The adsorption and decomposition of HCN on the Pd(111) and Ru(001) surfaces have been studied with reflection absorption infrared spectroscopy and density functional theory calculations. The results are compared to earlier studies of HCN adsorption on the Pt(111) and Cu(100) surfaces. In all cases the initial adsorption at low temperatures gives rise to a ν (C–H) stretch peak at ∼3300 cm −1 , which is very close to the gas phase value indicating that the triple CN bond is retained for the adsorbed molecule. When the Pd(111) surface is heated to room temperature, the HCN is converted to the aminocarbyne species, CNH 2 , which was also observed on the Pt(111) surface. DFT calculations confirm the high stability of CNH 2 on Pd(111), and suggest a bi-molecular mechanism for its formation. When HCN on Cu(100) is heated, it desorbs without reaction. In contrast, no stable intermediates are detected on Ru(001) as the surface is heated, indicating that HCN decomposes completely to atomic species.
more »
« less
Surface structure sensitivity of hydrodeoxygenation of biomass-derived organic acids over palladium catalysts: a microkinetic modeling approach
Microkinetic models based on parameters obtained from density functional theory and transition state theory have been developed for the hydrodeoxygenation (HDO) of propanoic acid, a model lignocellulosic biomass-derived organic acid, over the flat Pd(100) and Pd(111) surfaces in both vapor and liquid phase reaction conditions. The more open Pd(100) surface was found to be 3–7 orders of magnitude more active than the Pd(111) surface in all reaction environments, indicating that the (111) surface is not catalytically active for the HDO of propanoic acid. Over Pd(100) and in vapor phase, liquid water, and liquid 1,4-dioxane, propanoic acid hydrodeoxygenation follows a decarbonylation (DCN) mechanism that is facilitated by initial α- and β-carbon dehydrogenation steps, prior to the rate controlling C–OH and (partially rate controlling) C–CO bond dissociations. Only over Pd(111) and aqueous reaction environments is the decarboxylation (DCX) preferred over the DCN with the C–CO 2 step being rate controlling.
more »
« less
- Award ID(s):
- 1632824
- PAR ID:
- 10284084
- Date Published:
- Journal Name:
- Catalysis Science & Technology
- ISSN:
- 2044-4753
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
more » « less
The grandest challenge in the direct upgrade of methane to useful chemicals is finding a catalyst that is active for the difficult C—H bond scission yet selective such that not all of the C—H bonds break to form coke or CO2. The Au3Pd(111) surface is studied for methane activation, particularly due to its surface geometry containing a single Pd atom fully surrounded by Au atoms. Through density functional theory (DFT) calculations, the nonoxidative and oxidative mechanisms for methane activation are examined. In the nonoxidative mechanism, the initial C—H bond scission on Au3Pd(111) resembles that of Pd(111), but the subsequent dehydrogenation steps are more difficult than the first, mimicking pure Au(111). In the oxidative mechanism, the dilute Pd atom in Au3Pd(111) draws oxygenated adsorbates to the weakly binding Au surface to assist in the activation of methane. In both cases, Au3Pd(111) merges the activity of pure Pd(111) and the selectivity of pure Au(111), indicating the promise of isolated reactive metals as a potential catalyst for the upgrade of methane and other dehydrogenation processes.
-
Catalytic hydrodeoxygenation (HDO) of phenolics is a necessary step for upgrading bio-oils to transportation fuels. Bimetallic catalysts offer the potential of increased activities and selectivities for desired products. Adding non-metallic elements, such as phosphorous, allows for charge distribution between the metal and nonmetal atoms, which improves Lewis acid character of catalytic surfaces. This work utilizes experimental and density functional theory (DFT) based calculations to identify potential C–O bond cleavage pathways and product selectivities for HDO reactions on FeMoP, RuMoP, and NiMoP catalysts. Our work demonstrates that FeMoP catalyst favors direct deoxygenation pathway due to a lower activation energy barrier for C–O bond cleavage whereas RuMoP and NiMoP catalysts promote ring hydrogenation first, followed by the cleavage of C–O bond. The Bader charge analysis indicates that for these catalytic systems Mo δ+ site bears a large positive charge which acts as a Lewis acid site for HDO reactions. Overall, we find that trends in the experimental product selectivities are in good agreement with that predicted with DFT calculations.more » « less
-
more » « less
Abstract This article describes a systematic study of the oxidative etching and regrowth behaviors of Pd nanocrystals, including single‐crystal cubes bounded by {100} facets, single‐crystal octahedra and tetrahedra enclosed by {111} facets; and multiple‐twinned icosahedra covered by {111} facets and twin boundaries. During etching, Pd atoms are preferentially oxidized and removed from the corners regardless of the type of nanocrystal, and the resultant Pd2+ions are then reduced back to elemental Pd. For cubes and icosahedra, the newly formed Pd atoms are deposited on the {100} facets and twin boundaries, respectively, due to their relatively higher energies. For octahedra and tetrahedra, the Pd atoms self‐nucleate in the solution phase, followed by their growth into small particles. We can control the regrowth rate relative to etching rate by varying the concentration of HCl in the reaction solution. As the concentration of HCl is increased, 18‐nm Pd cubes are transformed into octahedra of 23, 18, and 13 nm, respectively, in edge length. Due to the absence of regrowth, however, Pd octahedra are transformed into truncated octahedra, cuboctahedra, and spheres with decreasing sizes whereas Pd tetrahedra evolve into truncated tetrahedra and spheres. In contrast, Pd icosahedra with twin boundaries on the surface are converted to asymmetric icosahedra, flower‐like icosahedra, and spheres. This work not only advances the understanding of etching and growth behaviors of metal nanocrystals with various shapes and twin structures but also offers an alternative method for controlling their shape and size.
-
For the conversion of CO 2 into fuels and chemical feedstocks, hybrid gas/liquid-fed electrochemical flow reactors provide advantages in selectivity and production rates over traditional liquid phase reactors. However, fundamental questions remain about how to optimize conditions to produce desired products. Using an alkaline electrolyte to suppress hydrogen formation and a gas diffusion electrode catalyst composed of copper nanoparticles on carbon nanospikes, we investigate how hydrocarbon product selectivity in the CO 2 reduction reaction in hybrid reactors depends on three experimentally controllable parameters: (1) supply of dry or humidified CO 2 gas, (2) applied potential, and (3) electrolyte temperature. Changing from dry to humidified CO 2 dramatically alters product selectivity from C 2 products ethanol and acetic acid to ethylene and C 1 products formic acid and methane. Water vapor evidently influences product selectivity of reactions that occur on the gas-facing side of the catalyst by adding a source of protons that alters reaction pathways and intermediates.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1039/D1CY01029H
