skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.


Title: Formation of Chromitite Seams and Associated Anorthosites in Layered Intrusion by Reactive Volatile-rich Fluid Infiltration
Abstract Drilling related to development of the platinum-group element deposit of the J-M Reef of the Stillwater Complex returned samples of a rare chromitite seam between anorthosite and norite in a discordant anorthositic body. Plagioclase core An concentrations are marginally higher and modestly reversely zoned on the norite side (average Ancore = 83·8; average Ancore – Anrim = –1·1) as compared with the anorthosite side (average Ancore 82·5; average Ancore – Anrim = +1·0). The anorthosites are also characterized by a slightly smaller average plagioclase grain size than plagioclase in the norite (1·41 mm and 1·54 mm, respectively). The chromite can contain single and polyphase inclusions of orthopyroxene, plagioclase, amphibole, biotite and Cl-rich apatite. These and other compositional and textural features, as well as inference from other discordant anorthositic bodies in the Banded series, are all consistent with a chromatographic model of chromite precipitation at a reaction front as a norite protolith reacts with a Cl-rich aqueous fluid saturated in plagioclase alone. Chromitite seam formation is modeled using an infiltration metasomatic model, in which a fluid becomes progressively undersaturated in pyroxene as it rises into the hotter part of the crystal pile. As this pyroxene-undersaturated fluid moves through a noritic protolith, it dissolves the Cr-bearing orthopyroxene to produce an anorthosite. Chromite precipitates at the reaction front between the anorthosite and the norite owing to liberation of Mg and Cr from pyroxene. Continuous redissolution and reprecipitation of chromite occurs as the pyroxene dissolution front moves in the direction of fluid flow, collecting the Cr lost from the anorthosite. Owing to Cr dissolved mainly as a neutral divalent cation complex, CrCl(OH)0, in the solution, but incorporated as a trivalent cation in chromite, the required redox reaction can involve concurrent precipitation of sulfide with chromite. This mechanism differs from some recent models in that the anorthosites are themselves replacement bodies and are not original precipitates from a magma nor formed by loss of mafic material by partial melting. The results show the need for experimental mineral solubility data at T and P conditions appropriate to upper crustal mafic–ultramafic intrusions.  more » « less
Award ID(s):
1647727
PAR ID:
10225482
Author(s) / Creator(s):
; ;
Date Published:
Journal Name:
Journal of Petrology
Volume:
62
Issue:
2
ISSN:
0022-3530
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. High-Sr/Y granitoids in continental settings are sometimes erroneously regarded as the products derived from partial melting of thickened/delaminated mafic lower curst under relatively higher pressures (1.5 GPa) in a collisional orogenic setting. In fact, multiple magmatic processes in the trans-crustal magma system, such as recycling of antecrysts, crustal assimilation, and fractional crystallization, can create or modify the primary “adakitic” signature. As a result, the generation of adakitic magmas in continental settings remains controversial from a bulk-rock perspective. Here, we address the origin of adakitic plutonic rocks through geochemical and textural characterization of rock-forming minerals in the pyroxene-bearing Zhuyuan granodiorite, West Qinling, China. The Zhuyuan granodiorite formed in a post-collisional setting and primarily consists of resorbed orthopyroxene, three types of clinopyroxene, amphibole, two types of plagioclases, K-feldspar, biotite, and quartz. Type-1 Cpx has high XMg (70.0–81.7). Type-2 Cpx displays normal zoning and decreasing XMg (80.9 to 71.5) from the core to rim. Type-3 Cpx is reversely zoned, where the rims have higher XMg (75.5–86.9), Ni, Cr, suggesting a recharge event. Orthopyroxene has high-Ni and -Cr contents, as well as high XMg (80.9–82.8), indicative of antecrysts that grew in mafic magma reservoirs. The injection of magmas from different sources is supported by sieve-textured plagioclase and crystal size distributions of non-poikilitic amphibole. Finally, non-sieve textured plagioclase, biotite, K-feldspar, and quartz are late-crystallized phases, indicative of an orthocrystic origin. The melts in equilibrium with these orthocrysts display significantly higher Sr/Y values than the magma batches that crystallized other mafic phases (i.e., amphibole, clinopyroxene, and orthopyroxene). Thus, we propose that the system involved an initial high-Sr/Y melts in equilibrium with the orthocryst assemblage was generated by water-fluxed melting of intermediate to felsic sources. The addition of low Sr/Y non-orthocrysts (e.g., amphibole and pyroxene) and associated melt diluted the original “adakitic signal” in the magma reservoir and drove the bulk composition to more mafic values. Consequently, the Zhuyuan pyroxene-bearing granodiorite represents a mixture of crystals with diverse origins and distinct magma batches of various compositions (from felsic to mafic compositions). Our study emphasizes that the origin of adakitic granitoids cannot be clearly deciphered without geochemical analysis of the constituent minerals. We also suggest that Sr/Y values in plutons should be cautiously used in paleo-crustal thickness estimates in collisional settings because of possible open system scenarios as described here. 
    more » « less
  2. Loveringite, a rare member of the crichtonite group with nominal formula (Ca,Ce)(Ti,Fe,Cr,Mg)21O38, was found in the Khamal layered mafic intrusion, the first known locality for this mineral in the Arabian Shield. The Khamal intrusion, a large post-collisional mafic complex, is lithologically zoned, bottom to top, from olivine gabbro through gabbronorite, hornblende gabbro, anorthosite, and diorite to quartz diorite. Loveringite is found near the base of the complex, as an intercumulus phase in olivine gabbro. Most loveringite grains are homogeneous, although a few grains are zoned from cores rich in TiO2, Al2O3, Cr2O3, and CaO towards rims rich in FeO*, ZrO2, V2O3, Y2O3, and rare earth elements (REE). Petrographic relations indicate that loveringite formed after crystallization of cumulus olivine, pyroxenes, and plagioclase. Anhedral and corroded crystals of loveringite are surrounded by reaction rims of Mn-bearing ilmenite and baddeleyite, suggesting that the residual liquid evolved into and subsequently out of the stability field of loveringite. The budget of incompatible elements (Zr, Hf, REE, U, and Th) hosted in loveringite is anomalous for a primitive mafic liquid. Saturation in loveringite is likely the result of early contamination of the primary melt by anatexis of country rock, followed by isolation of evolving liquid in intercumulus space that restricted communication with the overlying magma chamber. The zoned crystals likely reflect diffusive equilibration between residual loveringite grains and their reaction rims of ilmenite. 
    more » « less
  3. Massif-type anorthosites, enormous and enigmatic plagioclase-rich cumulate intrusions emplaced into Earth’s crust, formed in large numbers only between 1 and 2 billion years ago. Conflicting hypotheses for massif-type anorthosite formation, including melting of upwelling mantle, lower crustal melting, and arc magmatism above subduction zones, have stymied consensus on what parental magmas crystallized the anorthosites and why the rocks are temporally restricted. Using B, O, Nd, and Sr isotope analyses, bulk chemistry, and petrogenetic modeling, we demonstrate that the magmas parental to the Marcy and Morin anorthosites, classic examples from North America’s Grenville orogen, require large input from mafic melts derived from slab-top altered oceanic crust. The anorthosites also record B isotopic signatures corresponding to other slab lithologies such as subducted abyssal serpentinite. We propose that anorthosite massifs formed underneath convergent continental margins wherein a subducted or subducting slab melted extensively and link massif-type anorthosite formation to Earth’s thermal and tectonic evolution. 
    more » « less
  4. Abstract Atomic‐scale engineering of chromite spinels featuring redox‐active tetrahedral A‐sites and strong Cr–O covalency offers a promising route to superior platinum‐group‐metal‐free oxygen evolution reaction (OER) catalysts. However, comprehensive studies addressing how cation substitution influences surface chemistry and governs OER activity and durability in chromite spinels remain limited. Here, a systematic investigation of the multicationic chromite series NixFeyCr3−x−yO4is presented, identifying composition‐dependent Lewis acidity as a descriptor of superior OER performance. It is further demonstrated that tuning surface acidity directly controls dynamic reconstruction processes and lattice‐oxygen participation during spinel‐based electrocatalysis. Following activation, the optimized Ni0.8Fe0.3Cr1.9O4catalyst delivers a current density of 10 mA cm−2at an overpotential of 235 mV, surpassing RuO2, with excellent long‐term stability. Integrating microscopic and spectroscopic analysis with operando impedance spectroscopy, it shows that activation generates an oxyhydroxide overlayer and reveals a previously unrecognized link between surface Lewis acidity and the growth kinetics and activity of these shells. Density functional theory calculations indicate that Fe incorporation at octahedral sites raises the O 2p‐band center and lowers oxygen‐vacancy formation energy, promoting lattice‐oxygen activation and triggering reconstruction, yielding enhanced OER. This work integrates cation‐driven surface‐acidity modulation, acidity‐governed reconstruction, and OER activity enhancement into a unified predictive framework for designing earth‐abundant spinel‐based catalysts. 
    more » « less
  5. Abstract Detrital chromites are commonly reported within Archean metasedimentary rocks, but have thus far garnered little attention for use in provenance studies. Systematic variations of Cr–Fe spinel mineral chemistry with changing tectonic setting have resulted in the extensive use of chromite as a petrogenetic indicator, and so detrital chromites represent good candidates to investigate the petrogenesis of eroded Archean mafic and ultramafic crust. Here, we report the compositions of detrital chromites within fuchsitic (Cr-muscovite rich) metasedimentary rocks from the Jack Hills, situated within the Narryer Terrane, Yilgarn Craton, Western Australia, which are geologically renowned for hosting Hadean (>4000 Ma) zircons. We highlight signatures of metamorphism, including highly elevated ZnO and MnO, coupled with lowered Mg# in comparison with magmatic chromites, development of pitted domains, and replacement of primary inclusions by phases that are part of the metamorphic assemblages within host metasedimentary rocks. Oxygen isotope compositions of detrital chromites record variable exchange with host metasedimentary rocks. The variability of metamorphic signatures between chromites sampled only meters apart further indicates that modification occurred in situ by interaction of detrital chromites with metamorphic fluids and secondary mineral assemblages. Alteration probably occurred during upper greenschist to lower amphibolite facies metamorphism and deformation of host metasedimentary rocks at ∼2650 Ma. Regardless of metamorphic signatures, sampling location or grain shape, chromite cores yield a consistent range in Cr#. Although other key petrogenetic indices, such as Fe2O3 and TiO2 contents, are complicated in Jack Hills chromites by mineral non-stoichiometry and secondary mobility within metasedimentary rocks, we demonstrate that the Cr# of chromite yields significant insights into their provenance. Importantly, moderate Cr# (typically 55–70) precludes a komatiitic origin for the bulk of chromites, reflecting a dearth of komatiites and intrusive equivalents within the erosional catchment of the Jack Hills metasedimentary units. We suggest that the Cr# of Jack Hills chromite fits well with chromites derived from layered intrusions, and that a single layered intrusion may account for the observed chemical compositions of Jack Hills detrital chromites. Where detailed characterization of key metamorphic signatures is undertaken, detrital chromites preserved within Archean metasedimentary rocks may therefore yield valuable information on the petrogenesis and geodynamic setting of poorly preserved mafic and ultramafic crust. 
    more » « less