skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


  • NSF Public Access
  • Search Results
  • Reconfigurable and Spatially Programmable Chameleon Skin‐Like Material Utilizing Light Responsive Covalent Adaptable Cholesteric Liquid Crystal Elastomers
Title: Reconfigurable and Spatially Programmable Chameleon Skin‐Like Material Utilizing Light Responsive Covalent Adaptable Cholesteric Liquid Crystal Elastomers
Abstract A mechanochromic, programmable, cholesteric liquid crystalline elastomer (CLCE) is fabricated, and after straining, resulting in a blue shift through the visible spectrum, is returned to its initial shape and color upon heating through its isotropic phase transition. Light initiated, radical‐mediated, addition fragmentation chain transfer (AFT), facilitate permanent programming or erasure of thermoreversible shape and color by relaxing stress imparted on the strained network through reversible bond exchange. Thermoreversible strain is coupled with reversible color change and can be made permanent at any desired strain by light exposure and corresponding AFT activation, temporarily restoring nearly initial shape and color upon heating. The optical characteristics and photonic structure, inherently linked to the network, are measured as a function of strain, to confirm the reflection notch narrowing indicating that prepolymerization alignment via shearing is poor thereby causing a broad spectrum of reflected light that narrows when the material is stretched. Beyond programming a new shape and color, the reflection notch is erased and separately, photopatterned to achieve dynamic color schemes that are toggled with heating and cooling, similar to that of a chameleon's camouflaging technique that has the ability to manipulate multiple colors in a single material, also with use for strain mapping.  more » « less
Award ID(s):
1809841
PAR ID:
10456164
Author(s) / Creator(s):
 ;  ;  ;  
Publisher / Repository:
Wiley Blackwell (John Wiley & Sons)
Date Published:
Journal Name:
Advanced Functional Materials
Volume:
30
Issue:
35
ISSN:
1616-301X
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; (, Soft Matter)
    null (Ed.)
    Reversibly programmable liquid crystal elastomer microparticles (LCEMPs), formed as a covalent adaptable network (CAN), with an average diameter of 7 μm ± 2 μm, were synthesized via a thiol-Michael dispersion polymerization. The particles were programmed to a prolate shape via a photoinitiated addition–fragmentation chain-transfer (AFT) exchange reaction by activating the AFT after undergoing compression. Due to the thermotropic nature of the AFT-LCEMPs, shape switching was driven by heating the particles above their nematic–isotropic phase transition temperature ( T NI ). The programmed particles subsequently displayed cyclable two-way shape switching from prolate to spherical when at low or high temperatures, respectively. Furthermore, the shape programming is reversible, and a second programming step was done to erase the prolate shape by initiating AFT at high temperature while the particles were in their spherical shape. Upon cooling, the particles remained spherical until additional programming steps were taken. Particles were also programmed to maintain a permanent oblate shape. Additionally, the particle surface was programmed with a diffraction grating, demonstrating programmable complex surface topography via AFT activation. 
    more » « less
  2. ; ; ; ; (, Advanced Materials)
    Abstract Mechanoresponsive color‐changing materials that can reversibly and resiliently change color in response to mechanical deformation are highly desirable for diverse modern technologies in optics, sensors, and robots; however, such materials are rarely achieved. Here, a fatigue‐resistant mechanoresponsive color‐changing hydrogel (FMCH) is reported that exhibits reversible, resilient, and predictable color changes under mechanical stress. At its undeformed state, the FMCH remains dark under a circular polariscope; upon uniaxial stretching of up to six times its initial length, it gradually shifts its color from black, to gray, yellow, and purple. Unlike traditional mechanoresponsive color‐changing materials, FMCH maintains its performance across various strain rates for up to 10 000 cycles. Moreover, FMCH demonstrates superior mechanical properties with fracture toughness of 3000 J m−2, stretchability of 6, and fatigue threshold up to 400 J m−2. These exceptional mechanical and optical features are attributed to FMCH's substantial molecular entanglements and desirable hygroscopic salts, which synergistically enhance its mechanical toughness while preserving its color‐changing performance. One application of this FMCH as a tactile sensoris then demonstrated for vision‐based tactile robots, enabling them to discern material stiffness, object shape, spatial location, and applied pressure by translating stress distribution on the contact surface into discernible images. 
    more » « less
  3. ; ; ; ; (, Angewandte Chemie International Edition)
    Abstract Diarylethene‐functionalized liquid‐crystalline elastomers (DAE‐LCEs) containing thiol‐anhydride bonds were prepared and shown to undergo reversible, reprogrammable photoinduced actuation. Upon exposure to UV light, a monodomain DAE‐LCE generated 5.5 % strain. This photogenerated strain was demonstrated to be optically reversible over five cycles of alternating UV/Visible light exposure with minimal photochrome fatigue. The incorporation of thiol‐anhydride dynamic bonds allowed for retention of actuated states. Further, re‐programming of the nematic director was achieved by heating above the temperature for bond exchange to occur (70 °C) yet below the nematic‐to‐isotropic transition temperature (100 °C) such that order was maintained between mesogens. The observed thermal stability of each of the diarylethene isomers of over 72 h allowed for decoupling of photo‐induced processes and polymer network effects, showing that both polymer relaxation and back‐isomerization of the diarylethene contributed to LCE relaxation over a period of 12 hours after actuation unless bond exchange occurred. 
    more » « less
  4. ; ; ; (, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences)
    Due to the complex behaviour of amorphous shape memory polymers (SMPs), traditional constitutive models often struggle with material-specific limitations, challenging curve-fitting, history-dependent stress calculations and error accumulation from stepwise calculation for governing equations. In this study, we propose a physics-informed artificial neural network (PIANN) that integrates a conventional neural network with a strain-based phase transition framework to predict the constitutive behaviour of amorphous SMPs. The model is validated using five temperature–stress datasets and four temperature–strain datasets, including experimental data from four types of SMPs and simulation results from a widely accepted model. PIANN predicts four key shape memory behaviours: stress evolution during hot programming, stress recovery following both cold and hot programming and free strain recovery during heating branch. Notably, it predicts recovery strain during heating without using any heating data for training. Comparisons with experimental data show excellent agreement in both programming (cooling) and recovery (heating) branches. Remarkably, the model achieves this performance with as few as two temperature–stress curves in the training set. Overall, PIANN addresses common challenges in SMP modelling by eliminating history dependence, improving curve-fitting accuracy and significantly enhancing computational efficiency. This work represents a substantial step forward in developing generalizable models for SMPs. 
    more » « less
  5. ; ; ; ; ; (, Chemical Science)
    null (Ed.)
    A mechanochemistry based approach is proposed to detect and map stress history during dynamic processes. Spiropyran (SP), a force sensitive molecular probe, was incorporated as a crosslinker into multiple network elastomers (MNE). When these mechanochromic MNEs are loaded, SP undergoes a well-known force-activated reaction to merocyanine (MC) changing its absorption in the visible range (visible blue color). This SP to MC transition is not reversible within the time frame of the experiment and the color change reports the concentration of activated molecules. During subsequent loading–unloading cycles the MC undergoes a fast and reversible isomerization resulting in a slight shift of absorption spectrum and results in a second color change (blue to purple color corresponding to the loading–unloading cycles). Quantification of the color changes by using chromaticity shows that the exact color observed upon unloading is characteristic not only of the current stress (reported by the shift in color due to MC isomerization), but of the maximum stress that the material has seen during the loading cycle (reported by the shift in color due to the change in MC concentration). We show that these two color changes can be separated unambiguously and we use them to map the stress history in the loading and unloading process occurring as a crack opens up and propagates, breaking the material. Color maps on fractured samples are compared with finite element simulations and the agreement is excellent. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email