Despite the proven benefits of natural ventilation (NV) as an effective low-carbon solution to meet growing cooling demand, its effectiveness can be constrained by poor outdoor air quality. Here, we propose a modeling approach that integrates highly granular air pollution data with a coupled EnergyPlus and differential equation airflow model to evaluate how NV potential for space cooling changes when accounting for air pollution exposure (PM2.5). Given the high vulnerability of low-income populations to air pollution and the dearth of energy and thermal comfort research on informal settlements, we applied our model to a typical informal settlement residence in two large Indian cities: New Delhi and Bangalore. Our results indicate that outdoor PM2.5 levels have a significant impact on NV potential especially in highly polluted cities like New Delhi. However, we found that low-cost filtration (MERV 14) increased the NV potential by 25% and protected occupants from harmful exposure to PM2.5 with a minor energy penalty of 6%. We further find that adoption of low-cost filtration is a viable low-carbon solution pathway as it provides both thermal comfort and exposure protection at 65% less energy intensity—energy intensity reduced to 60 kWh m−2from 173.5 kWh m−2in case of adoption of potentially unaffordable full mechanical air conditioning. Our work highlights ample opportunities for reducing both air pollution and energy consumption in informal settlements across major Indian cities. Finally, our work can guide building designers and policymakers to reform building codes for adopting low-cost air filtration coupled with NV and subsequently reduce energy demand and associated environmental emissions.
Computational study of natural ventilation in a sustainable building complex geometry
We deploy a fully coupled thermo-fluidic finite element approach to simulating natural ventilation in a sustainably designed building with complex geometry. The 'interlock house' uses building design for climate control instead of mechanical means (such as air conditioning). Therefore, accurately modeling the natural ventilation flows is crucial to assess thermal comfort in such designs. A residual-based variational multiscale method (VMS) is employed, which is a Large Eddy Simulation (LES) type approach to turbulence modeling. Air diffusion performance index (ADPI) and predicted mean vote (PMV) are computed to investigate thermal comfort in both configurations. This work illustrates the ability of the framework to comprehensively model and predict natural ventilation under various operating scenarios.
more »
« less
- Award ID(s):
- 1855902
- NSF-PAR ID:
- 10273661
- Date Published:
- Journal Name:
- Sustainable energy technologies and assessments
- Volume:
- 45
- ISSN:
- 2213-1388
- Page Range / eLocation ID:
- 101153
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract -
It is well established that thermal comfort is an influential factor in human health and wellbeing. Uncomfortable thermal environments can reduce occupants’ comfort and productivity, and cause symptoms of sick building syndrome. To harness the built environment as a medium to support human health, well-being, and engagement, it is significantly important to understand occupants’ thermal comfort in real time. To this end, this study proposes a non-intrusive method to collect occupants’ facial skin temperature and interpret their thermal comfort conditions by fusing the thermal and RGB-D images collected from multiple low-cost thermographic and Kinect sensors. This study distinguishes from existing methods of thermal comfort assessment in three ways: 1) it is a truly non-intrusive data collection approach which has a minimal interruption or participation of building occupants; 2) the proposed approach can simultaneously identify and interpret multiple occupants’ thermal comfort; 3) it uses low-cost thermographic and RGB-D cameras which can be rapidly deployed and reconfigured to adapt to various settings. This approach was experimentally evaluated in a transient heating environment (room temperature increased from 23 to 27 °C) to verify its applicability in real operational built environments. In total, all 6 subjects observed moderate to strong positive correlations between the ambient room temperature and subjects’ facial skin temperature collected using the proposed approach. Additionally, all 6 subjects have voted different thermal sensations at the beginning (the first 5 minutes) and at the end (the last 5 minutes) of the heating experiment, which can be reflected by the significant differences in the mean skin temperature of these two periods (p < .001). Results of this pilot study demonstrate the feasibility of applying the proposed non-intrusive approach to real multi-occupancy environments to dynamically interpret occupants’ thermal comfort and optimize the operation of building heating, ventilation and air conditioning (HVAC) systems.more » « less
-
Thermal comfort is a significant factor in the indoor building environment because it influences both human productivity and health. A currently popular method for predicting thermal comfort levels, the Predicted Mean Vote (PMV) and Predicted Percent Dissatisfied (PPD) model, unfortunately, has certain limitations. Consequently, the development of a better method for making accurate predictions (especially for individuals) is needed. Our goal was to develop a tool to predict individual thermal comfort preferences and automatically control the heating, ventilation, and air conditioning (HVAC) systems. This study adopted a series of human-subject experiments to collect essential data. All collected data was analyzed by adopting different machine learning algorithms. The machine learning algorithms predicted individual thermal comfort levels and thermal sensations, based on facial skin temperatures of participants in the experiments. These predictions were input data for the HVAC system control model, and results supported the potential for using facial skin temperatures to predict thermal comfort and thermal sensation levels. Moreover, this tool provided automatic control of the HVAC systems that can help improve the indoor environment of a building.more » « less
-
Understanding occupants’ thermal sensation and comfort is essential to defining the operational settings for Heating, Ventilation and Air Conditioning (HVAC) systems in buildings. Due to the continuous impact of human and environmental factors, occupants’ thermal sensation and comfort level can change over time. Thus, to dynamically control the environment, thermal comfort should be monitored in real time. This paper presents a novel non-intrusive infrared thermography framework to estimate an occupant’s thermal comfort level by measuring skin temperature collected from different facial regions using low- cost thermal cameras. Unlike existing methods that rely on placing sensors directly on humans for skin temperature measurement, the proposed framework is able to detect the presence of occupants, extract facial regions, measure skin temperature features, and interpret thermal comfort conditions with minimal interruption of the building occupants. The method is validated by collecting thermal comfort data from a total of twelve subjects under cooling, heating and steady-state experiments. The results demonstrate that ears, nose and cheeks are most indicative of thermal comfort and the proposed framework can be used to assess occupants’ thermal comfort with an average accuracy of 85%.more » « less
-
Heating, ventilation and air-conditioning (HVAC) systems have been adopted to create comfortable, healthy and safe indoor environments. In the control loop, the technical feature of the human demand-oriented supply can help operate HVAC effectively. Among many technical options, real time monitoring based on feedback signals from end users has been frequently reported as a critical technology to confirm optimizing building performance. Recent studies have incorporated human thermal physiology signals and thermal comfort/discomfort status as real-time feedback signals. A series of human subject experiments used to be conducted by primarily adopting subjective questionnaire surveys in a lab-setting study, which is limited in the application for reality. With the help of advanced technologies, physiological signals have been detected, measured and processed by using multiple technical formats, such as wearable sensors. Nevertheless, they mostly require physical contacts with the skin surface in spite of the small physical dimension and compatibility with other wearable accessories, such as goggles, and intelligent bracelets. Most recently, a low cost small infrared camera has been adopted for monitoring human facial images, which could detect the facial skin temperature and blood perfusion in a contactless way. Also, according to latest pilot studies, a conventional digital camera can generate infrared images with the help of new methods, such as the Euler video magnification technology. Human thermal comfort/discomfort poses can also be detected by video methods without contacting human bodies and be analyzed by the skeleton keypoints model. In this review, new sensing technologies were summarized, their cons and pros were discussed, and extended applications for the demand-oriented ventilation were also reviewed as potential development and applications.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/https://doi.org/10.1016/j.seta.2021.101153
