skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Surface Composition Studies of CdZnTe Material Using X-Ray Photoelectron Spectroscopy
High-resistivity zinc cadmium telluride (CdZnTe) semiconductor is a very popular material for room-temperature nuclear detection applications. It is used for the detection of X-rays and gamma rays in many areas: nuclear and radiological threat detection, medical imaging, gamma spectroscopy, and astrophysics. Mechanical stability at the interface of electrical contacts and the detector material is an important factor in terms of durability and shelf life of detector devices. Other engineering factors where that interface plays an important role include thermal expansion due to temperature changes and vibrations that may result from certain applications. The surface composition of the material play an important role in the surface stability of the material. The stoichiometric composition of the detector surfaces also affects its surface current, which, in turn, contributes to electronic noise. High electronic noise is detrimental to the energy resolution of the detector device. X-ray photoelectron spectroscopy (XPS) is a good technique for determining dominant surface composition of materials. In this current study, the authors used an XPS to look at the dominant composition materials on the surface of a CdZnTe wafer. The experiments involved loading CdZnTe wafers into the XPS machine and recording the peaks of the binding energies of elements and compounds present on the surfaces. The XPS results showed the presence of Zn, Te, O, Cd, C, Cl, Si, and TeO2. These results are important in the engineering of CdZnTe radiation detection devices.  more » « less
Award ID(s):
1828729 1818732
PAR ID:
10285229
Author(s) / Creator(s):
; ; ; ; ; ;
Date Published:
Journal Name:
The international journal of modern engineering
Volume:
21
Issue:
2
ISSN:
1930-6628
Page Range / eLocation ID:
40 - 44
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; ; (, 2020 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC))
    Cadmium zinc telluride (CdZnTe) and cadmium manganese telluride (CdMnTe) semiconductor nuclear detectors have the ability to operate at room temperature without cryogenic cooling. Thus, they can be fabricated into portable nuclear detection devices that can be used at seaports and border security, and at nuclear facilities to monitor radiation levels. In this paper, we present results from the use of X-ray photoelectron spectroscopy (XPS) to study the surface compositions of CdZnTe and CdMnTe wafers. Our results showed that Cd, Te and TeO2 are the dominant species on these materials. Zn was also present on CdZnTe wafer, and Mn is present on the CdMnTe wafer. CdZnTe samples that were etched with high-energy ion beam did not show the presence of TeO2 on their surfaces. 
    more » « less
  2. ; ; ; ; ; ; ; ; ; (, 2021 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC))
    Cadmium telluride (CdTe) and its ternary and quaternary compounds have found applications in the development of X-ray and gamma-ray detectors used in nuclear detection and medical imaging applications. Example of these detectors include CdZnTe (CZT), CdMnTe (CMT), and CdZnTeSe (CZTS). These nuclear detectors can operate at room temperature without cryogenic cooling. This paper presents comparative studies of these semiconductor material. The properties studied include detector resistivity, Te inclusions, grain boundary networks, mobility/lifetime of the charge carriers, and energy resolution. The effects of passivation with chemicals such as KOH and NH4F, are also presented. X-ray photoelectron spectroscopy (XPS) studies showed increase in the quantity of TeO2 on surfaces of these materials after passivation in KOH and NH4F. While CZT detector has wide commercial availability, it has more Te inclusions and grain boundary network compared to CZTS. CMT and CZTS have better crystal uniformity than CZT. The comparatively low presence of Te inclusions and grain boundary network in CZTS gives it a higher crystal growth yield for detector-grade material. 
    more » « less
  3. ; ; ; ; ; ; (, 2021 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC))
    Cadmium zinc telluride selenide (CdZnTeSe) has shown great promise in reducing the cost of semiconductor nuclear detectors that can operate at room temperature without cryogenic cooling. This is due to the high yield of detector-grade materials in the CdZnTeSe crystal growth process, which can be attributed to the much smaller numbers of Te inclusions and grain boundary network in CdZnTeSe compared to other CdTe-based semiconductors such as CdZnTe. In the present work, we study the effects of surface passivation on CdZnTe detectors using a mixture of ammonium fluoride and hydrogen peroxide solution (NH4F + H2O2 + H2O). Detectors fabricated from CdZnTeSe crystals showed very good energy resolutions: 1.1% for the 662-keV gamma peak of Cs-137 by Frisch-grid detectors, and 5.9% for the 59.6-keV gamma peak of Am-241 by planar detectors. Experimental results show that the leakage current is increased immediately after passivation and then decreases as the surfaces stabilizes. The resistivity of the CdZnTeSe is of the order of 10**10 Ω-cm. The surface passivation improved the energy resolution of planar detector by 18% for the 59.6-keV gamma peak of Am-241. 
    more » « less
  4. ; ; ; ; ; (, Physical Chemistry Chemical Physics)
    Two-dimensional transition metal dichalcogenides (2D-TMDs) have been proposed as novel optoelectronic materials for space applications due to their relatively light weight. MoS2 has been shown to have excellent semiconducting and photonic properties. Although the strong interaction of ionizing gamma radiation with bulk materials has been demonstrated, understanding its effect on atomically thin materials has scarcely been investigated. Here, we report the effect of gamma irradiation on the structural and electronic properties of a monolayer of MoS2. We perform Raman spectroscopy and X-ray photoelectron spectroscopy (XPS) studies of MoS2, before and after gamma ray irradiation with varying doses and density functional theory (DFT) calculations. The Raman spectra and XPS results demonstrate that point defects dominate after the gamma irradiation of MoS2. DFT calculations elucidate the electronic properties of MoS2 before and after irradiation. Our work makes several contributions to the field of 2D materials research. First, our study of the electronic density of states and the electronic properties of a MoS2 monolayer irradiated by gamma rays sheds light on the properties of a MoS2 monolayer under gamma irradiation. Second, our study confirms that point defects are formed as a result of gamma irradiation. And third, our DFT calculations qualitatively suggest that the conductivity of the MoS2 monolayer may increase after gamma irradiation due to the creation of additional defect states. 
    more » « less
  5. ; ; ; ; ; ; (, Advanced Optical Materials)
    Abstract Demonstrated are antimony‐based (Sb‐based) separate absorption and multiplication avalanche photodiodes (SAM‐APDs) for X‐ray and gamma‐ray detection, which are composed of GaSb absorbers and large bandgap AlAsSb multiplication regions in order to enhance the probability of stopping high‐energy photons while drastically suppressing the minority carrier diffusion. Well‐defined X‐ray and gamma‐ray photopeaks are observed under exposure to241Am radioactive sources, demonstrating the desirable energy‐sensitive detector performance. Spectroscopic characterizations show a significant improvement of measured energy resolution due to reduced high‐peak electric field in the absorbers and suppressed nonradiative recombination on surfaces. Additionally, the GaSb/AlAsSb SAM‐APDs clearly exhibit energy response linearity up to 59.5 keV with a minimum full‐width half‐maximum of 1.283 keV. A further analysis of the spectroscopic measurement suggests that the device performance is intrinsically limited by the noise from the readout electronics rather than that from the photodiodes. This study provides a first understanding of Sb‐based energy‐sensitive SAM‐APDs and paves the way to achieving efficient detection of high‐energy photons for X‐ray and gamma‐ray spectroscopy. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email