skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


  • NSF Public Access
  • Search Results
  • Hydrous cobalt–iridium oxide two-dimensional nanoframes: insights into activity and stability of bimetallic acidic oxygen evolution electrocatalysts
Title: Hydrous cobalt–iridium oxide two-dimensional nanoframes: insights into activity and stability of bimetallic acidic oxygen evolution electrocatalysts
Acidic oxygen evolution reaction (OER) electrocatalysts that have high activity, extended durability, and lower costs are needed to further the development and wide-scale adoption of proton-exchange membrane electrolyzers. In this work, we report hydrous cobalt–iridium oxide two-dimensional (2D) nanoframes exhibit higher oxygen evolution activity and similar stability compared with commercial IrO 2 ; however, the bimetallic Co–Ir catalyst undergoes a significantly different degradation process compared with the monometallic IrO 2 catalyst. The bimetallic Co–Ir 2D nanoframes consist of interconnected Co–Ir alloy domains within an unsupported, carbon-free, porous nanostructure that allows three-dimensional molecular access to the catalytically active surface sites. After electrochemical conditioning within the OER potential range, the predominately bimetallic alloy surface transforms to an oxide/hydroxide surface. Oxygen evolution activities determined using a rotating disk electrode configuration show that the hydrous Co–Ir oxide nanoframes provide 17 times higher OER mass activity and 18 times higher specific activity compared to commercial IrO 2 . The higher OER activities of the hydrous Co–Ir nanoframes are attributed to the presence of highly active surface iridium hydroxide groups. The accelerated durability testing of IrO 2 resulted in lowering of the specific activity and partial dissolution of Ir. In contrast, the durability testing of hydrous Co–Ir oxide nanoframes resulted in the combination of a higher Ir dissolution rate, an increase in the relative contribution of surface iridium hydroxide groups and an increase in specific activity. The understanding of the differences in degradation processes between bimetallic and monometallic catalysts furthers our ability to design high activity and stability acidic OER electrocatalysts.  more » « less
Award ID(s):
1757843 1936458
PAR ID:
10218311
Author(s) / Creator(s):
; ; ; ; ; ;
Date Published:
Journal Name:
Nanoscale Advances
ISSN:
2516-0230
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; ; ; ; ; et al (, Journal of Materials Chemistry A)
    null (Ed.)
    Iridium oxide (IrO 2 ) is one of the best known electrocatalysts for the oxygen evolution reaction (OER) taking place in a strongly acidic solution. IrO 2 nanocatalysts with high activity as well as long-term catalytic stability, particularly at high current densities, are highly desirable for proton exchange membrane water electrolysis (PEM-WE). Here, we report a simple and cost-effective strategy for depositing ultrafine oxygen-defective IrO x nanoclusters (1–2 nm) on a high-surface-area, acid-stable titanium current collector (H-Ti@IrO x ), through a repeated impregnation–annealing process. The high catalytically active surface area resulting from the small size of IrO x and the preferable electronic structure originating from the presence of oxygen defects enable the outstanding OER performance of H-Ti@IrO x , with low overpotentials of 277 and 336 mV to deliver 10 and 200 mA cm −2 in 0.5 M H 2 SO 4 . Moreover, H-Ti@IrO x also shows an intrinsic specific activity of 0.04 mA cm catalyst −2 and superior mass activity of 1500 A g Ir −1 at an overpotential of 350 mV. Comprehensive experimental studies and density functional theory calculations confirm the important role of oxygen defects in the enhanced OER performance. Remarkably, H-Ti@IrO x can continuously catalyze the OER in 0.5 M H 2 SO 4 at 200 mA cm −2 for 130 hours with minimal degradation, and with a higher IrO x loading, it can sustain at such a high current density for over 500 hours without significant performance decay, holding substantial promise for use in PEM-WE. 
    more » « less
  2. ; ; ; (, Chemistry of Materials)
    This paper presents a study of designing phase-specific and -mixed Ir−Ru−Mn trimetallic electrocatalysts with enhanced performance. By changing the content of Ru, the alloy electrocatalyst evolved from a face-centered tetragonal (fct) phase to a mixture of fct and hexagonal close-packed (hcp) phases and finally to the hcp phase. Among these trimetallic systems, the hcp-phase Ir0.23Ru0.20Mn0.57 electrocatalyst (Ru/Ir = 0.47:0.53) delivered the best performance toward the oxygen evolution reaction (OER), achieving an overpotential of 226 mV at 10 mA cm−2 and a Tafel slope of ∼46.8 mV dec−1. Interestingly, this low-Ir hcp-phase catalyst maintained stable operation for >57 h at a current density of 100 mA cm−2 in 0.1 M HClO4, whereas the Ir-rich fct-phase counterpart (Ir0.35Ru0.07Mn0.58) degraded within 22 h under identical conditions. Potentiodynamic polarization curve study indicated that oxidative dissolution is the dominant degradation pathway, and the structural characterizations indicated that the hcp-phase alloy remained intact, while rutile-type IrRuMnOx oxide was formed for the fct-phase alloy electrocatalyst. These results underscore the effect of the crystal phase on OER durability of the electrocatalyst and point to a design strategy for improving the durability of OER electrocatalysts without increasing the Ir content. 
    more » « less
  3. ; ; (, ChemCatChem)
    Abstract Based on the coincident onsets of oxygen evolution reaction (OER) and metal dissolution for many metal‐oxide catalysts it was suggested that OER triggers dissolution. It is believed that both processes share common intermediates, yet exact mechanistic details remain largely unknown. For example, there is still no clear understanding as to why rutile IrO2exhibits such an exquisite stability among water‐splitting electrocatalysts. Here, we employ density functional theory calculations to analyze interactions between water and the (110) surface of rutile RuO2and IrO2as a response to oxygen evolution involving lattice oxygen species. We observe that these oxides display qualitatively different interfacial behavior that should have important implications for their electrochemical stability. Specifically, it is found that IrO2(110) becomes further stabilized under OER conditions due to the tendency to form highly stable low oxidation state Ir(III) species. In contrast, Ru species at RuO2(110) are prone to facile reoxidation by solution water. This should facilitate the formation of high Ru oxidation state intermediates (>IV) accelerating surface restructuring and metal dissolution. 
    more » « less
  4. ; ; ; (, Crystals)
    Acidic oxygen evolution reaction (OER) electrocatalysts that provide high activity, lower costs, and long-term stability are needed for the wide-scale adoption of proton-exchange membrane (PEM) water electrolyzers for generating hydrogen through electrochemical water splitting. We report the effects of chromium substitution and temperature treatments on the structure, OER activity, and electrochemical stability of ruthenium oxide (RuO2) aerogel OER electrocatalysts. RuO2 and Cr-substituted RuO2 aerogels (Ru0.6Cr0.4O2) were synthesized using sol–gel chemistry and then thermally treated at different temperatures. Introducing chromium into the synthesis increased the surface area (7–11 times higher) and pore volume (5–6 times higher) relative to RuO2 aerogels. X-ray diffraction analysis is consistent with s that Cr was substituted into the rutile RuO2 structure. X-ray photoelectron spectroscopy showed that trivalent Cr substitution altered the surface electronic structure and ratio of surface hydroxides. The specific capacitance values of Cr-substituted RuO2 aerogels were consistent with charge storage within a hydrous surface. Cr-substituted RuO2 aerogels exhibited 26 times the OER mass activity and 3.5 times the OER specific activity of RuO2 aerogels. Electrochemical stability tests show that Cr-substituted RuO2 aerogels exhibit similar stability to commercial RuO2. Understanding how metal substituents can be used to alter OER activity and stability furthers our ability to obtain highly active, durable, and lower-cost OER electrocatalysts for PEM electrolyzers. 
    more » « less
  5. ; ; ; ; ; ; ; (, Advanced Energy Materials)
    Abstract An improved understanding of catalyst dynamics for the oxygen evolution reaction (OER) in acid is critical for informing the development of highly efficient, stable, and cost‐effective OER catalysts for proton exchange membrane water electrolysis applications. Herein highly tunable, active, and dynamic Ir 5+ materials are studied, Ln3IrO7(Ln = Pr, Nd, Sm, and Eu). Leveraging a combination of in situ and ex situ characterization, as well as an advanced mercury underpotential deposition technique for Ir surface site quantification, the dynamic nature of Ln3IrO7materials throughout electrochemical activation under OER conditions is characterized. The trends are elucidated between intrinsic OER activity, surface Ir site quantity, and metal site dissolution behavior as tuned by the Ln site's atomic number. A critical relationship is uncovered to show that maintenance of excellent OER activity throughout performance testing is correlated with a catalysts’ ability to preserve a high degree of Ir enrichment, where heightened stability of Ir sites interestingly parallels reduced stability of Ln sites throughout testing. It is found that as the Ln site's atomic number is decreased, the materials’ intrinsic OER performance improves, due to an increased thermodynamic driving force for Ln dissolution, which is hypothesized to enable the maintenance of highly active Ir‐based surface motifs. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email