flight mass spectrometer (UPLC/DAD-ESI-HR-QTOFMS) to determine the light absorption properties of biomass burning organic aerosol constituents chemically characterized at the molecular level. Few chemical or UV–visible (UV: ultraviolet) differences were apparent between samples for the fuels when combusted at 800 ∘C. Differences in single-scattering albedo (SSA) between fresh samples at this temperature were attributed to compounds not captured in this analysis, with eucalyptol being one suspected missing component. For fresh combustion at 500 ∘C, many species were present; lignin pyrolysis and distillation products are more prevalent in eucalyptus, while pyrolysis products of cellulose and at least one nitro-aromatic species were more prevalent in acacia. SSA trends areconsistent with this, particularly if the absorption of those chromophoresextends to the 500–570 nm region. Upon aging, both show that resorcinolor catechol was removed to the highest degree, and both aerosol types weredominated by loss of pyrolysis and distillation products, though they differed in the specific compounds being consumed by the photochemical aging process. 
    more » « less
  5. Refractory black carbon (rBC) aerosols in air and precipitation result from incomplete combustion. Prior to 18th century industrialization, the primary emission sources were wildfires and agricultural fires. After industrialization, fossil fuel burning has become an important emission source as well. Because these aerosols are import contributors to Earth’s radiative forcing both in the air and when deposited to bright surfaces such as fresh snow, quantifying past rBC emissions is critical to accurate Earth System Modeling. This data set contains 1750 to 2010 annual rBC depositional fluxes measured in a global array of 31, mostly polar ice cores. They were used (Zhang et al., Nature Communications, 2024) to reconstruct atmospheric rBC emissions using the atmospheric chemical transport GEOS-Chem. Details on the rBC measurement methods and chronology development are provided in the associated references for the individual ice core records. 
    more » « less