More Like this

1. Deposition Behavior of Polyaniline on Carbon Nanofibers by Oxidative Chemical Vapor Deposition

   https://doi.org/10.1021/acs.langmuir.0c02539  

   Li, Xiaobo; Rafie, Ayda; Kalra, Vibha; Lau, Kenneth K. (November 2020, Langmuir)

   null (Ed.)
2. Compressibility in Fused Deposition Modeling

   David O. Kazmer; Amy M. Peterson (May 2022, Society of Plastics Engineering Annual Technical Conference, Additive Manufacturing Division)

   Fused deposition modeling (FDMTM), also referred to as fused filament fabrication (FFF) is an additive manufacturing technique in which extruded material is deposited into roads and layers to form complex products. This paper provides a physics-based model for predicting and controlling the effect of compressibility in material extrusion including elasticity in the driven filament and compression of the melt in the hot end. The model is validated with a test part embodying a full factorial design of experiments with three print speeds. The model is used for control and shows elimination of 50% of the associated road width variance due to compressibility, thereby enabling higher quality levels even at higher print speeds. 

   more » « less
3. Nitrogen Deposition and Terrestrial Biodiversity

   https://doi.org/10.1016/B978-0-12-822562-2.00079-7  

   Holguin, Jennifer; McLaren, Jennie R; Collins, Scott L (January 2024, Elsevier)
4. Controlling the Morphology of PEDOT:PSS Blend Films with Pre-Deposition Solution Composition and Deposition Technique

   https://doi.org/10.1021/acsapm.1c00748  

   Heroux, Luke; Moncada, Josh; Dadmun, Mark (December 2021, ACS Applied Polymer Materials)
5. High deposition rate wire-arc directed energy deposition of 316L and 316LSi: Process exploration and modelling

   https://doi.org/10.1016/j.msea.2023.145044  

   Hagen, Luc; Yu, Zhenzhen; Clarke, Amy; Clarke, Kester; Tate, Stephen; Petrella, Anthony; Klemm-Toole, Jonah (July 2023, Materials Science and Engineering: A)