More Like this

1. Emissive Organic Exciplexes in Water

   https://doi.org/10.1021/acs.joc.9b00718  

   Dinnocenzo, Joseph P.; Mark, Analuz; Farid, Samir (June 2019, The Journal of Organic Chemistry)
2. Metal-organic frameworks for water vapor adsorption

   https://doi.org/10.1016/j.chempr.2023.09.005  

   Shi, Le; Kirlikovali, Kent O; Chen, Zhijie; Farha, Omar K (February 2024, Chem)

   Water is the most abundant and cleanest natural resource on earth, and it is the driving force of all nature. It not only affects food security, human health, and ecosystem integrity and maintenance, but is also an important driver of energy in industrial production and life. Importantly, water adsorption applications are considered to be highly energy-efficient and environmentally friendly technologies,1 including atmospheric water harvesting,2-4 desiccation of clean gases,5 indoor humidity control,6,7 and adsorptive heat transformation.8,9 However, current water adsorption-related applications are still constrained by properties of adsorbents, such as their low water uptake capacities, poor cyclic stabilities, limited feasibilities over a range of humidity conditions, and minimal commercial availabilities. Conventional nanoporous materials (e.g., silica gels, zeolites, and clays) were the first adsorbents used in water capture applications due to their low cost, commercial availability, and favorable water adsorption kinetics. However, these materials generally suffer from either low water uptake capacities or high regeneration temperature, limiting their use in practical water absorption applications.1,10 Metal-organic frameworks (MOFs), a class of crystalline porous materials, are assembled from inorganic nodes and organic linkers through coordination bonds.11,12 Benefiting from their exceptional porosity and surface area, tunable pore size and geometry, and highly tailorable and designable structures and functionalities, MOFs show considerable potential for gas storage and separation, heterogeneous catalysis, and other energy and environmental sustainability applications.13-17 In recent years, MOFs have also shown great potential for water vapor adsorption because of a growing understanding of the relationship between MOFs and water, as well as an increasing number of reports detailing MOFs that exhibit high water stability.1,4,9 Moreover, judicious design of the MOF structures enables control over their water adsorption properties and the water uptake capacities, which make MOFs ideal candidates for water adsorption-related applications. This review aims to provide an overview of recent advances in the development of MOFs for water adsorption, as well as to offer proposed guidelines to develop even better water adsorption materials. First, we briefly introduce the fundamentals of water adsorption, including how to ascertain key insights based on the shapes of water adsorption isotherms, descriptions of various water adsorption mechanisms, and a discussion on the stability of MOFs in water systems. Next, we discuss several recent reports have detailed how to improve water uptake capacity through the design and synthesis of MOFs. In particular, we highlight the importance of reticular chemistry in the designed synthesis of MOF-based water adsorbent materials. We then shift our focus to discussing the enormous potential of MOFs for use in selective water vapor adsorption applications with both theoretical and practical considerations considered. Finally, we offer our thoughts on the future development of this field in three aspects: chemistry and materials design, process engineering, and commercialization of MOFs for water adsorption. We hope that this review will provide fundamental insights for chemists and inspire them to synthesize MOFs with better water adsorption performance; and provide assistance to engineers researching MOF-based water adsorption devices and working towards the development of highly energy-efficient and environmentally friendly technologies with reduced carbon footprints. 

   more » « less
3. Investigating the evolution of water-soluble organic carbon in evaporating cloud water

   https://doi.org/10.1039/d0ea00005a  

   Pratap, Vikram; Christiansen, Amy E.; Carlton, Annmarie G.; Lance, Sara; Casson, Paul; Dukett, Jed; Hassan, Hesham; Schwab, James J.; Hennigan, Christopher J. (January 2021, Environmental Science: Atmospheres)

   null (Ed.)

   Cloud cycling plays a key role in the evolution of atmospheric particles and gases, producing secondary aerosol mass and transforming the optical properties and impacts of aerosols globally. In this study, bulk cloud water samples collected at Whiteface Mountain (Wilmington, NY) in the summer of 2017 were aerosolized, dried to 50% RH, and analyzed for the evaporative loss of water soluble organic carbon (WSOC) and for brown carbon (BrC) formation. Systematic WSOC evaporation occurred in all cloud water samples, while no evidence for drying induced BrC formation was observed. On average, 11% (±3%) of WSOC evaporated when the aerosolized cloud droplets were dried to 50% RH, though this represents a lower bound on the WSOC reversibly partitioned to clouds due to experimental constraints. To our knowledge, this represents the first direct measurements of organic evaporation from actual cloud water undergoing drying. Formate and acetate contributed 19%, on average, to the evaporated WSOC, while no oxalate evaporation occurred. GECKO-A model simulations were carried out to predict the production of WSOC compounds that reversibly partition to cloud water from photooxidation of an array of VOCs. The model results suggest that precursor VOC identity and oxidation regime (VOC:NO x ) have a dramatic effect on the reversible partitioning of WSOC to cloud water and the abundance of aqSOA precursors, though the higher abundance of reversibly partitioned WSOC predicted by the model may be due to aqueous production of low-volatility material in the actual cloud samples. This study underscores the importance of the large fraction of unidentified compounds that contribute to WSOC in cloud water and their aqueous processing. 

   more » « less
4. Selectivity for water isotopologues within metal organic nanotubes

   https://doi.org/10.1039/d1ra00602a  

   Payne, Maurice K.; Applegate, Lindsey C.; Singh, Priyanka; Jayasinghe, Ashini S.; Crull, George B.; Grafton, Andrea B.; Cheatum, Christopher M.; Forbes, Tori Z. (May 2021, RSC Advances)

   null (Ed.)

   Through a combination of many analytical approaches, we show that a metal organic nanotube (UMON) displays selectivity for H 2 O over all types of heavy water (D 2 O, HDO, HTO). Water adsorption experiments combined with vibrational and radiochemical analyses reveal significant differences in uptake and suggest that surface adsorption processes may be a key driver in water uptake for this material. 

   more » « less
5. Water-enhanced CO2 capture in metal–organic frameworks

   https://doi.org/10.3389/fchem.2025.1634637  

   Cammarere, Celine; Cortés, Jaeden; Glover, T Grant; Snurr, Randall Q; Hupp, Joseph T; Liu, Jian (July 2025, Frontiers in Chemistry)

   CO₂capture from post-combustion flue gas originating from coal or natural gas power plants, or even from the ambient atmosphere, is a promising strategy to reduce the atmospheric CO₂concentration and achieve global decarbonization goals. However, the co-existence of water vapor in these sources presents a significant challenge, as water often competes with CO₂for adsorption sites, thereby diminishing the performance of adsorbent materials. Selectively capturing CO₂in the presence of moisture is a key goal, as there is a growing demand for materials capable of selectively adsorbing CO₂under humid conditions. Among these, metal–organic frameworks (MOFs), a class of porous, highly tunable materials, have attracted extensive interest for gas capture, storage, and separation applications. The numerous combinations of secondary building units and organic linkers offer abundant opportunities for designing systems with enhanced CO₂selectivity. Interestingly, some recent studies have demonstrated that interactions between water and CO₂within the confined pore space of MOFs can enhance CO₂uptake, flipping the traditionally detrimental role of moisture into a beneficial one. These findings introduce a new paradigm: water-enhanced CO₂capture in MOFs. In this review, we summarize these recent discoveries, highlighting examples of MOFs that exhibit enhanced CO₂adsorption under humid conditions compared to dry conditions. We discuss the underlying mechanisms, design strategies, and structural features that enable this behavior. Finally, we offer a brief perspective on future directions for MOF development in the context of water-enhanced CO₂capture. 

   more » « less