Tandem catalysis couples multiple reactions and promises to improve chemical processing, but precise spatiotemporal control over reactive intermediates remains elusive. We used atomic layer deposition to grow In 2 O 3 over Pt/Al 2 O 3 , and this nanostructure kinetically couples the domains through surface hydrogen atom transfer, resulting in propane dehydrogenation (PDH) to propylene by platinum, then selective hydrogen combustion by In 2 O 3 , without excessive hydrocarbon combustion. Other nanostructures, including platinum on In 2 O 3 or platinum mixed with In 2 O 3 , favor propane combustion because they cannot organize the reactions sequentially. The net effect is rapid and stable oxidative dehydrogenation of propane at high per-pass yields exceeding the PDH equilibrium. Tandem catalysis using this nanoscale overcoating geometry is validated as an opportunity for highly selective catalytic performance in a grand challenge reaction.
more »
« less
The effect of strong metal–support interaction (SMSI) on Pt–Ti/SiO 2 and Pt–Nb/SiO 2 catalysts for propane dehydrogenation
In this study, we show how strong metal–support interaction (SMSI) oxides in Pt–Nb/SiO 2 and Pt–Ti/SiO 2 affect the electronic, geometric and catalytic properties for propane dehydrogenation. Transmission electron microscopy (TEM), CO chemisorption, and decrease in the catalytic rates per gram Pt confirm that the Pt nanoparticles were partially covered by the SMSI oxides. X-ray absorption near edge structure (XANES), in situ X-ray photoelectron spectroscopy (XPS), and resonant inelastic X-ray scattering (RIXS) showed little change in the energy of Pt valence orbitals upon interaction with SMSI oxides. The catalytic activity per mol of Pt for ethylene hydrogenation and propane dehydrogenation was lower due to fewer exposed Pt sites, while turnover rates were similar. The SMSI oxides, however, significantly increase the propylene selectivity for the latter reaction compared to Pt/SiO 2 . In the SMSI catalysts, the higher olefin selectivity is suggested to be due to the smaller exposed Pt ensemble sites, which result in suppression of the alkane hydrogenolysis reaction; while the exposed atoms remain active for dehydrogenation.
more »
« less
- Award ID(s):
- 1647722
- PAR ID:
- 10217751
- Date Published:
- Journal Name:
- Catalysis Science & Technology
- Volume:
- 10
- Issue:
- 17
- ISSN:
- 2044-4753
- Page Range / eLocation ID:
- 5973 to 5982
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Recently, stable non-oxidative conversion of methane (NOCM) for up to 8 h with a C 2 selectivity greater than 90% has been reported over Pt–Bi/ZSM-5 at moderate temperatures (600–700 °C). In this study, we show that the structure of the bimetallic nanoparticles on Pt–Bi/ZSM-5 catalyst is similar to Pt–Bi/SiO 2 . EXAFS indicates the formation of Pt-rich bimetallic Pt–Bi nanoparticles with Pt–Bi bond distance of 2.80 Å. The XRD spectra (on SiO 2 ) are consistent with cubic, intermetallic surface Pt 3 Bi phase on a Pt core. The Pt 3 Bi structure is not known in the thermodynamic phase diagram. In all catalysts, only a small fraction of Bi alloys with Pt. At high Bi loadings, excess Bi reduces at high temperature, covering the catalytic surface leading to a loss in activity. At lower Bi loadings with little excess Bi, the Pt 3 Bi surface is effective for non-oxidative coupling of CH 4 (on ZSM-5) and propane dehydrogenation (on SiO 2 ).more » « less
-
Abstract Self‐stabilized, heterometallic pair‐sites can enable fine‐tuning of catalytic functionality while also mitigating dynamic structural changes that degrade catalytic performance. This study demonstrates the development and characterization of trimetallic PtxCrxAg1‐2x(x≤ 0.1) alloys with active Pt–Cr pair‐ensembles for non‐oxidative ethanol dehydrogenation, leveraging predictions that favorable bonding stabilizes Pt–Cr pairs diluted in Ag. Operando X‐ray absorption spectroscopy confirms the preferential formation and stability of Pt–Cr pairings dispersed throughout the Ag matrix, and ambient‐pressure X‐ray photoelectron spectroscopy shows that Pt–Cr sites have significant activity for ethanol dehydrogenation, while suppressing reaction processes that deactivate binary Pt–Ag and Cr–Ag alloys. This work demonstrates that stabilizing heterometallic pair sites within trimetallic alloys provides a new avenue for designing catalysts with discrete active sites that are durable and highly selective.more » « less
-
Abstract Na2WO4/SiO2, a material known to catalyze alkane selective oxidation including the oxidative coupling of methane (OCM), is demonstrated to catalyze selective hydrogen combustion (SHC) with >97 % selectivity in mixtures with several hydrocarbons (CH4, C2H6, C2H4, C3H6, C6H6) in the presence of gas‐phase dioxygen at 883–983 K. Hydrogen combustion rates exhibit a near‐first‐order dependence on H2partial pressure and are zero‐order in H2O and O2partial pressures. Mechanistic studies at 923 K using isotopically‐labeled reagents demonstrate the kinetic relevance of H−H dissociation and absence of O‐atom recombination. In situ X‐ray diffraction (XRD) and W LIII‐edge X‐ray absorption spectroscopy (XAS) studies demonstrate, respectively, a loss of Na2WO4crystallinity and lack of second‐shell coordination with respect to W6+cations below 923 K; benchmark experiments show that alkali cations must be present for the material to be selective for hydrogen combustion, but that materials containing Na alone have much lower combustion rates (per gram Na) than those containing Na and W. These data suggest a synergy between Na and W in a disordered phase at temperatures below the bulk melting point of Na2WO4(971 K) during SHC catalysis. The Na2WO4/SiO2SHC catalyst maintains stable combustion rates at temperatures ca. 100 K higher than redox‐active SHC catalysts and could potentially enable enhanced olefin yields in tandem operation of reactors combining alkane dehydrogenation with SHC processes.more » « less
An official website of the United States government

