Abstract Phosphorus (P) and nitrogen (N) are essential nutrients for food production but their excess use in agriculture can have major social costs, particularly related to water quality degradation. Nutrient footprint approaches estimate N and P release to the environment through food production and waste management and enable linking these emissions to particular consumption patterns. Following an established method for quantifying a consumer-oriented N footprint for the United States (U.S.), we calculate an analogous P footprint and assess the N:P ratio across different stages of food production and consumption. Circa 2012, the average consumer’s P footprint was 4.4 kg P capita−1yr−1compared to 22.4 kg N capita−1yr−1for the food portion of the N footprint. Animal products have the largest contribution to both footprints, comprising >70% of the average per capita N and P footprints. The N:P ratio of environmental release based on virtual nutrient factors (kilograms N or P per kilogram of food consumed) varies considerably across food groups and stages. The overall N:P ratio of the footprints was lower (5.2 by mass) than for that of U.S. food consumption (8.6), reinforcing our finding that P is managed less efficiently than N in food production systems but more efficiently removed from wastewater. While strategies like reducing meat consumption will effectively reduce both N and P footprints by decreasing overall synthetic fertilizer nutrient demands, consideration of how food production and waste treatment differentially affect N and P releases to the environment can also inform eutrophication management.
more »
« less
Meta-analysis of non-reactive phosphorus in water, wastewater, and sludge, and strategies to convert it for enhanced phosphorus removal and recovery
- Award ID(s):
- 1554511
- PAR ID:
- 10281951
- Date Published:
- Journal Name:
- Science of The Total Environment
- Volume:
- 644
- Issue:
- C
- ISSN:
- 0048-9697
- Page Range / eLocation ID:
- 661 to 674
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract National nutrient inventories provide surplus phosphorus (P) estimates derived from county‐scale mass balance calculations using P inputs from manure and fertilizer sales and P outputs from crop yield data. Although bioavailable P and surplus P are often correlated at the field scale, few studies have investigated the relationship between measured soil P concentrations of large‐scale soil testing programs and inventory‐based surplus P estimates. In this study, we assessed the relationship between national surplus P data from the NuGIS dataset and laboratory‐measured soil test phosphorus (STP) at the county scale for Arkansas, North Carolina, and Oklahoma. For optimal periods of surplus P aggregation, surplus P was positively correlated with STP based on both Pearson (Arkansas:r = 0.65, North Carolina:r = 0.45, Oklahoma:r = 0.52) and Spearman correlation coefficients (Arkansas:ρ = 0.57, North Carolina:ρ = 0.28, and Oklahoma:ρ = 0.66). Based on Pearson correlations, the optimal surplus P aggregation periods were 10, 30, and 4 years for AR, NC, and OK, respectively. On average, STP was more strongly correlated with surplus P than with individual P inventory components (fertilizer, manure, and crop removal), except in North Carolina. In Arkansas and North Carolina, manure P was positively correlated with STP, and fertilizer P was negatively correlated with STP. Altogether, results suggest that surplus P moderately correlates with STP concentrations, but aggregation period and location‐specific factors influence the strength of the relationship.more » « less
-
Abstract The economic viability of corn biorefineries depends heavily on the sale of coproducts as animal feeds, but elevated phosphorus (P) contents can exacerbate manure management issues. Phosphorus removal from light steep water and thin stillage, two concentrated in‐process aqueous streams at wet milling and dry‐grind corn biorefineries, could simultaneously generate concentrated fertilizer and low‐P animal feeds, but little is known regarding how differences in stream composition affect removal. To address this data gap, we show that the solubility of P in light steep filtrate (LSF) and thin stillage filtrate (TSF) exhibits distinct sensitivity to calcium (Ca) and base addition due to differences in P fractionation and protein abundance. In LSF, P was primarily organic, and near‐complete removal of P (96%) was observed at pH 8 and a Ca/total P (TP) ratio of 2. In TSF, TP removal was lower (81%), and there was more equal distribution of organic and orthophosphate, indicating that the Ca requirements of inorganic P precipitation were a limiting factor. The C/H/N ratio, elemental characterization, and crude protein analysis of the precipitated solids indicated that coprecipitation of amorphous solids containing Ca, Mg, and K with soluble proteins facilitated removal of P, particularly in LSF. Although the removal mechanisms and solubility limits differed, these results highlighted the magnitude (40–70 mM) and efficacy (80–96%) of P recovery from two biorefinery streams.more » « less
-
While biopolymers have the potential to enhance agrochemical delivery and mitigate environmental impacts such as runoff, previous plant studies have often been limited to examining single biopolymers in isolation. This approach has hindered effective comparisons of plant outcomes due to variations in plant type, growth duration, and soil characteristics. The current study addresses this gap by incorporating six separate milled biopolymers: pectin, starch, chitosan, polycaprolactone (PCL), polylactic acid (PLA), or polyhydroxybutyrate (PHB) into soil and directly comparing their impacts on tomato (Solanum lycopersicum) plants cultivated under identical environmental parameters. Plant outcomes were also studied when biopolymers were modified via the inclusion of two phosphorus (P) salts, forming two types of Polymer-P-containing salt composites with amorphous CaPO4 (CaP) and CaHPO4 (DCP). Our results revealed that chitosan-based treatments significantly improved tomato root and shoot biomass, with increases of 200–300% compared to the control plants. Chitosan-CaP and Chitosan-DCP also enhanced P uptake, though the effect was significantly more pronounced in the former, suggesting a synergy between chitosan and CaP. Neither Chitosan-P-containing salt treatment, however, mitigated P leaching from soil when compared to CaP or DCP applied in isolation. The two most hydrophilic biopolymers, pectin and starch, as well as their P-salt-containing counterparts, showed the most substantial reductions in biomass (∼80%) with respect to control plants, while similarly lowering P uptake and P retention in soil compared to CaP- and DCP-only plants. PCL- and PHB-based treatments also adversely influenced biomass and plant P, though these effects were not as drastic as those observed with pectin and starch. PLA-based soil amendments had no effect on any plant performance metric, though PLA-CaP, specifically, was the only treatment to appreciably mitigate P leaching (−63%). Based on these findings, subsequent tomato growth experiments were conducted over a longer 8-week period with CaP, DCP, Chitosan, Chitosan-CaP, and Chitosan-DCP. While all chitosan-treated plants showed similar enhancements in biomass, plants treated with Chitosan-CaP and Chitosan-DCP were the only ones to fruit, demonstrating the benefit of using chitosan in conjunction with a P source as compared to either treatment in isolation. These findings contribute to an expanding body of evidence that biopolymer carriers can offer a more sustainable approach to improving the precision of nutrient delivery, while also highlighting the pivotal role of biopolymer and nutrient type in the development of these carriers.more » « less
An official website of the United States government

