An official website of the United States government
Abstract A mechanochromic, programmable, cholesteric liquid crystalline elastomer (CLCE) is fabricated, and after straining, resulting in a blue shift through the visible spectrum, is returned to its initial shape and color upon heating through its isotropic phase transition. Light initiated, radical‐mediated, addition fragmentation chain transfer (AFT), facilitate permanent programming or erasure of thermoreversible shape and color by relaxing stress imparted on the strained network through reversible bond exchange. Thermoreversible strain is coupled with reversible color change and can be made permanent at any desired strain by light exposure and corresponding AFT activation, temporarily restoring nearly initial shape and color upon heating. The optical characteristics and photonic structure, inherently linked to the network, are measured as a function of strain, to confirm the reflection notch narrowing indicating that prepolymerization alignment via shearing is poor thereby causing a broad spectrum of reflected light that narrows when the material is stretched. Beyond programming a new shape and color, the reflection notch is erased and separately, photopatterned to achieve dynamic color schemes that are toggled with heating and cooling, similar to that of a chameleon's camouflaging technique that has the ability to manipulate multiple colors in a single material, also with use for strain mapping.
more »
« less
Permanent and reversibly programmable shapes in liquid crystal elastomer microparticles capable of shape switching
Reversibly programmable liquid crystal elastomer microparticles (LCEMPs), formed as a covalent adaptable network (CAN), with an average diameter of 7 μm ± 2 μm, were synthesized via a thiol-Michael dispersion polymerization. The particles were programmed to a prolate shape via a photoinitiated addition–fragmentation chain-transfer (AFT) exchange reaction by activating the AFT after undergoing compression. Due to the thermotropic nature of the AFT-LCEMPs, shape switching was driven by heating the particles above their nematic–isotropic phase transition temperature ( T NI ). The programmed particles subsequently displayed cyclable two-way shape switching from prolate to spherical when at low or high temperatures, respectively. Furthermore, the shape programming is reversible, and a second programming step was done to erase the prolate shape by initiating AFT at high temperature while the particles were in their spherical shape. Upon cooling, the particles remained spherical until additional programming steps were taken. Particles were also programmed to maintain a permanent oblate shape. Additionally, the particle surface was programmed with a diffraction grating, demonstrating programmable complex surface topography via AFT activation.
more »
« less
- Award ID(s):
- 1809841
- PAR ID:
- 10300597
- Date Published:
- Journal Name:
- Soft Matter
- Volume:
- 17
- Issue:
- 3
- ISSN:
- 1744-683X
- Page Range / eLocation ID:
- 467 to 474
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Inertial migration of spherical particles has been investigated extensively using experiments, theory, and computational modeling. Yet, a systematic investigation of the effect of particle shape on inertial migration is still lacking. Herein, we numerically mapped the migration dynamics of a prolate particle in a straight rectangular microchannel using smoothed particle hydrodynamics at moderate Reynolds number flows. After validation, we applied our model to 2:1 and 3:1 shape aspect ratio particles at multiple confinement ratios. Their effects on the final focusing position, rotational behavior, and transitional dynamics were studied. In addition to the commonly reported tumbling motion, for the first time, we identified a new logrolling behavior of a prolate ellipsoidal particle in the confined channel. This new behavior occurs when the confinement ratio is above an approximate threshold value of K = 0.72. Our microfluidic experiments using cell aggregates with similar shape aspect ratio and confinement ratio confirmed this new predicted logrolling motion. We also found that the same particle can undergo different rotational modes, including kayaking behavior, depending on its initial cross-sectional position and orientation. Furthermore, we examined the migration speed, angular velocity, and rotation period as well as their dependence on both particle shape aspect ratio and confinement ratio. Our findings are especially relevant to the applications where particle shape and alignment are used for sorting and analysis, such as the use of barcoded particles for biochemical assays through optical reading, or the shape-based enrichment of microalgae, bacteria, and chromosomes.more » « less
-
Abstract The anisotropy in the shape of polymeric particles has been demonstrated to have many advantages over spherical particulates, including bio‐mimetic behavior, shaped‐directed flow, deformation, surface adhesion, targeting, motion, and permeability. The layer‐by‐layer (LbL) assembly is uniquely suited for synthesizing anisotropic particles as this method allows for simple and versatile replication of diverse colloid geometries with precise control over their chemical and physical properties. This review highlights recent progress in anisotropic particles of micrometer and nanometer sizes produced by a templated multilayer assembly of synthetic and biological macromolecules. Synthetic approaches to produce capsules and hydrogels utilizing anisotropic templates such as biological, polymeric, bulk hydrogel, inorganic colloids, and metal–organic framework crystals as sacrificial templates are overviewed. Structure‐property relationships controlled by the anisotropy in particle shape and surface are discussed and compared with their spherical counterparts. Advances and challenges in controlling particle properties through varying shape anisotropy and surface asymmetry are outlined. The perspective applications of anisotropic colloids in biomedicine, including programmed behavior in the blood and tissues as artificial cells, nano‐motors/sensors, and intelligent drug carriers are also discussed.more » « less
-
Inertial migration of spherical particles has been investigated extensively using experiments, theory, and computational modeling. Yet, a systematic investigation of the effect of particle shape on inertial migration is still lacking. Herein, we numerically mapped the migration dynamics of a prolate particle in a straight rectangular microchannel using smoothed particles hydrodynamics (SPH). For the first time, we identified a new logrolling behavior of a prolate ellipsoidal particle in the confined channel. Our findings are especially relevant to the applications where particle shape and alignment are used for sorting and analysis, such as shape-based enrichment of microalgae, bacteria, and chromosomes.more » « less
-
Egolfopoulos, Fokion (Ed.)Powdered iron is being investigated for its potential use as a carbon-free fuel due to its ability to burn heterogeneously and produce oxide particles, which can be collected, reduced back to iron and burned again. However, high temperature oxidation of iron particles can induce partial vaporization/decomposition and evolution of nanometric iron oxide particles. To investigate the formation process of nanoparticles in iron combustion, iron powders (consisting of spheroidal 45–53 μm particles) were injected in an electrically-heated drop tube furnace, operated at a maximum gas temperature of 1375 K, where they experienced high heating rates (104 K/s). The particles reacted with oxygen at concentrations of 15, 21, 35, 50 and 100 % by volume in nitrogen diluent gas. Particles ignited and burned brightly, with peak temperatures reaching 2344–2884 K, depending on the oxygen concentration. The observed distribution of the combustion products of iron was bimodal in size and composition, containing (a) dark gray spherical micrometric particles bigger than their iron particle precursors composed of both magnetite and hematite, and (b) highly agglomerated orange-reddish nanometric particles composed of hematite. The mass fraction of nanometric particles accounted for up to 1.7–7.4 % of the collected products, increasing with the oxygen partial pressure. The nanometric particles were spherules, 30–100 nm in diameter. However, they were highly agglomerated with aggregate aerodynamic diameters peaking at 180–560 nm. The yield of nanoparticles increased with increasing oxygen concentration in the furnace. A heuristic model was used to investigate the impact and sensitivity of various strategies for modeling evaporation, aiming to identify key mechanisms that limit the evaporation rate. This study highlights that understanding the type of liquid at the particle surface is crucial, as evaporation can increase significantly with a homogeneous liquid Fe-O particle compared to a core–shell morphology. Additionally, the analysis suggests that evaporation likely occurs in an intermediate regime where gaseous Fe-containing species oxidize in the boundary layer. Understanding these boundary layer processes is essential for accurately modeling the evaporation rate while maintaining computational efficiency. 1.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1039/d0sm01836h
