Wildfires emit mixtures of light‐absorbing aerosols (including black and brown carbon, BC and BrC, respectively) and more purely scattering organic aerosol (OA). BC, BrC, and OA interactions are complex and dynamic and evolve with aging in the atmosphere resulting in large uncertainties in their radiative forcing. We report microphysical, optical, and chemical measurements of multiple plumes from the Woodbury Fire (AZ, USA) observed at Los Alamos, NM, after 11–18 hr of atmospheric transit. This includes periods where the plumes exhibited little entrainment as well as periods that had become more dilute after mixing with background aerosol. Aerosol mass absorption cross sections (MAC) were enhanced by a factor of 1.5–2.2 greater than bare BC at 870 nm, suggesting lensing by nonabsorbing coatings following a core‐shell morphology. Larger MAC enhancement factors of 1.9–5.1 at 450 nm are greater than core‐shell morphology can explain and are attributed to BrC. MAC of OA (MACOrg) at 450 nm was largest in intact portions of the plumes (peak value bounded between 0.6 and 0.9 m2/g [Org]) and decreased with plume dilution. We report a strong correlation between MACOrg(450 nm) with the fC2H4O2(a tracer for levoglucosan‐like species) of coatings and of bulk OA indicating that BrC in the Woodbury Fire was coemitted with levoglucosan, a primary aerosol. fC2H4O2and MACOrg(450 nm) are shown to vary between the edge and the core of plumes, demonstrating enhanced oxidation of OA and BrC bleaching near plume edges. Our process‐level finding can inform parameterizations of mixed BC, BrC, and OA properties for wildfire plumes in climate models.
Diel cycle impacts on the chemical and light absorption properties of organic carbon aerosol from wildfires in the western United States
Abstract. Organic aerosol (OA) emissions from biomass burning havebeen the subject of intense research in recent years, involving acombination of field campaigns and laboratory studies. These efforts haveaimed at improving our limited understanding of the diverse processes andpathways involved in the atmospheric processing and evolution of OAproperties, culminating in their accurate parameterizations in climate andchemical transport models. To bring closure between laboratory and fieldstudies, wildfire plumes in the western United States were sampled andcharacterized for their chemical and optical properties during theground-based segment of the 2019 Fire Influence on Regional to GlobalEnvironments and Air Quality (FIREX-AQ) field campaign. Using acustom-developed multiwavelength integrated photoacoustic-nephelometerspectrometer in conjunction with a suite of instruments, including anoxidation flow reactor equipped to generate hydroxyl (OH⚫) ornitrate (NO3⚫) radicals to mimic daytime or nighttimeoxidative aging processes, we investigated the effects of multipleequivalent hours of OH⚫ or NO3⚫ exposure onthe chemical composition and mass absorption cross-sections (MAC(λ)) at 488 and 561 nm of OA emitted from wildfires in Arizona and Oregon. Wefound that OH⚫ exposure induced a slight initial increase inabsorption corresponding to short timescales; however, at longer timescales, the wavelength-dependent MAC(λ) decreased by a factor of0.72 ± 0.08, consistent with previous laboratory studies and reportsof photobleaching. On the other hand, NO3⚫ exposure increasedMAC(λ) by a factor of up to 1.69 ± 0.38. We also noted somesensitivity of aerosol aging to different fire conditions between Arizonaand Oregon. The MAC(λ) enhancement following NO3⚫ exposure was found to correlate with an enhancement in CHO1N andCHOgt1N ion families measured by an Aerodyne aerosol mass spectrometer.
more »
« less
- NSF-PAR ID:
- 10295268
- Date Published:
- Journal Name:
- Atmospheric Chemistry and Physics
- Volume:
- 21
- Issue:
- 15
- ISSN:
- 1680-7324
- Page Range / eLocation ID:
- 11843 to 11856
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract -
more » « less
Abstract After smoke from burning biomass is emitted into the atmosphere, chemical and physical processes change the composition and amount of organic aerosol present in the aged, diluted plume. During the fourth Fire Lab at Missoula Experiment, we performed smog‐chamber experiments to investigate formation of secondary organic aerosol (SOA) and multiphase oxidation of primary organic aerosol (POA). We simulated atmospheric aging of diluted smoke from a variety of biomass fuels while measuring particle composition using high‐resolution aerosol mass spectrometry. We quantified SOA formation using a tracer ion for low‐volatility POA as a reference standard (akin to a naturally occurring internal standard). These smoke aging experiments revealed variable organic aerosol (OA) enhancements, even for smoke from similar fuels and aging mechanisms. This variable OA enhancement correlated well with measured differences in the amounts of emitted volatile organic compounds (VOCs) that could subsequently be oxidized to form SOA. For some aging experiments, we were able to predict the SOA production to within a factor of 2 using a fuel‐specific VOC emission inventory that was scaled by burn‐specific toluene measurements. For fires of coniferous fuels that were dominated by needle burning, volatile biogenic compounds were the dominant precursor class. For wiregrass fires, furans were the dominant SOA precursors. We used a POA tracer ion to calculate the amount of mass lost due to gas‐phase oxidation and subsequent volatilization of semivolatile POA. Less than 5% of the POA mass was lost via multiphase oxidation‐driven evaporation during up to 2 hr of equivalent atmospheric oxidation.
-
Abstract. Oxidation flow reactors (OFRs) are an emerging tool for studying the formation and oxidative aging of organic aerosols and other applications.The majority of OFR studies to date have involved the generation of the hydroxyl radical (OH) to mimic daytime oxidative aging processes.In contrast, the use of the nitrate radical (NO3) in modern OFRs to mimic nighttime oxidative aging processes has been limited due to the complexity of conventional techniques that are used to generate NO3.Here, we present a new method that uses a laminar flow reactor (LFR) to continuously generate dinitrogen pentoxide (N2O5) in the gas phase at room temperature from the NO2 + O3 and NO2 + NO3 reactions.The N2O5 is then injected into a dark Potential Aerosol Mass (PAM) OFR and decomposes to generate NO3; hereafter, this method is referred to as “OFR-iN2O5” (where “i” stands for “injected”).To assess the applicability of the OFR-iN2O5 method towards different chemical systems, we present experimental and model characterization of the integrated NO3 exposure, NO3:O3, NO2:NO3, and NO2:O2 as a function of LFR and OFR conditions.These parameters were used to investigate the fate of representative organic peroxy radicals (RO2) and aromatic alkyl radicals generated from volatile organic compound (VOC) + NO3 reactions, and VOCs that are reactive towards both O3 and NO3.Finally, we demonstrate the OFR-iN2O5 method by generating and characterizing secondary organic aerosol from the β-pinene + NO3 reaction.more » « less
-
Wildfires are an important atmospheric source of primary organic aerosol (POA) and precursors for secondary organic aerosol (SOA) at regional and global scales. However, there are large uncertainties surrounding the emissions and physicochemical processes that control the transformation, evolution, and properties of POA and SOA in large wildfire plumes. We develop a plume version of a kinetic model to simulate the dilution, oxidation chemistry, thermodynamic properties, and microphysics of organic aerosol (OA) in wildfire smoke. The model is applied to study the in-plume OA in four large wildfire smoke plumes intercepted during an aircraft-based field campaign in summer 2018 in the western United States. Based on estimates of dilution and oxidant concentrations before the aircraft first intercepted the plumes, we simulate the OA evolution from very close to the fire to several hours downwind. Our model results and sensitivity simulations suggest that dilution-driven evaporation of POA and simultaneous photochemical production of SOA are likely to explain the observed evolution in OA mass with physical age. The model, however, substantially underestimates the change in the oxygen-to-carbon ratio of the OA compared to measurements. In addition, we show that the rapid chemical transformation within the first hour after emission is driven by higher-than-ambient OH concentrations (3×10 6 -10 7 molecules cm -3 ) and the slower evolution over the next several hours is a result of lower-than-ambient OH concentrations (<10 6 molecules cm -3 ) and depleted SOA precursors. Model predictions indicate that the OA measured several hours downwind of the fire is still dominated by POA but with an SOA fraction that varies between 30% and 56% of the total OA. Semivolatile, heterocyclic, and oxygenated aromatic compounds, in that order, were found to contribute substantially (>90%) to SOA formation. Future work needs to focus on better understanding the dynamic evolution closer to the fire and resolving the rapid change in the oxidation state of OA with physical age.more » « less
-
Abstract. Acid-catalyzed multiphase chemistry of epoxydiols formed from isopreneoxidation yields the most abundant organosulfates (i.e., methyltetrolsulfates) detected in atmospheric fine aerosols in the boundary layer. Thispotentially determines the physicochemical properties of fine aerosols inisoprene-rich regions. However, chemical stability of these organosulfatesremains unclear. As a result, we investigate the heterogeneous oxidation ofaerosols consisting of potassium 3-methyltetrol sulfate ester(C5H11SO7K) by gas-phase hydroxyl (OH) radicals at a relativehumidity (RH) of 70.8 %. Real-time molecular composition of the aerosolsis obtained by using a Direct Analysis in Real Time (DART) ionization sourcecoupled to a high-resolution mass spectrometer. Aerosol mass spectra revealthat 3-methyltetrol sulfate ester can be detected as its anionic form(C5H11SO7-) via direct ionization in the negativeionization mode. Kinetic measurements reveal that the effective heterogeneousOH rate constant is measured to be 4.74±0.2×10-13 cm3 molecule−1 s−1 with a chemical lifetime against OHoxidation of 16.2±0.3 days, assuming an OH radical concentration of1.5×106 molecules cm−3. Comparison of this lifetime withthose against other aerosol removal processes, such as dry and wetdeposition, suggests that 3-methyltetrol sulfate ester is likely to bechemically stable over atmospheric timescales. Aerosol mass spectra only showan increase in the intensity of bisulfate ion (HSO4-) afteroxidation, suggesting the importance of fragmentation processes. Overall,potassium 3-methyltetrol sulfate ester likely decomposes to form volatilefragmentation products and aqueous-phase sulfate radial anion(SO4⚫-). SO4⚫- subsequently undergoesintermolecular hydrogen abstraction to form HSO4-. These processesappear to explain the compositional evolution of 3-methyltetrol sulfate esterduring heterogeneous OH oxidation.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.5194/acp-21-11843-2021
