skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.
Attention:The NSF Public Access Repository (NSF-PAR) system and access will be unavailable from 7:00 AM ET to 7:30 AM ET on Friday, April 24 due to maintenance. We apologize for the inconvenience.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Flexible crystalline β-Ga 2 O 3 solar-blind photodetectors
This paper reports the fabrication of β-Ga 2 O 3 nanomembrane (NM) based flexible photodetectors (PDs) and the investigation of their optoelectrical properties under bending conditions. Flexible β-Ga 2 O 3 NM PDs exhibited reliable solar-blind photo-detection under bending conditions. Interestingly, a slight shifting in wavelength of the maximum solar-blind photo-current was observed under the bending condition. To investigate the reason for this peak shifting, the optical properties of β-Ga 2 O 3 NMs under different strain conditions were measured, which revealed changes in the refractive index, extinction coefficient and bandgap of strained β-Ga 2 O 3 NMs due to the presence of nano-sized cracks in the β-Ga 2 O 3 NMs. The results of a multiphysics simulation and a density-functional theory calculation for strained β-Ga 2 O 3 NMs showed that the conduction band minimum and the valence band maximum states were shifted nearly linearly with the applied uniaxial strain, which caused changes in the optical properties of the β-Ga 2 O 3 NM. We also found that nano-gaps in the β-Ga 2 O 3 NM play a crucial role in enhancing the photoresponsivity of the β-Ga 2 O 3 NM PD under bending conditions due to the secondary light absorption caused by reflected light from the nano-gap surfaces. Therefore, this research provides a viable route to realize high-performance flexible photodetectors, which are one of the indispensable components in future flexible sensor systems.  more » « less
Award ID(s):
1809077
PAR ID:
10284027
Author(s) / Creator(s):
; ; ; ; ; ; ;
Date Published:
Journal Name:
Journal of Materials Chemistry C
Volume:
8
Issue:
42
ISSN:
2050-7526
Page Range / eLocation ID:
14732 to 14739
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; ; (, Journal of Materials Chemistry C)
    null (Ed.)
    In this paper, we demonstrated large-size free-standing single-crystal β-Ga 2 O 3 NMs fabricated by the hydrogen implantation and lift-off process directly from MOCVD grown β-Ga 2 O 3 epifilms on native substrates. The optimum implantation conditions were simulated with a Monte-Carlo simulation method to obtain a high hydrogen concentration with a narrow ion distribution at the desired depth. Two as grown β-Ga 2 O 3 samples with different orientations ([100] and [001]) were used to successfully create 1.2 μm thick β-Ga 2 O 3 NMs without any physical damage. These β-Ga 2 O 3 NMs were then transfer-printed onto rigid and flexible substrates such as SiC and polyimide substrates. Various material characterization studies were performed to investigate their crystal quality, surface morphologies, optical properties, mechanical properties, and bandgaps before and after the lift-off and revealed that the good material quality was maintained. This result offers several benefits in that the thickness, doping, and size of β-Ga 2 O 3 NMs can be fully controlled. Moreover, more advanced β-Ga 2 O 3 -based NM structures such as (Al x Ga 1−x ) 2 O 3 /Ga 2 O 3 heterostructure NMs can be directly created from their bulk epitaxy substrates; thus this study provides a viable route for the realization of high performance β-Ga 2 O 3 NM-based electronics and optoelectronics that can be built on various substrates and platforms. 
    more » « less
  2. ; (, Journal of Physics D: Applied Physics)
    Abstract In this paper, transient delayed rise and fall times for beta gallium oxide ( β -Ga 2 O 3 ) nanomembrane (NM) Schottky barrier diodes (SBDs) formed on four different substrates (diamond, Si, sapphire, and polyimide) were measured using a sub-micron second resolution time-resolved electrical measurement system under different temperature conditions. The devices exhibited noticeably less-delayed turn on/turn off transient time when β -Ga 2 O 3 NM SBDs were built on a high thermal conductive (high- k ) substrate. Furthermore, a relationship between the β -Ga 2 O 3 NM thicknesses under different temperature conditions and their transient characteristics were systematically investigated and verified it using a multiphysics simulator. Overall, our results revealed the impact of various substrates with different thermal properties and different β -Ga 2 O 3 NM thicknesses on the performance of β -Ga 2 O 3 NM-based devices. Thus, the high- k substrate integration strategy will help design future β -Ga 2 O 3 -based devices by maximizing heat dissipation from the β -Ga 2 O 3 layer. 
    more » « less
  3. ; ; ; ; ; (, Advanced Optical Materials)
    Abstract The design and development of solar‐blind photodetectors utilizing ultrawide bandgap semiconductors have garnered significant attention due to their extensive utility in specialty commercial sectors. Solar‐blind photodetectors that display excellent photosensitivity, fast response time and are produced using cost‐effective fabrication steps will fulfill the performance demands in relevant applications. Herein, highly textured Sn‐doped Ga2O3thin film metal‐semiconductor‐metal type deep‐UV photodetectors using a commercially scalable magnetron sputtering method are reported. Commercially achievable growth and fabrication steps are intentionally chosen to demonstrate an economically viable photodetection workflow without compromising the device's performance. In‐depth structural, morphological, chemical, and optical characterization are reported to optimize the configuration for further device fabrication and testing. Under transient triggering circumstances, a fast response time of ≈500 ms is reported, accompanied by a responsivity of ≈60.5 A W−1. The detectivity, external quantum efficiency, and photo‐to‐dark current ratio values are reported as 1.6 × 1013Jones, 2.8 × 104%, and 17.4, respectively. The overall device performance and cost‐effective fabrication process for solar‐blind UV photodetection using Sn‐doped Ga2O3is promising. The approach holds promise for significant implications toward the development of electronics capable of functioning in extreme environments and exhibits substantial potential for enhancing low‐cost UV photodetector technology. 
    more » « less
  4. ; ; ; ; ; ; ; (, APL Materials)
    Phase pure β-(Al x Ga 1−x ) 2 O 3 thin films are grown on (001) oriented β-Ga 2 O 3 substrates via metalorganic chemical vapor deposition. By systematically tuning the precursor molar flow rates, the epitaxial growth of coherently strained β-(Al x Ga 1−x ) 2 O 3 films is demonstrated with up to 25% Al compositions as evaluated by high resolution x-ray diffraction. The asymmetrical reciprocal space mapping confirms the growth of coherent β-(Al x Ga 1−x ) 2 O 3 films (x < 25%) on (001) β-Ga 2 O 3 substrates. However, the alloy inhomogeneity with local segregation of Al along the ([Formula: see text]) plane is observed from atomic resolution STEM imaging, resulting in wavy and inhomogeneous interfaces in the β-(Al x Ga 1−x ) 2 O 3 /β-Ga 2 O 3 superlattice structure. Room temperature Raman spectra of β-(Al x Ga 1−x ) 2 O 3 films show similar characteristics peaks as the (001) β-Ga 2 O 3 substrate without obvious Raman shifts for films with different Al compositions. Atom probe tomography was used to investigate the atomic level structural chemistry with increasing Al content in the β-(Al x Ga 1−x ) 2 O 3 films. A monotonous increase in chemical heterogeneity is observed from the in-plane Al/Ga distributions, which was further confirmed via statistical frequency distribution analysis. Although the films exhibit alloy fluctuations, n-type doping demonstrates good electrical properties for films with various Al compositions. The determined valence and conduction band offsets at β-(Al x Ga 1−x ) 2 O 3 /β-Ga 2 O 3 heterojunctions using x-ray photoelectron spectroscopy reveal the formation of type-II (staggered) band alignment. 
    more » « less
  5. ; ; ; ; ; ; (, Applied Physics Letters)
    β-Ga 2 O 3 is an emerging ultra-wide bandgap semiconductor, holding a tremendous potential for power-switching devices for next-generation high power electronics. The performance of such devices strongly relies on the precise control of electrical properties of β-Ga 2 O 3 , which can be achieved by implantation of dopant ions. However, a detailed understanding of the impact of ion implantation on the structure of β-Ga 2 O 3 remains elusive. Here, using aberration-corrected scanning transmission electron microscopy, we investigate the nature of structural damage in ion-implanted β-Ga 2 O 3 and its recovery upon heat treatment with the atomic-scale spatial resolution. We reveal that upon Sn ion implantation, Ga 2 O 3 films undergo a phase transformation from the monoclinic β-phase to the defective cubic spinel [Formula: see text]-phase, which contains high-density antiphase boundaries. Using the planar defect models proposed for the [Formula: see text]-Al 2 O 3 , which has the same space group as β-Ga 2 O 3 , and atomic-resolution microscopy images, we identify that the observed antiphase boundaries are the {100}1/4 ⟨110⟩ type in cubic structure. We show that post-implantation annealing at 1100 °C under the N 2 atmosphere effectively recovers the β-phase; however, nano-sized voids retained within the β-phase structure and a [Formula: see text]-phase surface layer are identified as remanent damage. Our results offer an atomic-scale insight into the structural evolution of β-Ga 2 O 3 under ion implantation and high-temperature annealing, which is key to the optimization of semiconductor processing conditions for relevant device design and the theoretical understanding of defect formation and phase stability. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Text Encoded Conversion
  • XML
  • Save / Share this Record
  • Send to Email