An official website of the United States government
Abstract Vertically aligned nanocomposite (VAN) thin films offer exceptional physical properties through diverse material combinations, providing a robust platform for designing complex nanocomposites with tailored performance. Considering materials compatibility issues, most of oxide‐metal VANs have focused on noble metals as the secondary phase in the oxide matrix. Here, an oxide‐metal hybrid metamaterials in the VAN form has been designed which combines ferroelectric BaTiO3(BTO) with two immiscible non‐noble metal elements of Co and Cu, resulting in a three‐phase BTO‐Co‐Cu (BTO‐CC) VAN film. This film exhibits a characteristic nanopillar‐in‐matrix nanostructure with three distinct types of nanopillar morphologies, i.e., Co‐rich cylindrical nanopillars, Cu‐Co‐nanolaminated Co rectangular nanopillars and Co‐Cu‐core–shell cylindrical nanopillars. Phase field modeling indicates the constructed structure is resulted from the interplay between thermochemical, chemomechanical, and interfacial energy driving forces. The strong structural anisotropy leads to anisotropic optical and magnetic properties, presenting potential as hyperbolic metamaterial (HMM) with transverse‐positive dispersion in the near‐infrared region. The inclusion of non‐noble Cu nanostructure induces surface plasmon resonance (SPR) in the visible region. Additionally, ferroelectric properties have been demonstrated in a BTO/BTO‐CC bilayer, confirming room‐temperature multiferroicity in the film. The complex three‐phase VANs offer a novel platform for exploring electro‐magneto‐optical coupling along vertical interfaces toward future integrated devices.
more »
« less
Induced ferroelectric phases in SrTiO 3 by a nanocomposite approach
Inducing new phases in thick films via vertical lattice strain is one of the critical advantages of vertically aligned nanocomposites (VANs). In SrTiO 3 (STO), the ground state is ferroelastic, and the ferroelectricity in STO is suppressed by the orthorhombic transition. Here, we explore whether vertical lattice strain in three-dimensional VANs can be used to induce new ferroelectric phases in SrTiO 3 :MgO (STO:MgO) VAN thin films. The STO:MgO system incorporates ordered, vertically aligned MgO nanopillars into a STO film matrix. Strong lattice coupling between STO and MgO imposes a large lattice strain in the STO film. We have investigated ferroelectricity in the STO phase, existing up to room temperature, using piezoresponse force microscopy, phase field simulation and second harmonic generation. We also serendipitously discovered the formation of metastable TiO nanocores in MgO nanopillars embedded in the STO film matrix. Our results emphasize the design of new phases via vertical epitaxial strain in VAN thin films.
more »
« less
- PAR ID:
- 10230955
- Date Published:
- Journal Name:
- Nanoscale
- Volume:
- 12
- Issue:
- 35
- ISSN:
- 2040-3364
- Page Range / eLocation ID:
- 18193 to 18199
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Metamaterials present great potential in the applications of solar cells and nanophotonics, such as super lenses and other meta devices, owing to their superior optical properties. In particular, hyperbolic metamaterials (HMMs) with exceptional optical anisotropy offer improved manipulation of light–matter interactions as well as a divergence in the density of states and thus show enhanced performances in related fields. Recently, the emerging field of oxide–metal vertically aligned nanocomposites (VANs) suggests a new approach to realize HMMs with flexible microstructural modulations. In this work, a new oxide–metal metamaterial system, CeO 2 –Au, has been demonstrated with variable Au phase morphologies from nanoparticle-in-matrix (PIM), nanoantenna-in-matrix, to VAN. The effective morphology tuning through deposition background pressure, and the corresponding highly tunable optical performance of three distinctive morphologies, were systematically explored and analyzed. A hyperbolic dispersion at high wavelength has been confirmed in the nano-antenna CeO 2 –Au thin film, proving this system as a promising candidate for HMM applications. More interestingly, a new and abnormal in-plane epitaxy of Au nanopillars following the large mismatched CeO 2 matrix instead of the well-matched SrTiO 3 substrate, was discovered. Additionally, the tilting angle of Au nanopillars, α , has been found to be a quantitative measure of the balance between kinetics and thermodynamics during the depositions of VANs. All these findings provide valuable information in the understanding of the VAN formation mechanisms and related morphology tuning.more » « less
-
Abstract To investigate the role of interlayers on the growth, microstructure, and physical properties of 3D nanocomposite frameworks, a set of novel 3D vertically aligned nanocomposite (VAN) frameworks are assembled by a relatively thin interlayer (M) sandwiched by two consecutively grown La0.7Sr0.3MnO3(LSMO)‐ZnO VANs layers. ZnO nanopillars from the two VAN layers and the interlayer (M) create a heterogeneous 3D frame embedded in the LSMO matrix. The interlayer (M) includes yttria‐stabilized zirconia (YSZ), CeO2, SrTiO3, BaTiO3, and MgO with in‐plane matching distances increasing from ≈3.63 to ≈4.21 Å, and expected in‐plane strains ranging from tensile (≈8.81% on YSZ interlayer) to compressive (≈–6.23% on MgO interlayer). The metal‐insulator transition temperature increases from ≈133 K (M = YSZ) to ≈252 K (M = MgO), and the low‐field magnetoresistance peak value is tuned from ≈36.7% to ≈20.8%. The 3D heterogeneous frames empower excellent tunable magnetotransport properties and promising potentials for microstructure‐enabled applications.more » « less
-
δ-Bi 2 O 3 has long been touted as a potential material for use in solid oxide fuel cells (SOFC) due to its intrinsically high ionic conductivity. However, its limited operational temperature has led to stabilising the phase from >725 °C to room temperature either by doping, albeit with a compromise in conductivity, or by growing the phase confined within superlattice thin films. Superlattice architectures are challenging to implement in functional μSOFC devices owing to their ionic conducting channels being in the plane of the film. Vertically aligned nanocomposites (VANs) have the potential to overcome these limitations, as their nanocolumnar structures are perpendicular to the plane of the film, hence connecting the electrodes at top and bottom. Here, we demonstrate for the first time the growth of epitaxially stabilised δ-Bi 2 O 3 in VAN films, stabilised independently of substrate strain. The phase is doped with Dy and is formed in a VAN film which incorporates DyMnO 3 as a vertically epitaxially stabilising matrix phase. Our VAN films exhibit very high ionic conductivity, reaching 10 −3 S cm −1 at 500 °C. This work opens up the possibility to incorporate thin film δ-Bi 2 O 3 based VANs into functional μSOFC devices, either as cathodes (by pairing δ-Bi 2 O 3 with a catalytically active electronic conductor) and/or electrolytes (by incorporating δ-Bi 2 O 3 with an insulator).more » « less
-
Tuning spin and charge degrees of freedom of complex oxide materials can enable significant advancements in future spintronics. In this study, by three dimensional strain engineering, we demonstrate room temperature ferroelectricity and magnetoelectricity in a vertically aligned nanocomposite thin film structure, composed of vertical nanopillars of SmFeO3 (SFO) embedded within the NiFeO4 (NFO) matrix. A three-dimensional tensile strain is induced in the SFO as a result of the unique film architecture. The tensile strain in SFO produces strong room temperature ferroelectric response instead of the normally very weak ferroelectricity of unstrained SFO, which is an improper ferroelectric. The induced ferroelectricity in SFO enables self-biased magnetoelectric coupling to be achieved between the two phases (magnetoelectric coupling coefficient ∼4 × 10−11 sm−1 at room temperature). The magnetoelectric coupling is facilitated by strain transfer across the vertical interfaces of the two phases. We additionally observe an exchange bias of ∼200 Oe (at 2 K) surviving up to the room temperature, indicating strongly coupled interfaces of SFO and NFO. These findings represent a step forward in future magnetoelectric RAM devices.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1039/D0NR03460F
