More Like this

1. A window to the Early Cretaceous North American Climate and Environment: The ‘Lake Carpenter’ lacustrine strata of the Cedar Mountain Formation

   Suarez, M.B. ; Al-Suwaidi, A. ; Kirkland, J.I. ; Snell, K. ; Moller, A. ; McLean, N. ; Suarez, C.A. ; Montgomery, E. ; Paige, M. ( January 2023 , The Anatomical record Supplement)

   The Cedar Mountain Formation is thought to span a significant portion of the lower Cretaceous and the base of the upper Cretaceous (Valanginian to Cenomanian). As such, the Cedar Mountain Formation is important for understanding the transition of terrestrial ecosystems from those characterized by pre-angiosperm ecosystems of the Jurassic to the angiosperm-dominated ecosystems that characterized the height of dinosaur diversity in the later part of the Cretaceous. Lacustrine strata offer unique opportunities to shed light on environmental and climate conditions of the past. This study presents results from a multi-proxy study of lacustrine strata in the Cedar Mountain Formation termed “Lake Carpenter.” The sequence of strata is about ~30 m thick and located near Arches National Park. The lower ~7 m is characterized by dark organic-rich mudstones, shales, and tan limestones and dolostone. The middle portion between about 7 and 25m consists of more massive carbonate-rich strata with abundant aquatic fossils including ostracodes, charophytes, and fish scales. The upper portion to about 30 m consists of green to tan mudstones with carbonate nodules and increases in siliciclastic content. Carbonate mineralogies include calcite, high-magnesium calcite, and dolomite (including dolomicrites) based on XRD analyses. To put the lacustrine sequence into stratigraphic context, bulk organic C isotope values were utilized to construct a chemostratigraphic record. The carbon isotope values range from -32.3‰ to -21.1‰ vs. VPDB. Zircons from four suspected volcanic ash layers were analyzed for U-Pb using LA-ICP-MS. One of these produced concordant Cretaceous dates. The youngest zircons from this sample was analyzed using CA-ID-TIMS and produced a date of 115.65 ± 0.18 Ma. Based on the chemostratigraphic record and the U-Pb date, the deposition of the lacustrine sequence occurs in the mid to late Aptian and spans a time that is thought to have coincided with a cold snap based on marine records. Carbonate analyses of the carbonates within the lacustrine sequence ranges from -9.2‰ to +5.4‰ vs. VPDB for carbon and -9.3 to -0.3‰ vs. VPDB for oxygen. Overall, carbonate isotope data is positively covariant and along with the minerology, seems to suggest that the lake was a closed-basin, alkaline lake and would have likely experience significant evaporation. To investigate paleotemperature, selected samples were analyzed for clumped isotope values (47) to determine temperature of formation. Preliminary temperature estimates of calcite formation range from 27°C to 41°C. Estimates for dolomite range from 19°C to 21°C. Lacustrine carbonate formation typically is biased toward spring and summer and as such some of these temperatures (particularly the values for dolomites) seem slightly lower than expected for a greenhouse climate but may be consistent with a “cold-snap” during the late Aptian. Palustrine carbonates from the type section of the Ruby Ranch Member range 19.8°C to 44.5°C (Suarez et al. 2021) and suggests the lacustrine strata records a similar range in temperatures during the Aptian Stage in this part of North America. REFERENCES CITED: Suarez, MB, Knight, J, Snell, KE, Ludvigson, GA, Kirkland, JI, Murphy, L 2020. Multiproxy paleoclimate estimates of the continental Cretaceous Ruby Ranch Member of the Cedar Mountain Formation. In: Bojar, A-V, Pelc., A, Lecuyer, C, editors. Stable Isotopes Studies of Water Cycle and Terrestrial Environments. Geol Soc, London, Spec Pub, 507: https://doi.org/10.1144/SP507-2020-85 KEYWORDS: Early Cretaceous, lacustrine, stable isotopes, paleoclimate Presentation Mode: Invited Speaker 

   more » « less
2. Mixed carbonate–siliciclastic tidal sedimentation in the Miocene to Pliocene Bouse Formation, palaeo‐Gulf of California

   https://doi.org/10.1111/sed.12817  

   O’Connell, Brennan ; Dorsey, Rebecca J. ; Hasiotis, Stephen T. ; Hood, Ashleigh V. S. ; Reijmer, ed., John ( January 2021 , Sedimentology)

   Mixed carbonate–siliciclastic deposits provide unique insights into hydrodynamic processes that control sedimentation in tidal systems. This study presents sedimentological and ichnological data from the upper Miocene to lower Pliocene Bouse Formation, which accumulated during regional transgression at the margin of a tidal strait near the north end of the ancestral Gulf of California. The basal carbonate member of the Bouse Formation records deposition in a tide‐influenced, compositionally mixed carbonate–siliciclastic system dominated by salt marsh, tidal flat and channel environments. The basal carbonate member is an overall deepening up succession of facies associations comprising: Facies Association 1 – siliciclastic‐rich heterolithic facies, lime mudstone with desiccation cracks, and plant debris rich carbonate silt interpreted as siliciclastic‐rich tidal flats; Facies Association 2 – well‐sorted gravels, siliciclastic‐rich sandy strata, lime mudstone with desiccation cracks, and sandy microbial micrite interpreted as tidal‐channel deposits; Facies Association 3 – carbonate‐rich heterolithic lime mudstone to well‐sorted, cross‐bedded bioclastic grainstone interpreted as intertidal to shallow subtidal deposits; and Facies Association 4 – lime mudstone interpreted as shallow to deep subtidal low‐energy deposits that record the end of tidal conditions in the basin. Trace fossils include marine formsGyrolithes,TeichichnusandThalassinoides,and non‐diagnostic formsArenicolites,Cochlichnus,Conichnus,Lockeia,Planolites,SkolithosandTreptichnus(known from marine, brackish and freshwater environments). The diminutive size of trace fossils reflects brackish conditions created by mixing of freshwater and seawater. This study provides evidence for a late Miocene to early Pliocene humid climate in south‐western North America, in stark contrast to the modern hyperarid climate. Factors that controlled the relative percentage of mixed carbonate and siliciclastic sediment include siliciclastic input from local rivers,in situcarbonate production, current energy, degree of tidal mixing and relative sea level. Pronounced facies variability at bedform, outcrop and basin scale documented in this study appears to be an important characteristic of mixed carbonate–siliciclastic deposits in tidal depositional systems.

    

   more » « less
3. A new sequence stratigraphic model for the Silurian A-1 Carbonate (Ruff Formation) of the Michigan Basin

   Rine, M.J. ( January 2017 , Special paper - Geological Society of America)

   The A-1 Carbonate is the primary hydrocarbon source rock and an important reservoir component of the Silurian (Niagaran) pinnacle reef complexes in the Michigan Basin. The geology of the A-1 Carbonate, however, is not widely known because the majority of published research about this hydrocarbon system focuses on the pinnacle reefs. To gain a better understanding of the sedimentology and stratigraphy of the A-1 Carbonate, we integrated data from slabbed core, thin section petrography, gamma-ray logs, and energy-dispersive X-ray fl uorescence spectrometry (ED-XRF). Thirteen distinct lithofacies within the A-1 Carbonate are recognized, with inferred depositional environments ranging from intertidal-sabkha to deep basin. The recognition of deep-water lithofacies contrasts signifi cantly with previous interpretations of the A-1 Carbonate as a shallow, peritidal deposit. Lithofacies stacking patterns and ED-XRF elemental trends within the A-1 Carbonate are consistent with basinwide sea-level fl uctuations that resulted in deposition of three major stratigraphic units, called the Lower A-1 Carbonate, Rabbit Ear Anhydrite, and Upper A-1 Carbonate. The basal part of the Lower A-1 Carbonate was deposited during a basinwide transgression, as evidenced by deep-water pelagic carbonate accumulation in the basin center, lithofacies that become progressively muddier from bottom to top, and higher concentrations of Si, Al, and K upward, which are interpreted to refl ect the infl ux of continental sediments. The subsequent highstand deposits of the upper part of the Lower A-1 Carbonate are characterized by a decrease in Si, Al, and K, coupled with a shallowing-upward facies succession consistent with increased carbonate production rates. The Rabbit Ear Anhydrite, which bifurcates the Upper and Lower A-1 Carbonate units, exhibits a variety of anhydrite fabrics across a wide range of paleotopographic settings within the basin. The Rabbit Ear Anhydrite is interpreted to refl ect a time-correlative sea-level drawdown, which caused basin restriction, gypsum deposition, and elevated concentrations of redox-sensitive elements, such as Mo and Ni. The Upper A-1 Carbonate represents sedimentation during another major basinwide transgression that culminated in the deposition of shallow-water microbialites on the crests of previously exposed Niagara reef complexes. Similar to the Lower A-1 Carbonate, the base of the Upper A-1 Carbonate exhibits elemental signatures indicative of continental infl uence, whereas the overlying highstand deposits are characterized by more normal marine conditions and lower concentrations of Si, Al, and K. 

   more » « less
4. South China Sea Rifted Margin

   https://doi.org/10.14379/iodp.proc.367368.2018  

   Sun, Z. ; Jian, Z. ; Stock, J.M. ; Larsen, H.C. ; Klaus, A. ; Alvarez Zarikian, C.A. ( September 2018 , Proceedings of the International Ocean Discovery Program)

   null (Ed.)

   The primary objectives of International Ocean Discovery Program (IODP) Expedition 367/368 to the northern South China Sea (SCS) margin were to (1) examine its history of continental breakup and (2) compare it with other nonvolcanic or magma-poor rifted margins with the broader goal of testing models for continental breakup. A secondary objective was to further our understanding of the paleoceanographic and environmental development of the SCS and southeast Asia during the Cenozoic. Four primary sites were selected for the overall program: one in the outer margin high (OMH) and three seaward of the OMH on distinct, margin-parallel basement ridges. These three ridges are informally labeled A, B, and C and are located in the continent–ocean transition (COT) zone ranging from the OMH to the interpreted steady-state oceanic crust (Ridge C) of the SCS. The main scientific objectives include the following: Determining the nature of the basement in crustal units across the COT of the SCS that are critical to constrain style of rifting, Constraining the time interval from initial crustal extension and plate rupture to the initial generation of igneous ocean crust, Constraining vertical crustal movements during breakup, and Examining the nature of igneous activity from rifting to seafloor spreading. In addition, the sediment cores from the drill sites targeting primarily tectonic and basement objectives will provide information on the Cenozoic regional environmental development of the Southeast Asia margin. Site U1499 on Ridge A and Site U1500 on Ridge B were drilled during Expedition 367. Expedition 368 was planned to drill at two primary sites (U1501 and U1503) at the OMH and Ridge C, respectively, but based on drilling results from Expedition 367, Expedition 368 chose to insert an alternate site on Ridge A (Site U1502). In addition, Expedition 368 added two more sites on the OMH (Sites U1504 and U1505). Expedition 367/368 completed operations at six of the seven sites (U1499–U1502, U1504, and U1505). Site U1503, however, was not completed beyond casing without coring to 990 m because of mechanical problems with the drilling equipment that prevented the expedition, after 25 May 2017, from operating with a drill string longer than 3400 m. New alternate Site U1504, proposed during Expedition 367, met this condition. Original Site U1505 also met the operational constraints of the 3400 m drill string (total) and was an alternate site for the already-drilled Site U1501. At Site U1499, we cored to 1081.8 m in 22.1 days with 52% recovery and then logged downhole data from 655 to 1020 m. In 31 days at Site U1500, we penetrated to 1529 m, cored a total of 1012.8 m with 37% recovery, and collected log data from 842 to 1133 m. At Site U1501, we cored to 697.1 m in 9.4 days with 78.5% recovery. We also drilled ahead for 433.5 m in Hole U1501D and then logged downhole data from 78.3 to 399.3 m. In 19.3 days at Site U1502, we penetrated 1679.0 m in Holes U1502A (758 m) and U1502B (921 m), set 723.7 m of casing and cored a total of 576.3 m with 53.5% recovery, and collected downhole log data from 785.3 to 875.3 m and seismic data through the 10¾ inch casing. At Site U1503, we penetrated 995.1 m and set 991.5 m of 10¾ inch casing, but no cores were taken because of a mechanical problem with the drawworks. At Site U1504, we took 40 rotary core barrel (RCB) cores over two holes. The cored interval between both holes was 277.3 m with 26.8% recovery. An 88.2 m interval was drilled in Hole U1504B. At Site U1505, we cored 668.0 m with 101.1% recovery. Logging data was collected from 80.1 to 341.2 m. Operations at this site covered 6.1 days. Except for Sites U1503 and U1505, all sites were drilled to acoustic basement. A total of 6.65 days were lost due to mechanical breakdown or waiting on spare supplies for repair of drilling equipment, but drilling options were severely limited from 25 May to the end of the expedition by the defective drawworks limiting deployment of drill string longer than 3400 m. At Site U1499, coring ~200 m into the interpreted acoustic basement sampled sedimentary rocks, possibly including early Miocene chalks underlain by Oligocene polymict breccias and poorly cemented gravels of unknown age comprising sandstone pebbles and cobbles. Preliminary structural and lithologic analysis suggests that the gravels might be early to late synrift sediment. At Site U1500, the main seismic reflector corresponds to the top of a basalt sequence at ~1379.1 m. We cored 149.90 m into this volcanic package and recovered 114.92 m (77%) of sparsely to moderately plagioclase-phyric basalt comprising numerous lava flows, including pillow lavas with glass, chilled margins, altered veins, hyaloclastites, and minor sediment. Preliminary geochemical analyses indicate that the basalt is tholeiitic. Sampling of the Pleistocene to lower Miocene sedimentary section at Sites U1499 and U1500 was not continuous for two reasons. First, there was extremely poor recovery in substantial intervals interpreted to be poorly lithified sands, possibly turbidites. Second, we chose to drill down without coring in some sections at Site U1500 to ensure sufficient time to achieve this site’s high-priority deep drilling objectives. The upper Miocene basin sequence, which consists of interbedded claystone, siltstone, and sandstone can be correlated between the two sites by seismic stratigraphic mapping and biostratigraphy. At Site U1501 on the OMH, coring ~45 m into the acoustic basement sampled prerift(?) deposits comprising sandstone to conglomerate of presumed Mesozoic age. These deposits are overlain by siliciclastic synrift sediments of Eocene to Oligocene age followed by primarily carbonaceous postrift sediments of early Miocene to Pleistocene age. Site U1502 on Ridge A was cased to 723.7 m. No coring was attempted shallower than 380 m to save operational time and because of low expectations for core recovery in the upper Plio–Pleistocene sequence. At this site, we recovered 180 m of hydrothermally altered brecciated basalts comprising sheet and pillow lavas below deep-marine sediments of Oligocene to late Miocene age. At Site U1503 on Ridge C, 991.5 m of casing was installed in preparation for the planned deep drilling to ~1800 m. No coring was performed due to mechanical failures, and the site was abandoned without further activity except for installation of a reentry cone. Coring at Site U1504 on the OMH, located ~45 km east of Site U1501, recovered mostly foliated, greenschist facies metamorphic rocks below late Eocene(?) carbonate rocks (partly reef debris) and early Miocene to Pleistocene sediments. At Site U1505, we cored to 480.15 m through Pleistocene to late Oligocene mainly carbonaceous ooze followed at depth by early Oligocene siliciclastic sediments. Efforts were made at every drill site to correlate the core with the seismic data and seismic stratigraphic unconformities interpreted in the Eocene to Plio–Pleistocene sedimentary sequence prior to drilling. The predrilling interpretation of ages of these unconformities was in general confirmed by drilling results, although some nontrivial corrections can be expected from detailed postexpedition work on integrating seismic stratigraphic interpretations with detailed bio- and lithostratigraphy. As a result of the limited length of drill string that could be deployed during the later part of Expedition 368, the secondary expedition objectives addressing the environmental history of the SCS and Southeast Asia received more focus than originally planned, allowing Site U1505 (alternate to Site U1501) to be included. Despite this change in focus, Expedition 367/368 provided solid evidence for a process of breakup that included vigorous synrift magmatism as opposed to the often-favored interpretation of the SCS margin as a magma-starved margin or a margin possibly overprinted at a much later stage by plume-related magmatism. In this broader perspective, Expedition 367/368 accomplished a fundamental objective of the two-expedition science program. 

   more » « less
5. Frenchman Mountain Dolostone: A new formation of the Cambrian Tonto Group, Grand Canyon and Basin and Range, USA

   https://doi.org/10.1130/GES02514.1  

   Rowland, Stephen M. ; Korolev, Slava ; Hagadorn, James W. ; Ghosh, Kaushik ( March 2023 , Geosphere)

   We describe, interpret, and establish a stratotype for the Frenchman Mountain Dolostone (FMD), a new Cambrian stratigraphic unit that records key global geochemical and climate signals and is well exposed throughout the Grand Canyon and central Basin and Range, USA. This flat-topped carbonate platform deposit is the uppermost unit of the Tonto Group, replacing the informally named “undifferentiated dolomites.” The unit records two global chemostratigraphic events—the Drumian Carbon Isotope Excursion (DICE), when δ13Ccarb (refers to “marine carbonate rocks”) values in the FMD dropped to −2.7‰, and the Steptoean Positive Carbon Isotope Excursion (SPICE), when the values rose to +3.5‰. The formation consists of eight lithofacies deposited in shallow subtidal to peritidal paleoenvironments. At its stratotype at Frenchman Mountain, Nevada, the FMD is 371 m thick. Integration of regional trilobite biostratigraphy and geochronology with new stratigraphy and sedimentology of the FMD, together with new δ13Ccarb chemostratigraphy for the entire Cambrian succession at Frenchman Mountain, illustrates that the FMD spans ~7.2 m.y., from Miaolingian (lower Drumian, Bolaspidella Zone) to Furongian (Paibian, Dicanthopyge Zone) time. To the west, the unit correlates with most of the Banded Mountain Member of the ~1100-m-thick Bonanza King Formation. To the east, at Grand Canyon’s Palisades of the Desert, the FMD thins to 8 m due to pre–Middle Devonian erosion that cut progressively deeper cratonward. Portions of the FMD display visually striking, meter-scale couplets of alternating dark- and light-colored peritidal facies, while other portions consist of thick intervals of a single peritidal or shallow subtidal facies. Statistical analysis of the succession of strata in the stratotype section, involving Markov order and runs order analyses, yields no evidence of cyclicity or other forms of order. Autocyclic processes provide the simplest mechanism to have generated the succession of facies observed in the FMD. 

   more » « less