skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Robotized Automation of Lipid Bilayer Deposition and Contact Angle Measurement
Contact angle measurement is a commonly used technique to measure the wettability of a solid surface The technique is highly susceptible to error when conducted by a human operator In this project, the experiment is robotized to increase accuracy, in which the Denso COBOTTA robot is used to dispense pure liquid drops onto a variety of surfaces in order to measure the contact angle for each surface. The experiment is currently being expanded for robotized deposition of lipid bilayer membranes.  more » « less
Award ID(s):
2000685
PAR ID:
10231330
Author(s) / Creator(s):
; ; ; ;
Date Published:
Journal Name:
UTC Technology Symposium-2021
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; (, Biomedical Sciences Instrumentation)
    Hydrophobic surfaces provide special characteristics for biomedical applications ranging from tunable protein adsorption, cellular interactions, and hemocompatibility to antibacterial coatings. In this research, we biomimic the hair-like micro-whisker structures of magnolia leaf using a synthetic polymeric formulation. Optical and scanning electron microscopy images revealed the presence of micro-whiskers resulting in higher water contact angles. The top layer of the magnolia leaf had a contact angle of 50º as compared to the hydrophobic bottom layer at 98º. A synthetic polymeric formulation was coated on different materials to study its effect on hydrophobicity. The coating was replicated (n=3) on each of the materials used such as glass, polymer, fabric, wood, and stainless steel. A surface tensiometer was used to measure the transition from hydrophilic to hydrophobic interactions between water and the substrate materials. Contact angle measurements revealed an increase in hydrophobicity for all the materials from their original uncoated surface. Glass displayed the highest increase in contact angle from 37º to 90º. Phase analysis of the coated region was performed to characterize the surface exposure of glass substrate to the synthetic polymeric formulation. An increase in the coated region showed a significant increase in contact angle from 50º to 95º. This research lays the foundation to develop and understand hydrophobic coatings for several biomedical applications including non-fouling implant surfaces, lab-on-chip devices, and other diagnostic tools. 
    more » « less
  2. ; ; ; (, Soft Matter)
    We introduce an accurate and efficient method for characterizing surface wetting and interfacial properties, such as the contact angle made by a liquid droplet on a solid surface, and the vapor–liquid surface tension of a fluid. The method makes use of molecular simulations in conjunction with the indirect umbrella sampling technique to systematically wet the surface and estimate the corresponding free energy. To illustrate the method, we study the wetting of a family of Lennard-Jones surfaces by water. For surfaces with a wide range of attractions for water, we estimate contact angles using our method, and compare them with contact angles obtained using droplet shapes. Notably, our method is able to capture the transition from partial to complete wetting as surface–water attractions are increased. Moreover, the method is straightforward to implement and is computationally efficient, providing accurate contact angle estimates in roughly 5 nanoseconds of simulation time. 
    more » « less
  3. ; ; ; (, Applied Physics Letters)
    The transmission interference fringe (TIF) technique was developed to visualize the dynamics of evaporating droplets based on the Reflection Interference Fringe (RIF) technique for micro-sized droplets. The geometric formulation was conducted to determine the contact angle (CA) and height of macro-sized droplets without the need for the prism used in RIF. The TIF characteristics were analyzed through experiments and simulations to demonstrate a wider range of contact angles from 0 to 90°, in contrast to RIF's limited range of 0–30°. TIF was utilized to visualize the dynamic evaporation of droplets in the constant contact radius (CCR) mode, observing the droplet profile change from convex-only to convex-concave at the end of dry-out from the interference fringe formation. The TIF also observed the contact angle increase from the fringe radius increase. This observation is uniquely reported as the interference fringe (IF) technique can detect the formation of interference fringe between the reflection from the center convex profile and the reflection from the edge concave profile on the far-field screen. Unlike general microscopy techniques, TIF can detect far-field interference fringes as it focuses beyond the droplet-substrate interface. The formation of the convex-concave profile during CCR evaporation is believed to be influenced by the non-uniform evaporative flux along the droplet surface. 
    more » « less
  4. ; ; (, 77th Annual Meeting of the Division of Fluid Dynamics)
    The wetting phenomenon at three-phase boundaries (solid, liquid, and gas) affects capillary-gravity wave scattering from barriers, but there is a lack of experimental data and comparison with simulations. The scattering is affected by surface tension and the contact lines at the three-phase boundary. When the solid surface conditions vary, the contact angle and the shape of the meniscus generated by the wetting effect change accordingly. It is possible to measure the influence of the wetting effect on the scattering by coating the barrier surface to be hydrophobic or hydrophilic. Our previous work focused on how the scattering is affected by the portion of the barrier immersed under the water surface with a pinned contact line. In this study, we will coat the barrier surface to experimentally measure how the wetting with different coatings affect the scattering. A comparison of the experimental measurements with numerical simulations of potential flow of the waves will be potentially included. 
    more » « less
  5. ; ; ; (, E3S Web of Conferences)
    McCartney, J.S.; Tomac, I. (Ed.)
    Immiscible multiphase flow in porous media is largely affected by interfacial properties, manifested in contact angle and surface tension. The gas-liquid surface tension can be significantly altered by suspended particles at the interface. Particle-laden interfaces have unique properties, for example, a lower surface tension of interfaces laden with surfactants or nanoparticles. This study investigates the impacts of a motile bacterium Escherichia coli ( E. coli , strain ATCC 9637) on the air-water surface tension. Methods of the maximum bubble pressure, the du Noüy ring, and the pendant droplet are used to measure the surface tension of the motile-bacteria-laden interfaces. Measured surface tension remains independent to the E. coli concentration when using the maximum bubble pressure method, decreases with increased E. coli concentration in the du Noüy ring method, and presents time-dependent changes by the pendant drop method. The analyses show that the discrepancies may come from the different convection-diffusion processes of E. coli in the flow among various testing methods. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email