An official website of the United States government
Although the average healthy adult transitions from sit to stand over 60 times per day, most research on powered prosthesis control has only focused on walking. In this paper, we present a data-driven controller that enables sitting, standing, and walking with minimal tuning. Our controller comprises two high level modes of sit/stand and walking, and we develop heuristic biomechanical rules to control transitions. We use a phase variable based on the user's thigh angle to parameterize both walking and sit/stand motions, and use variable impedance control during ground contact and position control during swing. We extend previous work on data-driven optimization of continuous impedance parameter functions to design the sit/stand control mode using able-bodied data. Experiments with a powered knee-ankle prosthesis used by a participant with above-knee amputation demonstrate promise in clinical outcomes, as well as trade-offs between our minimal-tuning approach and accommodation of user preferences. Specifically, our controller enabled the participant to complete the sit/stand task 20% faster and reduced average asymmetry by half compared to his everyday passive prosthesis. The controller also facilitated a timed up and go test involving sitting, standing, walking, and turning, with only a mild (10%) decrease in speed compared to the everyday prosthesis. Our sit/stand/walk controller enables multiple activities of daily life with minimal tuning and mode switching.
more »
« less
Cognitive measures during walking with and without lower-limb prosthesis: protocol for a scoping review
Introduction Tuning of lower-limb (LL) robotic prosthesis control is necessary to provide personalised assistance to each human wearer during walking. Prostheses wearers’ adaptation processes are subjective and the efficiency largely depends on one’s mental processes. Therefore, beyond physical motor performance, prosthesis personalisation should consider the wearer’s preference and cognitive performance during walking. As a first step, it is necessary to examine the current measures of cognitive performance when a wearer walks with an LL prosthesis, identify the gaps and methodological considerations, and explore additional measures in a walking setting. In this protocol, we outlined a scoping review that will systematically summarise and evaluate the measures of cognitive performance during walking with and without LL prosthesis. Methods and analysis The review process will be guided and documented by CADIMA, an open-access online data management portal for evidence synthesis. Keyword searches will be conducted in seven databases (Web of Science, MEDLINE, BIOSIS, SciELO Citation Index, ProQuest, CINAHL and PsycINFO) up to 2020 supplemented with grey literature searches. Retrieved records will be screened by at least two independent reviewers on the title-and-abstract level and then the full-text level. Selected studies will be evaluated for reporting bias. Data on sample characteristics, type of cognitive function, characteristics of cognitive measures, task prioritisation, experimental design and walking setting will be extracted. Ethics and dissemination This scoping review will evaluate the measures used in previously published studies thus does not require ethical approval. The results will contribute to the advancement of prosthesis tuning processes by reviewing the application status of cognitive measures during walking with and without prosthesis and laying the foundation for developing needed measures for cognitive assessment during walking. The results will be disseminated through conferences and journals.
more »
« less
- Award ID(s):
- 1926998
- PAR ID:
- 10296828
- Date Published:
- Journal Name:
- BMJ Open
- Volume:
- 11
- Issue:
- 2
- ISSN:
- 2044-6055
- Page Range / eLocation ID:
- e039975
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Passive trunk exoskeletons support the human body with mechanical elements like springs and trunk compression, allowing them to guide motion and relieve the load on the spine. However, to provide appropriate support, elements of the exoskeleton (e.g., degree of compression) should be intelligently adapted to the current task. As it is not currently clear how adjusting different exoskeleton elements affects the wearer, this study preliminarily examines the effects of simultaneously adjusting both exoskeletal spinal column stiffness and trunk compression in a passive trunk exoskeleton. Six participants performed four dynamic tasks (walking, sit-to-stand, lifting a 20-lb box, lifting a 40-lb box) and experienced unexpected perturbations both without the exoskeleton and in six exoskeleton configurations corresponding to two compression levels and three stiffness levels. While results are preliminary due to the small sample size and relatively small increases in stiffness, they indicate that both compression and stiffness may affect kinematics and electromyography, that the effects may differ between activities, and that there may be interaction effects between stiffness and compression. As the next step, we will conduct a larger study with the same protocol more participants and larger stiffness increases to systematically evaluate the effects of different exoskeleton characteristics on the wearer.Clinical Relevance- Trunk exoskeletons can support wearers during a variety of different tasks, but their configuration may need to be intelligently adjusted to provide appropriate support. This pilot study provides information about the effects of exoskeleton back stiffness and trunk compression on the wearer, which can be used as a basis for more effective device design and usage.more » « less
-
Background:Mild cognitive impairment (MCI) can be an early sign of Alzheimer’s disease and other types of dementia detectable through gait analysis. Curve walking, which demands greater cognitive and motor skills, may be more sensitive in MCI detection than straight walking. However, few studies have compared gait performance in older adults with and without MCI in these conditions. Objective:To compare the capability of curve and straight walking tests for the detection of MCI among older adults. Methods:We employed a Kinect v.2 camera to record the gait of 55 older adults (30 healthy controls, 25 with MCI) during single-task straight and curve walking tests. We examined 50 gait markers and conducted statistical analyses to compare groups and conditions. The trail was approved with protocol No. IR.SEMUMS.REC.1398.237 by the ethics committee of Semnan University of Medical Sciences in Iran. Results:Older adults with MCI exhibited more compromised gait performance, particularly during curve walking. Curve walking outperformed straight walking in MCI detection, with several gait markers showing significant differences between healthy controls and MCI patients. These markers encompass average velocity, cadence, temporal markers (e.g., gait cycle subphase durations), spatial markers (e.g., foot position changes during gait subphases), and spatiotemporal markers (e.g., step and stride velocities). Conclusions:Our study suggests curve walking as a more informative and challenging test for MCI detection among older adults, facilitating early diagnosis using non-invasive, cost-effective tools like the Kinect v.2 camera, complementing cognitive assessments in early diagnosis, and tracking MCI progression to dementia.more » « less
-
The rise of complex AI systems in healthcare and other sectors has led to a growing area of research called Explainable AI (XAI) designed to increase transparency. In this area, quantitative and qualitative studies focus on improving user trust and task performance by providing system- and prediction-level XAI features. We analyze stakeholder engagement events (interviews and workshops) on the use of AI for kidney transplantation. From this we identify themes which we use to frame a scoping literature review on current XAI features. The stakeholder engagement process lasted over nine months covering three stakeholder group's workflows, determining where AI could intervene and assessing a mock XAI decision support system. Based on the stakeholder engagement, we identify four major themes relevant to designing XAI systems – 1) use of AI predictions, 2) information included in AI predictions, 3) personalization of AI predictions for individual differences, and 4) customizing AI predictions for specific cases. Using these themes, our scoping literature review finds that providing AI predictions before, during, or after decision-making could be beneficial depending on the complexity of the stakeholder's task. Additionally, expert stakeholders like surgeons prefer minimal to no XAI features, AI prediction, and uncertainty estimates for easy use cases. However, almost all stakeholders prefer to have optional XAI features to review when needed, especially in hard-to-predict cases. The literature also suggests that providing both system and prediction-level information is necessary to build the user's mental model of the system appropriately. Although XAI features improve users' trust in the system, human-AI team performance is not always enhanced. Overall, stakeholders prefer to have agency over the XAI interface to control the level of information based on their needs and task complexity. We conclude with suggestions for future research, especially on customizing XAI features based on preferences and tasks.more » « less
-
Measurement of prosthesis structural load, as an important way to quantify the interaction of the amputee user with the environment, may serve important purposes in the control of smart lower-limb prosthetic devices. However, the majority of existing force sensors used in protheses are developed based on strain measurement and thus may suffer from multiple issues such as weak signals and signal drifting. To address these limitations, this paper presents a novel Force-Moment Prosthesis Load Sensor (FM-PLS) to measure the axial force and bending moment in the structure of a lower-limb prosthesis. Unlike strain gauge-based force sensors, the FM-PLS is developed based on the magnetic sensing of small (millimeter-scale) deflection of an elastic element, and it may provide stronger signals that are more robust against interferences and drifting since such physical deflection is several orders of magnitude greater than the strain of a typical load-bearing structure. The design of the sensor incorporates uniquely curved supporting surfaces such that the measurement is sensitive to light load but the sensor structure is robust enough to withstand heavy load without damage. To validate the sensor performance, benchtop testing of the FM-PLS and walking experiments of a FM-PLS-embedded robotic lower-limb prosthesis were conducted. Benchtop testing results displayed good linearity and a good match to the numerical simulation results. Results from the prosthesis walking experiments showed that the sensor signals can be used to detect important gaits events such as heel strike and toe-off, facilitating the reliable motion control of lower-limb prostheses.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1136/bmjopen-2020-039975
