An official website of the United States government
Acoustic patterning of micro-particles has many important biomedical applications. However, fabrication of such microdevices is costly and labor-intensive. Among conventional fabrication methods, photo-lithography provides high resolution but is expensive and time consuming, and not ideal for rapid prototyping and testing for academic applications. In this work, we demonstrate a highly efficient method for rapid prototyping of acoustic patterning devices using laser manufacturing. With this method we can fabricate a newly designed functional acoustic device in 4 hours. The acoustic devices fabricated using this method can achieve sub-wavelength, complex and non-periodic patterning of microparticles and biological objects with a spatial resolution of 60 μm across a large active manipulation area of 10 × 10 mm 2 .
more »
« less
High-volume rapid prototyping technique for terahertz metallic metasurfaces
Terahertz technology has greatly benefited from the recent development and generalization of prototyping technologies such as 3D printing and laser machining. These techniques can be used to rapidly fabricate optical devices for applications in sensing, imaging and communications. In this paper, we introduce hot stamping, a simple inexpensive and rapid technique to form 2D metallic patterns that are suitable for many terahertz devices. We fabricate several example devices to illustrate the versatility of the technique, including metasurfaces made of arrays of split-ring resonators with resonances up to 550 GHz. We also fabricate a wire-grid polarizer for use as a polarizing beam splitter. The simplicity and low cost of this technique can help in rapid prototyping and realization of future terahertz devices.
more »
« less
- PAR ID:
- 10222926
- Publisher / Repository:
- Optical Society of America
- Date Published:
- Journal Name:
- Optics Express
- Volume:
- 29
- Issue:
- 9
- ISSN:
- 1094-4087; OPEXFF
- Format(s):
- Medium: X Size: Article No. 13806
- Size(s):
- Article No. 13806
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Considerable recent research interest has focused on the possibility of using metasurfaces for manipulation of terahertz wavefronts. For example, metasurfaces allow a beam to be targeted in any desired direction using strategically placed meta-elements. With rapid prototyping techniques, metasurfaces can be fabricated quickly and at a low cost. These techniques also permit the fabrication of metasurfaces on flexible substrates which can be bent easily. This opens the possibility of employing such devices as conformable arrays on non-flat surfaces. To explore this idea, we experimentally and numerically analyze the performance of a terahertz metasurface printed on paper, as a function of its radius of curvature. We observe that when the metasurface is bent, the direction of the refracted beam is minimally impacted and the performance of the metasurface remains very similar to when it is flat. This conclusion will simplify the design and modeling criteria for conformable metasurfaces.more » « less
-
Photonic integrated circuits (PICs) with rapid prototyping and reprogramming capabilities promise revolutionary impacts on a plethora of photonic technologies. We report direct-write and rewritable photonic circuits on a low-loss phase-change material (PCM) thin film. Complete end-to-end PICs are directly laser-written in one step without additional fabrication processes, and any part of the circuit can be erased and rewritten, facilitating rapid design modification. We demonstrate the versatility of this technique for diverse applications, including an optical interconnect fabric for reconfigurable networking, a photonic crossbar array for optical computing, and a tunable optical filter for optical signal processing. By combining the programmability of the direct laser writing technique with PCM, our technique unlocks opportunities for programmable photonic networking, computing, and signal processing. Moreover, the rewritable photonic circuits enable rapid prototyping and testing in a convenient and cost-efficient manner, eliminate the need for nanofabrication facilities, and thus promote the proliferation of photonics research and education to a broader community.more » « less
-
Abstract Microfluidic devices have found extensive applications in mechanical, biomedical, chemical, and materials research. However, the high initial cost, low resolution, inferior feature fidelity, poor repeatability, rough surface finish, and long turn-around time of traditional prototyping methods limit their wider adoption. In this study, a strategic approach to a deterministic fabrication process based on in-situ image analysis and intermittent flow control called image-guided in-situ maskless lithography (IGIs-ML), has been proposed to overcome these challenges. By using dynamic image analysis and integrated flow control, IGIs-ML provides superior repeatability and fidelity of densely packed features across a large area and multiple devices. This general and robust approach enables the fabrication of a wide variety of microfluidic devices and resolves critical proximity effect and size limitations in rapid prototyping. The affordability and reliability of IGIs-ML make it a powerful tool for exploring the design space beyond the capabilities of traditional rapid prototyping.more » « less
-
Abstract Terahertz waves spanning over the 0.1 to 10 THz region of the electromagnetic spectrum have attracted significant attention owing to a variety of potential applications such as short‐range high‐speed data transmission, noninvasive screening and detection, materials characterization, spectroscopy, etc. This has resulted in massive strides in the development of essential system components such as broadband terahertz sources, detector arrays with high responsivity, as well as modulators. In parallel to this, spurred by the isolation of graphene in 2004, a tremendous interest in 2D systems has led to the rapid exploration and development of a library of atomically thin materials. These can exhibit a myriad of electrical and optical functionalities stemming from semiconducting, insulating, semi‐metallic, or superconducting behavior. In this context, since the early 2010s, 2D materials have been actively explored for active control of terahertz electromagnetic radiation. This paper aims to provide a concise overview of the pioneering efforts as well as the latest progress in these two overlapping research areas. In particular, the discussion is focused on the application of graphene and transition metal dichalcogenides in optically and electrically actuated terahertz amplitude and phase modulators. Furthermore, it provides an outlook on the technological prospects and challenges in these devices.more » « less
