Single-crystal calcium fluorite (CaF2) is widely used for transmissive optics in ultraviolet and vacuum ultraviolet (UV and VUV) wavelength applications because of its exceptional transmission performance. Generally, products using CaF2 are manufactured through finishing processes such as chemo-mechanical polishing (CMP), magnetorheological finishing (MRF) or ion-beam figuring (IBF) after performing precision cutting and grinding processes for profiling. However, CaF2 is known as a brittle material with high anisotropy, and subsurface damage is induced by each cutting process. But, the effects of surface integrity on the optical and functional performance of precision machined CaF2 has not been reported yet. In this research, a newly developed multiaxial adjustment system that can precisely align specimens is used in single-axis orthogonal cutting experiments with zero degree and negative rake angle diamond radius tools to prevent pre-machining and thus pre-damaging of single-crystal CaF2 specimens. Cutting forces evaluation via piezoelectric dynamometer acquisition as well as surface analysis by atomic force microscopy and white light microscopy has been performed. Finally, smooth surfaces due to ductile material removal mechanisms could be determined on all machined specimen surfaces.
more »
« less
Ultra-Precision Machining: Cutting With Diamond Tools
Abstract This article is written as a tribute to Professor Frederick Fongsun Ling 1927–2014. Single-point diamond machining, a subset of a broader class of processes characterized as ultraprecision machining, is used for the creation of surfaces and components with nanometer scale surface roughnesses, and submicrometer scale geometrical form accuracies. Its initial development centered mainly on the machining of optics for energy and defense related needs. Today, diamond machining has broad applications that include the manufacture of precision freeform optics for defense and commercial applications, the structuring of surfaces for functional performance, and the creation of molds used for the replication of a broad range of components in plastic or glass. The present work focuses on a brief review of the technology. First addressed is the state of current understanding of the mechanics that govern the process including the resulting forces, energies and the size effect, forces when cutting single crystals, and resulting cutting temperatures. Efforts to model the process are then described. The workpiece material response when cutting ductile and brittle materials is also included. Then the present state of the art in machine tools, diamond tools and tool development, various cutting configurations used, and some examples of diamond machined surfaces and components are presented. A discussion on the measurement of surface topography, geometrical form, and subsurface damage of diamond machined surfaces is also included.
more »
« less
- Award ID(s):
- 1727244
- NSF-PAR ID:
- 10296424
- Date Published:
- Journal Name:
- Journal of Manufacturing Science and Engineering
- Volume:
- 142
- Issue:
- 11
- ISSN:
- 1087-1357
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Single crystal calcium fluoride (CaF2) is widely used for transmissive optics in the ultraviolet and vacuum ultraviolet (UV and VUV) spectral regions because of its high optical transmission. Optical components made of CaF2 are usually manufactured by precision machining to generate high quality surfaces with low surface roughness. However, the influence of the clamping technique on the resulting surface roughness of diamond machined CaF2 has not been reported. In this research, two clamping techniques, vacuum clamping and gluing with wax, are used in off-axis diamond turning experiments with zero degree and negative rake angle diamond tools. Surface characterization by white light interferometry and atomic force microscopy show surfaces with low surface roughness. Furthermore, a significant influence of the clamping technique on the generated surface topography is observed.more » « less
-
Abstract Single crystal Ge is a semiconductor that has broad applications, especially in manipulation of infrared light. Diamond machining enables the efficient production of surfaces with tolerances required by the optical industry. During machining of anisotropic single crystals, the cutting direction with respect to the in-plane lattice orientation plays a fundamental role in the final quality of the surface and subsurface. In this study, on-axis face turning experiments were performed on an undoped (111)Ge wafer to investigate the effects of crystal anisotropy and feedrate on the surface and subsurface conditions. Atomic force microscopy and scanning white light interferometry were used to characterize the presence of brittle fracture on the machined surfaces and to evaluate the resultant surface roughness. Raman spectroscopy was performed to evaluate the residual stresses and lattice disorder induced by the tool during machining. Nanoindentation with Berkovich and cube corner indenter tips was performed to evaluate elastic modulus, hardness, and fracture toughness of the machined surfaces and to study their variations with feedrate and cutting direction. Post-indentation studies of selected indentations were also performed to characterize the corresponding quasi-plasticity mechanisms. It was found that an increase of feedrate produced a rotation of the resultant force imparted by the tool indicating a shift from indentation-dominant to cutting-dominant behavior. Fracture increased with the feedrate and showed a higher propensity when the cutting direction belonged to the <112¯> family.more » « less
-
Precision glass molding is a viable process for the cost-effective volume production of freeform optics. Process development is complex, requiring iterative trials of mold manufacture and metrology, glass mold prototyping, metrology and functional testing. This paper describes the first iteration in the development of a process for an Alvarez lens for visible light. The challenges of this optic are extremely tight band-RMS tolerances on a freeform shape over a maximum clear aperture of 45 mm, a 16:1 aspect ratio and a freeform departure of 329 micrometers. A freeform glass mold for an Alvarez lens was manufactured by coordinated-axis diamond turning in a mold substrate using a custom tool error correction method. The results of prototype precision glass molding are also reported. Mold surfaces and molded optical surfaces are analyzed with scanning white light interferometry. A surface roughness of approximately 3 nm RMS is obtained for both the mold substrate and the glass optic with high-fidelity reproduction of micro-surface structure in the glass. These measurements also identify challenging areas, particularly the presence of mid-spatial frequency errors on the optic originating from the machine thermal control system. The form of the molds was also measured with a profilometer; however, the mold surface does not agree with the expected prescription with an overall deviation in form of approximately 10 μm. The machining process is expected to have sub-micrometer error and the sources of this discrepancy are still being determined. Metrology of the glass optics is currently in progress.more » « less
-
Abstract Shear-based deformation processing by hybrid cutting-extrusion and free machining are used to make continuous strip, of thickness up to 1 mm, from low-workability AA6013-T6 in a single deformation step. The intense shear can impose effective strains as large as 2 in the strip without pre-heating of the workpiece. The creation of strip in a single step is facilitated by three factors inherent to the cutting deformation zone: highly confined shear deformation, in situ plastic deformation-induced heating, and high hydrostatic pressure. The hybrid cutting-extrusion, which employs a second die located across from the primary cutting tool to constrain the chip geometry, is found to produce strip with smooth surfaces (Sa < 0.4 μm) that is similar to cold-rolled strip. The strips show an elongated grain microstructure that is inclined to the strip surfaces—a shear texture—that is quite different from rolled sheet. This shear texture (inclination) angle is determined by the deformation path. Through control of the deformation parameters such as strain and temperature, a range of microstructures and strengths could be achieved in the strip. When the cutting-based deformation was done at room temperature, without workpiece preheating, the starting T6 material was further strengthened by as much as 30% in a single step. In elevated-temperature cutting-extrusion, dynamic recrystallization was observed, resulting in a refined grain size in the strip. Implications for deformation processing of age-hardenable Al alloys into sheet form, and microstructure control therein, are discussed.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1115/1.4048194
