skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Shoulder Kinematics Assessment towards Exoskeleton Development
Neuromuscular and sensorimotor degeneration caused by stroke or any other disease significantly reduce the physical, cognitive, and social well-being across the life span. Mostly, therapeutic interventions are employed in order to restore the lost degrees-of-freedom (DOF) caused by such impairments and automating these therapeutic tasks through exoskeletons/robots is becoming a common practice. However, aligning these robotic devices with the complex anatomical and geometrical motions of the joints is very challenging. At the same time, a good alignment is required in order to establish a better synergy of human-exoskeleton system for an effective intervention procedure. In this paper, a case study of an exoskeleton and shoulder joint alignment were studied through different size and orientation impairment models through motion capture data and musculoskeletal modeling in OpenSim. A preliminary result indicates that shoulder elevation is very sensitive to misalignment and varies with shoulder joint axes orientation; this is partly due to drastic displacement of the upper arm axes with respect to the shoulder joint origin during elevation. Additional study and analysis is required to learn any possible restraint on shoulder elevation that could potentially help in the exoskeleton development.  more » « less
Award ID(s):
1915872
PAR ID:
10250297
Author(s) / Creator(s):
; ; ; ; ;
Date Published:
Journal Name:
Applied Sciences
Volume:
10
Issue:
18
ISSN:
2076-3417
Page Range / eLocation ID:
6336
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; (, Biomimetics)
    In this study, we introduce a two-dimensional (2D) human skeletal model coupled with knee, spine, and shoulder exoskeletons. The primary purpose of this model is to predict the optimal lifting motion and provide torque support from the exoskeleton through the utilization of inverse dynamics optimization. The kinematics and dynamics of the human model are expressed using the Denavit–Hartenberg (DH) representation. The lifting optimization formulation integrates the electromechanical dynamics of the DC motors in the exoskeletons of the knee, spine, and shoulder. The design variables for this study include human joint angle profiles and exoskeleton motor current profiles. The optimization objective is to minimize the squared normalized human joint torques, subject to physical and task-specific lifting constraints. We solve this optimization problem using the gradient-based optimizer SNOPT. Our results include a comparison of predicted human joint angle profiles, joint torque profiles, and ground reaction force (GRF) profiles between lifting tasks with and without exoskeleton assistance. We also explore various combinations of exoskeletons for the knee, spine, and shoulder. By resolving the lifting optimization problems, we designed the optimal torques for the exoskeletons located at the knee, spine, and shoulder. It was found that the support from the exoskeletons substantially lowers the torque levels in human joints. Additionally, we conducted experiments only on the knee exoskeleton. Experimental data indicated that using the knee exoskeleton decreases the muscle activation peaks by 35.00%, 10.03%, 22.12%, 30.14%, 16.77%, and 25.71% for muscles of the erector spinae, latissimus dorsi, vastus medialis, vastus lateralis, rectus femoris, and biceps femoris, respectively. 
    more » « less
  2. ; ; ; ; (, 2021 Design of Medical Devices Conference)
    null (Ed.)
    In this study, a methodology for designing a task-based exoskeleton which can recreate the end-effector trajectory of a given limb during a rehabilitation task/movement is presented. The exoskeleton provides an option to replace traditional joint-based exoskeleton joints, which often have alignment issues with the biological joint. The proper fit of the exoskeleton to the user and task are research topics to reduce pain or joint injuries as well as for the execution of the task. The proposed task-based synthesis method was successfully applied to generate the 3D motions of the elbow flexion and extensions using a one degree of freedom (DOF), spatial four-bar mechanism. The elbow joint is analyzed through motion capture system to develop the bio-exoskeleton. The resulted exoskeleton does not need to align with the corresponding limb joint to generate the desired anatomical motion. 
    more » « less
  3. ; ; (, Proceedings of the 2019 Design of Medical Devices Conference)
    This paper investigates the tradeoffs between design variables important for the development of a mobility support soft exoskeleton for horizontal shoulder adduction. The soft exoskeleton utilizes discreet shape memory alloy (SMA) spring actuators to generate the required torque to move the arm segment, while preserving the qualities of a soft, wearable garment solution. A pilot benchtop test involving varying power input, actuator anchor position, actuator orientation, and added weight, was investigated to evaluate their effects against the degree of motion the soft exoskeleton allows. The results show that the power input, actuator anchor position, and simulated limb weight each affect the ultimate horizontal adduction angle the exoskeleton is able to induce. Further, the project highlights a crucial point in regard to the tradeoffs between functionality and wearability: when actuator orientation was investigated, we found a decrement in functionality (as measured by maximum achievable horizontal adduction angle) when the actuators were constrained close to the body. This shows that when aiming to improve the hypothetical system’s wearability/usability, the effective torque that can be generated is reduced. Together these findings demonstrate important design considerations while developing a wearable, soft exoskeleton system that is capable of effectively supporting movement of the body while maintaining the comfort and discreetness of a regular garment. 
    more » « less
  4. (, Proceedings of IEEE EMBS Conference on Biomedical Engineering Sciences)
    This paper outlines the construction, current state, and future goals of HERCULES, a three degree-of-freedom (DoF) pneumatically actuated exoskeleton for stroke rehabilitation. The exoskeleton arm is capable of joint-angle control at the elbow in flexion and extension, at the shoulder in flexion and extension, and at the shoulder in abduction and adduction. In the near future we plan to embed kinematic synergies into the control system architecture of this arm to gain dexterous and near-natural movements. 
    more » « less
  5. ; ; ; (, Frontiers in Bioengineering and Biotechnology)
    Walking is the most common form of how animals move on land. The model organismDrosophila melanogasterhas become increasingly popular for studying how the nervous system controls behavior in general and walking in particular. Despite recent advances in tracking and modeling leg movements of walkingDrosophilain 3D, there are still gaps in knowledge about the biomechanics of leg joints due to the tiny size of fruit flies. For instance, the natural alignment of joint rotational axes was largely neglected in previous kinematic analyses. In this study, we therefore present a detailed kinematic leg model in which not only the segment lengths but also the main rotational axes of the joints were derived from anatomical landmarks, namely, the joint condyles. Our model with natural oblique joint axes is able to adapt to the 3D leg postures of straight and forward walking fruit flies with high accuracy. When we compared our model to an orthogonalized version, we observed that our model showed a smaller error as well as differences in the used range of motion (ROM), highlighting the advantages of modeling natural rotational axes alignment for the study of joint kinematics. We further found that the kinematic profiles of front, middle, and hind legs differed in the number of required degrees of freedom as well as their contributions to stepping, time courses of joint angles, and ROM. Our findings provide deeper insights into the joint kinematics of walking inDrosophila, and, additionally, will help to develop dynamical, musculoskeletal, and neuromechanical simulations. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email