- Award ID(s):
- 1751926
- NSF-PAR ID:
- 10225581
- Date Published:
- Journal Name:
- Water resources research
- Volume:
- 56
- Issue:
- 9
- ISSN:
- 1944-7973
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
We explore how rock properties and channel morphology vary with rock type in Last Chance Canyon, Guadalupe Mountains, New Mexico, USA. The rocks here are composed of horizontally to near-horizontally interbedded carbonate and sandstone. This study focuses on first- and second-order channel sections, where the streams have a lower channel steepness index (ksn) upstream and transition to higher ksn values downstream. We hypothesize that differences in bed thickness and rock strength influence ksn values, both locally by influencing bulk bedrock strength and also nonlocally through the production of coarse sediment. We collected discontinuity intensity data (the length of bedding planes and fractures per unit area), Schmidt hammer rebound measurements, and measured the largest boulder at every 12.2 m elevation contour to test this hypothesis. Bedrock and boulder mineralogy were determined using a lab-based carbonate dissolution method. High-resolution orthomosaics and digital surface models (DSMs) were generated from drone and ground-based photogrammetry. The orthomosaics were used to map channel sections with exposed bedrock. The United States Geological Survey (USGS) 10 m digital elevation models (DEMs) were used to measure channel slope and hillslope relief. We find that discontinuity intensity is negatively correlated with Schmidt hammer rebound values in sandstone bedrock. Channel steepness tends to be higher where reaches are primarily incising through more thickly bedded carbonate bedrock and lower where more thinly bedded sandstone is exposed. Bedrock properties also influence channel morphology indirectly, through coarse sediment input from adjacent hillslopes. Thickly bedded rock layers on hillslopes erode to contribute larger colluvial sediment to adjacent channels, and these reaches have higher ksn values. Larger and more competent carbonate sediment armors both the carbonate and the more erodible sandstone and reduces steepness contrasts across rock types. We interpret that in the relatively steep, high-level ksn downstream channel sections, the slope is primarily controlled by the coarse alluvial cover. We further posit that the upstream low-level ksn reaches have a base level that is fixed by the steep downstream reaches, resulting in a stable configuration, where channel slopes have adjusted to lithologic differences and/or sediment armor.more » « less
-
Abstract High‐resolution topography reveals that floodplains along meandering rivers in Indiana commonly contain intermittently flowing channel networks. We investigated how the presence of floodplain channels affects lateral surface‐water connectivity between a river and floodplain (specifically exchange flux and timescales of transport) as a function of flow stage in a low‐gradient river‐floodplain system. We constructed a two‐dimensional, surface‐water hydrodynamic model using Hydrologic Engineering Center's River Analysis System (HEC‐RAS) 2D along 32 km of floodplain (56 km along the river) of the East Fork White River near Seymour, Indiana, USA, using lidar elevation data and surveyed river bathymetry. The model was calibrated using land‐cover specific roughness to elevation‐discharge data from a U.S. Geological Survey gage and validated against high‐water marks, an aerial photo showing the spatial extent of floodplain inundation, and measured flow velocities. Using the model results, we analyzed the flow in the river, spatial patterns of inundation, flow pathways, river‐floodplain exchange, and water residence time on the floodplain. Our results highlight that bankfull flow is an oversimplified concept for explaining river‐floodplain connectivity because some stream banks are overtopped and major low‐lying floodplain channels are inundated roughly 19 days per year. As flow increased, inundation of floodplain channels at higher elevations dissected the floodplain, until the floodplain channels became fully inundated. Additionally, we found that river‐floodplain exchange was driven by bank height or channel orientation depending on flow conditions. We propose a conceptual model of river‐floodplain connectivity dynamics and developed metrics to analyze quantitatively complex river‐floodplain systems.
-
Abstract The availability of high‐resolution digital elevation models (DEMs) derived from airborne light detection and ranging (LiDAR) surveys has spurred the development of several methods to identify and map fluvial terraces. The post‐glacial landscape of the Sheepscot River watershed, Maine, where land‐use change has produced fill terraces upstream of historic dam sites, was selected to implement a comparison between terrace mapping methodologies. At four study sites within the watershed, terraces were manually mapped on LiDAR‐DEM‐derived hillshade images to facilitate the comparison among fully and semi‐automated DEM‐based procedures, including: (1) spatial relationships between interpreted terraces and surrounding natural topography, (2) feature classification algorithms, and (3) the TerEx terrace mapping toolbox. Each method was evaluated based on its accuracy and ease of implementation. The four study sites have varying longitudinal slope (0.0008–0.006 m/m), channel width (< 5–30 m), surrounding landscape relief (20–80 m), type and density of surrounding land use, and mapped surficial geologic units. All methods generally overestimate terrace areas (average predicted area 210% of manually defined area) with the most accurate results achieved within confined river valleys surrounded by the steep hillslopes. Accuracy generally decreases for study sites surrounded by low‐relief landscapes (predicted areas ranged 4–953% of manual delineations). We conclude with the advantages and drawbacks of each method tested and make recommendations for the scenarios where the use of each method is most appropriate. Copyright © 2016 John Wiley & Sons, Ltd.
-
Abstract Bedrock river width is an essential geometric parameter relevant to understanding flood hazards and gauging station rating curves, and is critical to stream power incision models and many other landscape evolution models. Obtaining bedrock river width measurements, however, typically requires extensive field campaigns that take place in rugged and steep topography where river access is often physically challenging. Although prior work has turned to measuring channel width from satellite imagery, these data present a snapshot in time, are typically limited to rivers ≥ 10–30 m wide due to the image resolution, and are physically restricted to areas devoid of vegetation. For these reasons, we are generally data limited, and the factors impacting bedrock channel width remain poorly understood. Due to these limitations, researchers often turn to assumptions of width‐scaling relationships with drainage area or discharge to estimate bedrock channel width. Here we present a new method of obtaining bedrock channel width at a desired river discharge through the incorporation of a high‐resolution bare‐earth digital elevation model (DEM) using MATLAB Topotoolbox and the HEC‐RAS river analysis system. We validate this method by comparing modeled results to US Geological Survey (USGS) field measurements at existing gauging stations, as well as field channel measurements. We show that this method can capture general characteristics of discharge rating curves and predict field‐measured channel widths within uncertainty. As high‐resolution DEMs become more available across the United States through the USGS three‐dimensional elevation program (3DEP), the future utility of this method is notable. Through developing and validating a streamlined, open‐source, and freely available workflow of channel width extraction, we hope this method can be applied to future research to improve the quantity of channel width measurements and improve our understanding of bedrock channels.
-
Genetic divergence along the central Baja California Peninsula, Mexico, has been hypothesized to reflect a Pliocene cross-peninsular seaway that previously isolated northern and southern populations of terrestrial plants and animals. One way to test this hypothesis is through quantitative analysis of relict channels preserved on low-relief paleo-surfaces. Recognition of tidal channels on relict landscapes offers a powerful tool for reconstructing past sea level in tectonically active arid coastal regions where crustal uplift results in relative sea-level fall and preservation of ancient channel networks. This method requires reliable criteria to distinguish fluvial versus tidal channels, which is challenging due to the overlap of standard metrics for the two channel types, and possible inheritance or overprinting of geometries. We improve the utility of existing metrics and explore the potential for identifying paleo-sea-level indicators by analyzing modern and ancient channels to identify unique patterns in planform geometry and to evaluate their applicability for classifying tidal versus fluvial origins. Preliminary measurements of geographically diverse modern systems reveal distinct, quantifiable differences between the two channel types in along-channel curvature, width, and wavelet spectra. Modern tidal channels display a pronounced and systematic down-channel increase in channel width and decrease in curvature. In contrast, modern fluvial channels do not display spatial patterns in channel width and curvature along their lengths. These patterns provide diagnostic criteria that can be paired with wavelet analysis of meander belts to classify the paleoenvironment of ancient channels based on their planform geometry. We apply this approach to evaluate the origin of channels preserved on relict landscapes in the San Ignacio trough in the central Baja California peninsula, a former low-relief embayment of the Pacific Ocean. Early results reveal the presence of ancient tidal channel networks at elevations of ~ 50-300 m above modern sea level on surfaces that are independently dated to be ca. 4-5 Ma. These findings provide evidence for post 4-Ma uplift in the mid-peninsular region and an ancient tidal environment that may have isolated northern and southern terrestrial populations.more » « less