Workplace engineering problems are different from the problems that undergraduate engineering students typically encounter in most classroom settings. Students are most commonly given well-structured problems which have clear solution paths along with well-defined constraints and goals. This paper reports on research that examines how undergraduate engineering students perceived solving an ill-structured problem. Eighteen undergraduate civil engineering students were asked to solve an ill-structured engineering problem, and were interviewed after they completed solving the problem. This qualitative study is guided by the following research question: What factors do students perceive to influence their solving of an ill-structured civil engineering problem? Students’ responses to seven follow-up interview questions were transcribed and reviewed by research team members, which were used to develop codes and themes associated with these responses. Students’ transcripts were then coded following the developed codes. The analysis of data revealed that students were generally aware of the main positives and negatives of their proposed solutions to the ill-structured problem and reported that their creativity influenced their solutions and problem solving processes. Student responses also indicated that specific life events such as classes that they had taken, personal experiences, and exposure to other ill-structured problems during an internship helped them develop their proposed solution. Given students’ responses and overall findings, this supports creating learning environments for engineering students where they can support increasing their creativity and be more exposed to complex engineering problems.
more »
« less
The Affordance of Computer-Supportive Collaborative Learning in a Dynamics Course
Over the past two decades, educators have used computer-supported collaborative learning (CSCL) to integrate technology with pedagogy to improve student engagement and learning outcomes. Researchers have also explored the diverse affordances of CSCL, its contributions to engineering instruction, and its effectiveness in K-12 STEM education. However, the question of how students use CSCL resources in undergraduate engineering classrooms remains largely unexplored. This study examines the affordances of a CSCL environment utilized in a sophomore dynamics course with particular attention given to the undergraduate engineering students’ use of various CSCL resources. The resources include a course lecturebook, instructor office hours, a teaching assistant help room, online discussion board, peer collaboration, and demonstration videos. This qualitative study uses semi-structured interview data collected from nine mechanical engineering students (four women and five men) who were enrolled in a dynamics course at a large public research university in Eastern Canada. The interviews focused on the individual student’s perceptions of the school, faculty, students, engineering courses, and implemented CSCL learning environment. The thematic analysis was conducted to analyze the transcribed interviews using a qualitative data analysis software (Nvivo). The analysis followed a six step process: (1) reading interview transcripts multiple times and preliminary in vivo codes; (2) conducting open coding by coding interesting or salient features of the data; (3) collecting codes and searching for themes; (4) reviewing themes and creating a thematic map; (5) finalizing themes and their definitions; and (6) compiling findings. This study found that the students’ use of CSCL resources varied depending on the students’ personal preferences, as well as their perceptions of the given resource’s value and its potential to enhance their learning. For example, the dynamics lecturebook, which had been redesigned to encourage problem solving and note-taking, fostered student collaborative problem solving with their peers. In contrast, the professor’s example video solutions had much more of an influence on students’ independent problem-solving processes. The least frequently used resource was the course’s online discussion forum, which could be used as a means of communication. The findings reveal how computer-supported collaborative learning (CSCL) environments enable engineering students to engage in multiple learning opportunities with diverse and flexible resources to both address and to clarify their personal learning needs. This study strongly recommends engineering instructors adapt a CSCL environment for implementation in their own unique classroom context.
more »
« less
- Award ID(s):
- 1915574
- NSF-PAR ID:
- 10294619
- Date Published:
- Journal Name:
- Zone 1 Conference of the American Society for Engineering Education
- ISSN:
- 2332-368X
- Page Range / eLocation ID:
- https://peer.asee.org/37835
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
This is a research study that investigates the range of conceptions of prototyping in engineering design courses through exploring the conceptions and implementations from the instructors’ perspective. Prototyping is certainly an activity central to engineering design. The context of prototyping to support engineering education and practice has a range of implementations in an undergraduate engineering curriculum, from first-year engineering to capstone engineering design experiences. Understanding faculty conceptions’ of the reason, purpose, and place of prototyping can help illustrate how teaching and learning of the engineering design process is realistically implemented across a curriculum and how students are prepared for work practice. We seek to understand, and consequently improve, engineering design teaching and learning, through transformations of practice that are based on engineering education research. In this exploratory study, we interviewed three faculty members who teach engineering design in project-based learning courses across the curriculum of an undergraduate engineering program. This builds on related work done by the authors that previously investigated undergraduate engineering students’ conceptions of prototyping activities and process. With our instructor participants, a similar interview protocol was followed through semi-structured qualitative interviews. Data analysis has been undertaken through an emerging thematic analysis of these interview transcripts. Early findings characterize the focus on teaching the design process; the kind of feedback that the educators provide on students’ prototypes; students’ behavior while working on design projects; and educators’ perspectives on the design course. Understanding faculty conceptions with students’ conceptions of prototyping can shed light on the efficacy of using prototyping as an authentic experience in design teaching and learning. In project-based learning courses, particular issues of authenticity and assessment are under consideration, especially across the curriculum. More specifically, “proportions of problems” inform “problem solving” as one of the key characteristics in design thinking, teaching and learning. More attention to prototyping as part of the study of problem-solving processes can be useful to enhance understanding of the impact of instructional design. Challenges for teaching engineering design exist, and may be due to difficulties in framing design problems, recognizing what expertise students possess, and assessing their expertise to help them reach their goals, all at an appropriate place and ambiguity with student learning goals. Initial findings show that prototyping activities can help students become more reflective on their design. Scaffolded activities in prototyping can support self-regulated learning by students. The range of support and facilities, such as campus makerspaces, may also help students and instructors alike develop industry-ready engineering students.more » « less
-
null (Ed.)This research paper studies the challenges that mathematics faculty and graduate teaching assistants (GTAs) faced when moving active and collaborative calculus courses from in-person to virtual instruction. As part of a larger pedagogical change project (described below), the math department at a public Research-1 university began transitioning pre-calculus and calculus courses to an active and collaborative learning (ACL) format in Fall 2019. The change began with the introduction of collaborative worksheets in recitations which were led by GTAs and supported by undergraduate learning assistants (LAs). Students recitation periods collaboratively solving the worksheet problems on whiteboards. When COVID-19 forced the rapid transition to online teaching, these ACL efforts faced an array of challenges. Faculty and GTA reflections on the changes to teaching and learning provide insight into how instructional staff can be supported in implementing ACL across various modes of instruction. The calculus teaching change efforts discussed in this paper are part of an NSF-supported project that aims to make ACL the default method of instruction in highly enrolled gateway STEM courses across the institution. The theoretical framework for the project builds on existing work on grassroots change in higher education (Kezar and Lester, 2011) to study the effect of communities of practice on changing teaching culture. The project uses course-based communities of practice (Wenger, 1999) that include instructors, GTAs, and LAs working together to design and enact teaching change in the targeted courses alongside ongoing professional development for GTAs and LAs. Six faculty and five GTAs involved in the teaching change effort in mathematics were interviewed after the Spring 2020 semester ended. Interview questions focused on faculty and GTA experiences implementing active learning after the rapid transition to online teaching. A grounded coding scheme was used to identify common themes in the challenges faced by instructors and GTAs as they moved online and in the impacts of technology, LA support, and the department community of practice on the move to online teaching. Technology, including both access and capabilities, emerged as a common barrier to student engagement. A particular barrier was students’ reluctance to share video or participate orally in sessions that were being recorded, making group work more difficult than it had been in a physical classroom. In addition, most students lacked access to a tablet for freehand writing, presenting a significant hurdle for sharing mathematical notation when physical whiteboards were no longer an option. These challenges point to the importance of incorporating flexibility in active learning implementation and in the professional development that supports teaching changes toward active learning, since what is conceived for a collaborative physical classroom may be implemented in a much different environment. The full paper will present a detailed analysis of the data to better understand how faculty and GTA experiences in the transition to online delivery can inform planning and professional development as the larger institutional change effort moves forward both in mathematics and in other STEM fields.more » « less
-
null (Ed.)This complete research paper discusses how students’ feelings of inclusion change throughout their undergraduate career. Student responses acquired through focus groups and one-on-one interviews were examined to determine how included the students felt in their engineering college and also the broader scientific community. A small group of non-calculus ready engineering students enrolled in a large land grant institution in the Mid-Atlantic region consented to participate in the study. The student cohort participated in an NSF S-STEM funded program aimed at fostering a sense of inclusion in engineering by implementing a curriculum focused on cohort formation, career exploration, and professional development. The AcES, consisting of a weeklong pre-fall bridge experience, two common courses, and a variety of co-curricular activities, has been operating for eight years. Students who receive S-STEM funded scholarships participate in three focus groups and two one-on-one interviews each semester throughout their undergraduate studies. Student responses from the one-on-one interviews and focus groups conducted from 2017-2020 were examined with qualitative coding methods. Questions examined in this work include: 1) Did the engineering in history course help make you feel like you belong in engineering at WVU and that you are included in engineering at WVU?, 2) Do you feel part of the group when working on projects in your engineering courses?, 3) Do you consider yourself a member of the scientific and engineering community here at WVU? Why or why not, and 4) Do you consider yourself a member of the broader scientific and engineering community? During the exploratory coding phase three codes were established to represent the degree of inclusion felt by students: Edge of Inclusion, Slight Inclusion, and Feelings of Inclusion. Edge of Inclusion was characterized by student responses such as “almost there but not totally”, “just starting to be”, and “no, well maybe a bit” while student responses such as “yes, but only a little” and “in some classes or situations” were recognized as Slight Inclusion. Examples of student responses such as “yes, I do feel part of it”, “absolutely, since I’ve…”, and “I would consider myself part of . . .” were classified with the code Feelings of Inclusion. Since the sample size was limited by scholarship funding, statistically significant results weren’t obtainable, but clear themes emerged that can be used to influence engineering curricula and serve as justification for an expanded study. Participating in an internship emerged as a major contributor to students feeling included in the broader scientific community. Interestingly, a decrease in the average degree of inclusion occurred after the students’ first semester, prior to increasing in later semesters. It is hypothesized that the emphasis on cohort formation, career exploration, and planned co-curricular activities during the first semester in the AcES program bolstered the initial feelings of inclusion. A student’s feeling of inclusion is known to be a contributing factor in retention. The findings of this research indicate that internships should not only be strongly encouraged, but university resources should be invested in helping students be prepared for, apply to, and obtain internships. The researchers suggest the study be expanded beyond the AcES program to examine a broader sample and greater number of students.more » « less
-
Engineering education researchers and practitioners have driven instructional innovation in undergraduate engineering instruction. Much of the research about educational innovation has focused on undergraduate classrooms in large enrollment courses and/or research-intensive institutions. Propagation of innovations across settings, especially those quite unlike the original context, has received less attention in the literature. This includes liberal arts institutions, which collectively educate a large number of undergraduate engineering students in various contexts. Therefore, this study focuses on the implementation of an instructional innovation in a liberal arts institution that started a new engineering program to educate a regional engineering workforce. This qualitative study documented the experiences of one engineering instructor who adopted and adapted a blended learning environment for undergraduate dynamics designed to promote active and collaborative learning in undergraduate engineering courses. We analyzed interviews, documents, artifacts, visual materials, and field notes to examine the propagation of the instructional system in context with cultural features in local institution settings. Our findings show how an engineering instructor orchestrated a culture-aligned adoption and adaptation of an instructional innovation. Using reflective practice, the research participant adapted the implemented innovative instruction to their hands-on institution culture, such as adjusting expectations in content, adapting resources to students’ individual needs, adjusting uncertainty of problem solving, and adapting to a hands-on institution culture. This research highlights the important role of institutional culture in local adaptations of educational innovations, and it provides the community with an expanded way to think about innovation propagation.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Paper:
- The DOI is not currently available.
