skip to main content


Title: Web-based Interactive Polyhedral Graphics Statics Platform
This paper introduces a web-based interactive educational platform for 3D/polyhedral graphic statics (PGS) [1]. The Block Research Group (BRG) at ETH Zürich developed a dynamic learning and teaching platform for structural design. This tool is based on traditional graphic statics. It uses interactive 2D drawings to help designers and engineers with all skill levels to understand and utilize the methods [2]. However, polyhedral graphic statics is not easy to learn because of its characteristics in three-dimensional. All the existing computational design tools are heavily dependent on the modeling software such as Rhino or the Python-based computational framework like Compass [3]. In this research, we start with the procedural approach, developing libraries using JavaScript, Three.js, and WebGL to facilitate the construction by making it independent from any software. This framework is developed based on the mathematical and computational algorithms deriving the global equilibrium of the structure, optimizing the balanced relationship between the external magnitudes and the internal forces, visualizing the dynamic reciprocal polyhedral diagrams with corresponding topological data. This instant open-source application and the visualization interface provide a more operative platform for students, educators, practicers, and designers in an interactive manner, allowing them to learn not only the topological relationship but also to deepen their knowledge and understanding of structures in the steps for the construction of the form and force diagrams and analyze it. In the simplified single-node example, the multi-step geometric procedures intuitively illustrate 3D structural reciprocity concepts. With the intuitive control panel, the user can move the constraint point’s location through the inserted gumball function, the force direction of the form diagram will be dynamically changed from compression-only to tension and compression combined. Users can also explore and design innovative, efficient spatial structures with changeable boundary conditions and constraints through real-time manipulating both force distribution and geometric form, such as adding the number of supports or subdividing the global equilibrium in the force diagram. Eventually, there is an option to export the satisfying geometry as a suitable format to share with other fabrication tools. As the online educational environment with different types of geometric examples, it is valuable to use graphical approaches to teach the structural form in an exploratory manner.  more » « less
Award ID(s):
1944691
NSF-PAR ID:
10209903
Author(s) / Creator(s):
;
Date Published:
Journal Name:
International Association of Shell and Spatial Structures
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. This research investigates the use of graphic statics in analyzing the structural geometry of a natural phenomenon to understand their performance and their relevant design parameters. Nature has always been inspiring for designers, engineers, and scientists. Structural systems in nature are constantly evolving to optimize themselves with their boundary conditions and the applied loads. Such phenomena follow certain design rules that are quite challenging for humans to formulate or even comprehend. A dragonfly wing is an instance of a high-performance, lightweight structure that has intrigued many researchers to investigate its geometry and its performance as one of the most light-weight structures designed by nature [1]. There are extensive geometrical and analytical studies on the pattern of the wing, but the driving design logic is not clear. The geometry of the internal members of the dragonfly wings mainly consists of convex cells which may, in turn, represent a compression-only network on a 2D plane. However, this phenomenon has never been geometrically analyzed from this perspective to confirm this hypothesis. In this research, we use the methods of 2D graphic statics to construct the force diagram from the given structural geometry of the wing. We use algebraic and geometric graphic statics to unfold the topological and geometric properties of the form and force diagrams such as the degrees of indeterminacies of the network [2]. We then reconstruct the compression-only network of the wing for more than 300 cases for the same boundary conditions and the edge lengths of the independent edges of the network. Comparing the magnitude of the internal forces of the reconstructed network with the actual structure of the wing using the edge length of the force diagram will shed light on the performance of the structure. Multiple analytical studies will be provided to compare the results in both synthetic and natural networks and drive solid conclusions. The success in predicting the internal force flow in the natural structural pattern using graphic statics will expand the use of these powerful methods in reproducing the exact geometry of the natural structural system for use in many engineering and scientific problems. It will also ultimately help us understand the design parameters and boundary conditions for which nature produces its masterpieces. 
    more » « less
  2. The recent development of three-dimensional graphic statics (3DGS) has greatly increased the ease of designing complex and efficient spatial funicular structural forms [1]. The reciprocal diagram based 3DGS approaches not only generate highly efficient funicular structures [2], but also result in planarity constraints due to the polyhedron nature of the reciprocal diagrams [3]. Our previous research has shown the feasibility of leveraging this planarity by using planar glass sheets to materialize the 10m-span, double-layer glass bridge [3]. This paper is framed as a proof of concept for the 10m bridge and explores the form-finding, detail configuration, fabrication constraints, and assembly logic by designing and constructing a small-scale bridge prototype with a span of 2.5m. The prototype is designed in a modular approach, where each polyhedral cell of the form is materialized using a hollow glass unit (HGU) (Figure 1a), which can be prefabricated and preassembled, and therefore, greatly simplifies the assembly of the whole bridge. The compression-only form of the prototype is generated using the PolyFrame beta [4] plug-in for Rhinoceros [5]. The form-finding is carried out with a comprehensive consideration of a variety of parameters, including fabrication constraints, assembly ease, construction cost, and practicality. To start the form-finding process, a group of closed convex force polyhedrons is aggregated, controlling the topology of the form diagram and the orientations of the form elements. By manipulating the face tilting angles of the force diagram, the supported edges at the end of the bridge are all made horizontal, reducing the difficulty of the support design. Then, vertex locations and edge lengths of the form diagram are constrained, determining the final dimensions of both the bridge and the cells. After getting the geometry of the bridge, the detail developments are streamlined. Each of the 13 HGUs consists of two flat deck plates and a series of side plates (Figure 1b). To interlock the adjacent cells and prevent possible sliding, a male-female connection mechanism is introduced to the conjoint side plates of the HGUs (Figure 1b). Additionally, to eliminate the direct contact of the glass parts and prevent the stress concentration, two softer transparent materials are involved for connecting purposes. Within each HGU, silicon-based binding agent is used to hold the glass parts together; between the neighboring HGUs, plastic sheets are placed as interface materials (Figure 1b). Figure 1. a) The 2.5m-span small-scale prototype dome, b) Exploded view showing deck plates, side plates, male-female connection, and interface material For the fabrication of the glass parts, 5-axis Waterjet cutting techniques are applied. While the glass sheets for the deck plates can be purchased from the market, the irregular side plates with male-female connections need to be made from kiln-cast glass. In terms of the Waterjet cutting constraints, there is a max cutting angle of 60 degrees from vertical. With respect to this, all the glass parts are examined during the design process to ensure they all satisfy the cutting angle requirements. Aiming to achieve a fast and precise assembly, several assistant techniques are developed. On the local HGU level, assembly connectors are designed and 3D-printed to help locate the glass parts. On the global prototype level, the assembly sequence of the HGUs are simulated to avoid interference. Besides, a labeling system is also established to organize the fabricated parts and guide the entire assembly process. The design and construction of this small-scale prototype provide important information for the future development of the full-scale bridge regarding the interlocking detail design, the fabrication constraints, and assembly logic. The actual structural performance of the prototype awaits further investigation through-loading experiments. 
    more » « less
  3. The Auxetic materials are structural systems with a negative Poisson’s ratio. Such materials show unexpected behavior when subjected to uni-axial compression or tension forces. For instance, they expand perpendicular to the direction of an applied compressive force. This behavior is the result of their internal structural geometry. These materials, with their unique behavior, have recently found many applications in the fields of sensors, medical devices, sport wears, and aerospace. Thus, there is a lot of relevant research in the artificial design of auxetic metamaterials and the prediction of their behavior [2]. Since the behavior of these materials heavily relies on the geometry of their internal structure, the geometry-based methods of structural design, known as graphic statics, are very well suited to derive their geometry or describe their behavior. Nevertheless, graphic statics has never been used in the design of such materials. For the first time, this paper provides an introduction to the use of graphic statics in the design and form-finding of auxetic metamaterials. The paper explains multiple equilibrium states of various auxetic structures using algebraic formulations of 2d/3d graphic statics [1, 3]. Moreover, it sheds light on the geometric behavior of auxetic materials by changing the force diagram of graphic statics. Therefore, it suggests a novel approach in predicting the changes in the geometry of the material under various loading conditions by controlling the force equilibrium geometrically. 
    more » « less
  4. This paper presents procedures to generate truss topologies as an input form for polyhedral graphic statics and develops an algebraic formulation to construct their force diagrams. The study's ultimate goal is to extend the authors' previous research in 2D [1] to generate 3D strut-and-tie models and stress fields for reinforced concrete design. The recent algebraic formulation constructs reciprocal polyhedral diagrams of 3D graphic statics with either form or force as input [2]. However, the input is usually a set of polyhedrons or self-stressed networks [3]. Another implementation of polyhedral graphic statics [4] includes general truss topologies. But the starting geometry is usually the global force diagram, and based on its modification or subdivision, a form diagram is constructed. Therefore, currently, there exists no formulation to analyze a spatial truss using polyhedral graphic statics. This paper develops an algorithm to build upon the algebraic 3D graphic statics formulation and notation [2, 5] to construct the force diagram for input geometries that do not include all closed cells. The article also shows how the proper definition of the external spaces between the applied loads and reaction forces and the tetrahedral subdivision of the truss makes it possible to construct the reciprocal force diagram. This technique can be further explored to generate various truss topologies for a given volume and identify an optimized solution as the strut-and-tie model for reinforced concrete. Figure 1 illustrates an example of a spatial truss with two vertical applied loads and four vertical supports, the subdivision of the inner and outer space, the constructed force diagram, and the Minkowski sum of the dual diagrams (i.e., the geometrical summation of the form and scaled force diagram). 
    more » « less
  5. This paper introduces an interactive form-finding technique to design and explore continuous Shellular Funicular Structures in the context of Polyhedral Graphic Statics (PGS). Shellular funicular forms are two-manifold shell-based geometries dividing the space into two interwoven sub-spaces, each of which can be represented by a 3D graph named labyrinth [1]. Both form and force diagrams include labyrinths, and the form finding is achieved by an iterative subdivision of the force diagram across its labyrinths [2]. But this iterative process is computationally very expensive, preventing interactive exploration of various forms for an initial force diagram. The methodology starts with identifying three sets of labyrinth graphs for the initial force diagram and immediately visualizing their form diagrams as smooth and continuous surfaces. Followed by exploring and finalizing the desired form, the force diagram will be subdivided across the desired labyrinth graph to result in a shellular funicular form diagram (Figure 1). The paper concludes by evaluating the mechanical performance of continuous shellular structures compared to their discrete counterparts. 
    more » « less