skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Thermoset composite recycling – Driving forces, development, and evolution of new opportunities
Thermoset composites represent a substantial challenge for recycling, even as composite products increase in market interest. The concept of putting all future thermoset composite products into landfills over the next decades is unlikely to continue. This paper examines the three eras in the history of thermoset product recycling, the drivers for increased recycling, and possible future trends. Technology for managing thermoset composite products at end-of-life first focused on retrieving fiber and to a lesser extent resin. Then in a second era, research focused on better utilization of recovered fiber and finally the third era is now keeping more of the original resin–fiber structure to reuse these composites. Drivers are emerging to stimulate thermoset recycling, including States with success in recycling other challenging products (tires, carpets, automobile parts, etc.) setting policy and fees to encourage recycling. The evolution of heat recovery as a thermoset recycling option in Europe is another driver. Additionally, efforts at certification of recycled fiber quality may stimulate greater reuse.  more » « less
Award ID(s):
1743682
PAR ID:
10213561
Author(s) / Creator(s):
; ; ; ;
Date Published:
Journal Name:
Journal of Composite Materials
Volume:
52
Issue:
8
ISSN:
0021-9983
Page Range / eLocation ID:
1033 to 1043
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; (, Materials Horizons)
    3D printing allows for moldless fabrication of continuous fiber composites with high design freedom and low manufacturing cost per part, which makes it particularly well-suited for rapid prototyping and composite product development. Compared to thermal-curable resins, UV-curable resins enable the 3D printing of composites with high fiber content and faster manufacturing speeds. However, the printed composites exhibit low mechanical strength and weak interfacial bonding for high-performance engineering applications. In addition, they are typically not reprocessable or repairable; if they could be, it would dramatically benefit the rapid prototyping of composite products with improved durability, reliability, cost savings, and streamlined workflow. In this study, we demonstrate that the recently emerged two-stage UV-curable resin is an ideal material candidate to tackle these grand challenges in 3D printing of thermoset composites with continuous carbon fiber. The resin consists primarily of acrylate monomers and crosslinkers with exchangeable covalent bonds. During the printing process, composite filaments containing up to 30.9% carbon fiber can be rapidly deposited and solidified through UV irradiation. After printing, the printed composites are subjected to post-heating. Their mechanical stiffness, strength, and inter-filament bonding are significantly enhanced due to the bond exchange reactions within the thermoset matrix. Furthermore, the utilization of the two-stage curable resin enables the repair, reshaping, and recycling of 3D printed thermosetting composites. This study represents the first detailed study to explore the benefits of using two-stage UV curable resins for composite printing. The fundamental understanding could potentially be extended to other types of two-stage curable resins with different molecular mechanisms. 
    more » « less
  2. ; ; ; (, SAMPE-North America)
    Thermoset polymer composites, known for their outstanding thermal, mechanical, and chemical properties, have found applications in diverse fields, including aerospace and automotive industries. These polymers, once cured, cannot be recycled, making the end-of-life management of these composites very difficult and posing an environmental challenge. Conventional recycling methods are unsuitable for thermosets, forcing their accumulation in landfills and raising environmental concerns. One possible solution to overcome this concern is to use resins or curing agents, or both, made from biodegradable materials. This study explores the fabrication and characterization of polymer composites using a commercially available green curing agent made from biomass. The composite laminates were fabricated using HVARTM (Heated Vacuum Assisted Resin Transfer Molding) process. In this process, heat pads are used to increase the temperature of both the epoxy resin and the plain weave carbon fiber laminate to a desired temperature, providing ease of flow to the resin. Small coupons were cut from the laminate using a water jet machine to study the flexural behavior of the composite in accordance with ASTM testing standards and compared with composite coupons fabricated using conventional epoxy resin. 
    more » « less
  3. ; ; ; (, SAMPE 2023)
    This presentation will describe conditions for the use of oxygen as a reagent for the selective cleavage of thermoset composites. Carbon fiber-reinforced polymer (CFRP) composites have a prominent role in aviation, sporting goods, marine, and other manufacturing sectors and are accumulating en masse as waste, both at end-of-life and as manufacturing defects. We have recently introduced a method to use oxygen itself along with an appropriate catalyst selectively to disassemble such fully-cured composite wastes to recover both ordered carbon fiber sheets and organic materials suitable for re-manufacturing of second-life resin systems. 
    more » « less
  4. ; ; ; ; ; (, Zenodo)
    This study compared the mechanical properties of a recyclable flax fiber reinforced polymer composite (FFRP) with a covalent adaptable network (CAN) matrix to an FFRP composite with a conventional (unrecyclable) epoxy resin matrix. The results indicated that composites fabricated via vacuum-assisted resin transfer molding (VARTM) exhibited up to 19% higher tensile modulus and strength compared to those fabricated via hand layup, attributed to reduced air void content and more uniform fiber alignment. Microscopy evidence supported by mechanical property tests revealed superior adhesion of the CAN matrix to flax fibers compared to conventional epoxy resin. Additionally, a solvent-based method was demonstrated for separating fibers from the CAN matrix, facilitating reuse or upcycling. 
    more » « less
  5. ; ; ; ; (, Annual Technical Conference - ANTEC, Conference Proceedings)
    The viscoelastic properties of carbon fiber reinforced thermoset composites are of utmost importance during processing such materials using composite forming. The quality of the manufactured parts is largely dependent on intelligent process parameter selection based on the viscoelastic and flow properties of the polymer resin. Viscoelastic properties such as the complex viscosity (η*), storage modulus (G'), loss modulus (G''), and loss tangent (tanδ) are used to determine the critical transition events (such as gelation) during curing. An understanding of the changes in viscoelastic properties as a function of processing temperature and degree of cure provides insight to establish a suitable processing range for compression forming of prepreg systems. However, tracking viscoelastic properties as a function of cure during the forming process is a challenging task. In this current work, we have investigated the effect of sample size and adhesive type on the rheological properties of a commercially available carbon fiber prepreg material. Specifically, determining the linear viscoelastic region (LVE) as a function of sample configuration and different adhesive chemistries were explored. The results suggest that the square-shaped sample geometries coupled with cyanoacrylate based adhesive are optimum for conducting rheological characterization on the carbon fiber prepreg system. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email