skip to main content


Title: Modeling of Resistive Forces and Buckling Behavior in Variable Recruitment Fluidic Artificial Muscle Bundles
Fluidic artificial muscles (FAMs), also known as McKibben actuators, are a class of fiber-reinforced soft actuators that can be pneumatically or hydraulically pressurized to produce muscle-like contraction and force generation. When multiple FAMs are bundled together in parallel and selectively pressurized, they can act as a multi-chambered actuator with bioinspired variable recruitment capability. The variable recruitment bundle consists of motor units (MUs)—groups of one of more FAMs—that are independently pressurized depending on the force demand, similar to how groups of muscle fibers are sequentially recruited in biological muscles. As the active FAMs contract, the inactive/low-pressure units are compressed, causing them to buckle outward, which increases the spatial envelope of the actuator. Additionally, a FAM compressed past its individual free strain applies a force that opposes the overall force output of active FAMs. In this paper, we propose a model to quantify this resistive force observed in inactive and low-pressure FAMs and study its implications on the performance of a variable recruitment bundle. The resistive force behavior is divided into post-buckling and post-collapse regions and a piecewise model is devised. An empirically-based correction method is proposed to improve the model to fit experimental data. Analysis of a bundle with resistive effects reveals a phenomenon, unique to variable recruitment bundles, defined as free strain gradient reversal.  more » « less
Award ID(s):
1845203
NSF-PAR ID:
10223686
Author(s) / Creator(s):
; ;
Date Published:
Journal Name:
Actuators
Volume:
10
Issue:
3
ISSN:
2076-0825
Page Range / eLocation ID:
42
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. This paper investigates the effect of resistive forces within a variable recruitment (VR) bundle actuators during recruitment state transition. Due to their versatility in design, ease of manufacturing, high force-to-weight ratio, and inherent compliance, FAMs have become a favorable actuation method for the robotics research community. Recently, researchers have adapted mammalian muscle topology to construct a multi-chamber FAM bundle actuator, consisting of separate units of actuation called motor units (MUs). These bundle actuators have VR functionality in which one or more MUs are sequentially activated according to the load demand. This activation scheme has been shown to have higher actuator efficiencies as compared to a single equivalent cross-sectional area FAM actuator. A characteristic behavior of VR bundles is the interaction between FAM elements in the bundle. Distinctively during recruitment state transition, inactive/low-pressure FAMs buckle outward and are compressed past its free strain due to the higher strain of fully active FAMs. There exists an onset pressure above which such FAMs need to contribute positively to the overall force output of the bundle. This paper presents a realistic scenario in which MU pressure is controlled by a hydraulic servo valve. As a result, the overall bundle force exhibits a sharp decrease during recruitment state transition while the MU being recruited is below the onset pressure. 
    more » « less
  2. Lakhtakia, Akhlesh ; Martín-Palma, Raúl J. ; Knez, Mato (Ed.)
    This paper investigates the effect of resistive forces that arise in compressed fluidic artificial muscles (FAMs) within a variable recruitment bundle. Much like our skeletal muscle organs that selectively recruit different number of motor fibers depending on the load demand, a variable recruitment FAM bundle adaptively activates the minimum number of motor units (MUs) to increase its overall efficiency. A variable recruitment bundle may operate in different recruitment states (RSs) during which only a subset of the FAMs within a bundle are activated. In such cases, a difference in strain occurs between active FAMs and inactive/low-pressure FAMs. This strain difference results in the compression of inactive/lowpressure FAMs causing them to exert a resistive force opposing the force output of active FAMs. This paper presents experimental measurements for a FAM for both tensile and compressive regions. The data is used to simulate the overall force-strain space of a variable recruitment bundle for when resistive force effects are neglected and when they are included. Counterintuitively, an initial decrease in bundle free strain is observed when a transition to a higher RS is made due to the presence of resistive forces. We call this phenomenon the free strain gradient reversal of a variable recruitment bundle. The paper is concluded with a discussion of the implications of this phenomenon. 
    more » « less
  3. This paper experimentally investigates the mechanical behavior of inactive and low-pressure fluidic artificial muscle (FAM) actuators under applied axial load. In most cases, the active characteristics of an actuator are of interest because they provide valuable information about its force-strain relationship. However, a system of actuators requires attention to the interaction between individual units. One such configuration is a bundle of McKibben artificial muscle actuators arranged in parallel and used for load-adaptive variable recruitment. This bio-inspired actuator bundle sequentially increases the number of actuators activated depending on the load required, which is analogous to how motor units are recruited in a mammalian muscle tissue. While using the minimum number of actuators allows the bundle to operate efficiently, the resistive force of inactive elements acts against total bundle contraction due to their inherent stiffness. In addition, when the bundle transitions between recruitment levels, motor units for a given recruitment level may be gradually pressurized; these low-pressure motor units can also cause resistive forces. Experiments were conducted to characterize the complex interaction between the bladder and braided mesh that cause the resistive force and deflection of inactive and low-pressure elements. Based on observations made from experiments, the paper proposes the initial criteria for developing a model of the resistive forces of a McKibben actuator, both individually, and within the context of a variable recruitment bundle. 
    more » « less
  4. Abstract Fluidic artificial muscles (FAMs) are a popular actuation choice due to their compliant nature and high force-to-weight ratio. Variable recruitment is a bio-inspired actuation strategy in which multiple FAMs are combined into motor units that can be pressurized sequentially according to load demand. In a traditional ‘fixed-end’ variable recruitment FAM bundle, inactive units and activated units that are past free strain will compress and buckle outward, resulting in resistive forces that reduce overall bundle force output, increase spatial envelope, and reduce operational life. This paper investigates the use of inextensible tendons as a mitigation strategy for preventing resistive forces and outward buckling of inactive and submaximally activated motor units in a variable recruitment FAM bundle. A traditional analytical fixed-end variable recruitment FAM bundle model is modified to account for tendons, and the force–strain spaces of the two configurations are compared while keeping the overall bundle length constant. Actuation efficiency for the two configurations is compared for two different cases: one case in which the radii of all FAMs within the bundle are equivalent, and one case in which the bundles are sized to consume the same amount of working fluid volume at maximum contraction. Efficiency benefits can be found for either configuration for different locations within their shared force–strain space, so depending on the loading requirements, one configuration may be more efficient than the other. Additionally, a study is performed to quantify the increase in spatial envelope caused by the outward buckling of inactive or low-pressure motor units. It was found that at full activation of recruitment states 1, 2, and 3, the tendoned configuration has a significantly higher volumetric energy density than the fixed-end configuration, indicating that the tendoned configuration has more actuation potential for a given spatial envelope. Overall, the results show that using a resistive force mitigation strategy such as tendons can completely eliminate resistive forces, increase volumetric energy density, and increase system efficiency for certain loading cases. Thus, there is a compelling case to be made for the use of tendoned FAMs in variable recruitment bundles. 
    more » « less
  5. Abstract Biological musculature employs variable recruitment of muscle fibers from smaller to larger units as the load increases. This orderly recruitment strategy has certain physiological advantages like minimizing fatigue and providing finer motor control. Recently fluidic artificial muscles (FAM) are gaining popularity as actuators due to their increased efficiency by employing bio-inspired recruitment strategies such as active variable recruitment (AVR). AVR systems use a multi-valve system (MVS) configuration to selectively recruit individual FAMs depending on the load. However, when using an MVS configuration, an increase in the number of motor units in a bundle corresponds to an increase in the number of valves in the system. This introduces greater complexity and weight. The objective of this paper is to propose, analyze, and demonstrate an orderly recruitment valve (ORV) concept that enables orderly recruitment of multiple FAMs in the system using a single valve. A mathematical model of an ORV-controlled FAM bundle is presented and validated by experiments performed on a proof-of-concept ORV experiment. The modeling is extended to explore a case study of a 1-DOF robot arm system consisting of an electrohydraulic pressurization system, ORV, and a FAM-actuated rotating arm plant and its dynamics are simulated to further demonstrate the capabilities of an ORV-controlled closed-loop system. An orderly recruitment strategy was implemented through a model-based feed forward controller. To benchmark the performance of the ORV, a conventional MVS with equivalent dynamics and controller was also implemented. Trajectory tracking simulations on both the systems revealed lower tracking error for the ORV controlled system compared to the MVS controlled system due to the unique cross-flow effects present in the ORV. However, the MVS, due to its independent and multiple valve setup, proved to be more adaptable for performance. For example, modifications to the recruitment thresholds of the MVS demonstrated improvement in tracking error, albeit with a sacrifice in efficiency. In the ORV, tracking performance remained insensitive to any variation in recruitment threshold. The results show that compared to the MVS, the ORV offers a simpler and more compact valving architecture at the expense of moderate losses in control flexibility and performance. 
    more » « less