An official website of the United States government
Process Variation in Spoof Plasmon Interconnect: Consequences and Compensations
The concept of chip-to-chip information propagation by spoof surface plasmon polariton (SSPP) metasurface at terahertz frequency has been introduced of late, that promises data transfer with high bandwidth, low crosstalk, and low energy consumption. As the exotic electromagnetic properties of the metasurface derive from its designed geometric pattern and periodicity, any possible variation of fabrication process parameters may affect the design pattern and consequently, the information capacity of SSPP interconnects. In this work, we have investigated the extent of performance degradation of SSPP interconnect with the statistical variation of the geometric pattern of the metasurface. We also described the technique of the design of an appropriate analog circuit so that the loss of signal integrity incurred by the process variation can be recuperated in real-time.
more »
« less
- Award ID(s):
- 1727610
- PAR ID:
- 10209216
- Date Published:
- Journal Name:
- 2020 IEEE Radio and Wireless Symposium (RWS)
- Page Range / eLocation ID:
- 283 - 286
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
Metasurface design tends to be tedious and time-consuming based on sweeping geometric parameters. Common numerical simulation techniques are slow for large areas, ultra-fine grids, and/or three-dimensional simulations. Simulation time can be reduced by combining the principle of the discrete dipole approximation (DDA) with analytical solutions for light scattered by a dipole near a flat surface. The DDA has rarely been used in metasurface design, and comprehensive benchmarking comparisons are lacking. Here, we compare the accuracy and speed of three DDA methods—substrate discretization, two-dimensional Cartesian Green’s functions, and one-dimensional (1D) cylindrical Green’s functions—against the finite difference time domain (FDTD) method. We find that the 1D cylindrical approach performs best. For example, the s-polarized field scattered from a silica-substrate-supported 600 × 180 × 60 nm gold elliptic nanocylinder discretized into 642 dipoles is computed with 0.78 % pattern error and 6.54 % net power error within 294 s, which is 6 times faster than FDTD. Our 1D cylindrical approach takes advantage of parallel processing and also gives transmitted field solutions, which, to the best of our knowledge, is not found in existing tools. We also examine the differences among four polarizability models: Clausius–Mossotti, radiation reaction, lattice dispersion relation, and digitized Green’s function, finding that the radiation reaction dipole model performs best in terms of pattern error, while the digitized Green’s function has the lowest power error.more » « less
-
Abstract Metasurfaces, as a two-dimensional (2D) version of metamaterials, have drawn considerable attention for their revolutionary capability in manipulating the amplitude, phase, and polarization of light. As one of the most important types of metasurfaces, geometric metasurfaces provide a versatile platform for controlling optical phase distributions due to the geometric nature of the generated phase profile. However, it remains a great challenge to design geometric metasurfaces for realizing spin-switchable functionalities because the generated phase profile with the converted spin is reversed once the handedness of the incident beam is switched. Here, we propose and experimentally demonstrate chiral geometric metasurfaces based on intrinsically chiral plasmonic stepped nanoapertures with a simultaneously high circular dichroism in transmission (CDT) and large cross-polarization ratio (CPR) in transmitted light to exhibit spin-controlled wavefront shaping capabilities. The chiral geometric metasurfaces are constructed by merging two independently designed subarrays of the two enantiomers for the stepped nanoaperture. Under a certain incident handedness, the transmission from one subarray is allowed, while the transmission from the other subarray is strongly prohibited. The merged metasurface then only exhibits the transmitted signal with the phase profile of one subarray, which can be switched by changing the incident handedness. Based on the chiral geometric metasurface, both chiral metasurface holograms and the spin-dependent generation of hybrid-order Poincaré sphere beams are experimentally realized. Our approach promises further applications in spin-controlled metasurface devices for complex beam conversion, image processing, optical trapping, and optical communications.more » « less
-
Abstract In this work, mode conversion and wavefront shaping by integrating a metallic metasurface on top of a planar waveguide are proposed and demonstrated. The metasurface consists of C‐shaped nanoantennas. By controlling the orientation of each nanoantenna, mode conversion and focusing effect for the cross‐polarized electric fields inside the waveguide are achieved. The design and simulation results of 16 scenarios of wideband transverse‐magnetic to transverse‐electric mode converters with the mode purity up to 98%, and on‐chip lenses at the wavelength of 1550 nm are reported. It is worth noting that the dimension of the devices along the propagation direction is only 9.6 µm. This work manifests the potential application of mode division multiplexing systems and on‐chip optical interconnections based on metasurfaces.more » « less
-
Most chiral metamaterials and metasurfaces are designed to operate in a single wavelength band and with a certain circular dichroism (CD) value. Here, mid-infrared chiral metasurface absorbers with selective CD in dual-wavelength bands are designed and demonstrated. The dual-band CD selectivity and tunability in the chiral metasurface absorbers are enabled by the unique design of a unit cell with two coupled rectangular bars. It is shown that the sign of CD in each wavelength band can be independently controlled and flipped by simply adjusting the geometric parameters, the width and the length, of the vertical rectangular bars. The mechanism of the dual-band CD selection in the chiral metasurface absorber is further revealed by studying the electric field and magnetic field distributions of the antibonding and bonding modes supported in the coupled bars under circularly polarized incident light. Furthermore, the chiral resonance wavelength can be continuously increased by scaling up the geometric parameters of the metasurface unit cell. The demonstrated results will contribute to the advance of future mid-infrared applications such as chiral molecular sensing, thermophotovoltaics, and optical communication.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Paper:
- https://doi.org/10.1109/RWS45077.2020.9050129
