An official website of the United States government
Triple cation Cs/methylammonium (MA)/formamidinium (FA) and double halide Br/I lead perovskites improved the stability and efficiency of perovskite solar cells (PVSCs). However, their effects on alloyed Pb–Sn perovskites are unexplored. In this work, perovskite thin films with the composition Cs x (MA 0.17 FA 0.83 ) 1−x Pb 1−y Sn y (I 0.83 Br 0.17 ) 3 are synthesized utilizing a one-step solution process plus an anti-solvent wash technique and deployed in PVSCs with an inverted architecture. All films show a cubic crystal structure, demonstrating that compositional tuning of both the tolerance factor and crystallization rate allows for dense, single phase formation. The band gaps, affected by both lattice constriction and octahedral tilting, show opposite trends in Pb-rich or Sn-rich perovskites with the increase of Cs for fixed Sn compositions. The Cs 0.05 (MA 0.17 FA 0.83 ) 0.95 Pb 0.25 Sn 0.75 (I 0.83 Br 0.17 ) 3 PVSCs achieve a power conversion efficiency (PCE) of 11.05%, a record for any PVSC containing 75% Sn perovskites, and the Cs 0.10 (MA 0.17 FA 0.83 ) 0.90 Pb 0.75 Sn 0.25 (I 0.83 Br 0.17 ) 3 PVSCs reach a record PCE of 15.78%. Moreover, the triple cation and double halide alloyed Pb–Sn perovskites exhibit improved device stability under inert and ambient conditions. This study, which illustrates the impact of cation and halide tuning on alloyed Pb–Sn perovskites, can be used to further eliminate Pb and improve device performance of high Sn PVSCs and other optoelectronic devices.
more »
« less
(FA 0.83 MA 0.17 ) 0.95 Cs 0.05 Pb(I 0.83 Br 0.17 ) 3 Perovskite Films Prepared by Solvent Volatilization for High‐Efficiency Solar Cells
Perovskite solar cells (PSCs) have attracted significant research efforts due to their remarkable performance. However, most perovskite films are prepared by the antisolvent method which is not suitable for practical applications. Herein, a (FA0.83MA0.17)0.95Cs0.05Pb(I0.83Br0.17)3(CsFAMA) perovskite film fabrication technique is developed using solvent volatilization without any antisolvents. The films are formed through recrystallization via the intermediate phase CsMAFAPbIxClyBrzduring annealing, leading to high‐quality perovskite films. The perovskite growth mechanism is investigated in terms of controlling the amount of formamidinium iodide and methylammonium chloride in the precursor solutions. The oriental growth of the films via the intermediate phase is confirmed by the grazing‐incidence wide‐angle X‐ray scattering measurements. The photovoltaic properties of the perovskite films are investigated. The PSCs based on the films fabricated using the method exhibit a high efficiency of 20.6%. The method developed in this work is based on solvent volatilization, which exhibits significant potential in high reproducibility, facile operation, and large‐scale production.
more »
« less
- PAR ID:
- 10302576
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Solar RRL
- Volume:
- 5
- Issue:
- 11
- ISSN:
- 2367-198X
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract The performance of large‐area perovskite solar cells (PSCs) has been assessed for typical compositions, such as methylammonium lead iodide (MAPbI3), using a blade coater, slot‐die coater, solution shearing, ink‐jet printing, and thermal evaporation. However, the fabrication of large‐area all‐inorganic perovskite films is not well developed. This study develops, for the first time, an eco‐friendly solvent engineered all‐inorganic perovskite ink of dimethyl sulfoxide (DMSO) as a main solvent with the addition of acetonitrile (ACN), 2‐methoxyethanol (2‐ME), or a mixture of ACN and 2‐ME to fabricate large‐area CsPbI2.77Br0.23films with slot‐die coater at low temperatures (40–50 °C). The perovskite phase, morphology, defect density, and optoelectrical properties of prepared with different solvent ratios are thoroughly examined and they are correlated with their respective colloidal size distribution and solar cell performance. The optimized slot‐die‐coated CsPbI2.77Br0.23perovskite film, which is prepared from the eco‐friendly binary solvents dimethyl sulfoxide:acetonitrile (0.8:0.2 v/v), demonstrates an impressive power conversion efficiency (PCE) of 19.05%. Moreover, the device maintains ≈91% of its original PCE after 1 month at 20% relative humidity in the dark. It is believed that this study will accelerate the reliable manufacturing of perovskite devices.more » « less
-
Rapid chemistry and processing development has increased the performance of perovskite solar cells (PSCs) in an unprecedented manner, yet postdeposition annealing impedes high‐throughput manufacturing. Herein, SnO2and carbon charge transport films are fabricated entirely through an integrated robotic setup utilizing inkjet printing and intense pulse light (IPL) as a high‐speed postprocess annealing method; hence, process optimization is crucial for successful fabrication of PSCs. This work investigates the role of inkjet deposition parameters as well as IPL annealing on the morphology and uniformity of films with aid of spectroscopy and spectrophotometry. Initially PSCs exceeding 13% efficiency are developed by only fabricating the SnO2film through the robotic setup, but spin coating all other films followed by IPL annealing to demonstrate successful fabrication of SnO2layer. Finally, SnO2and carbon back contact films are entirely fabricated through the integrated robotic setup in a high humid ambient environment (>60%), resulting in PSCs exceeding 5% efficiency. Unlike successful direct annealing of SnO2wet films, IPL annealing of wet carbon severely damaged the phase and morphology necessitating rapid solvent removal before IPL annealing. This work establishes pioneering steps towards utilizing IPL in an entirely automated fabrication line, allowing for scalable fabrication of PSCs through non‐roll‐to‐roll.more » « less
-
Abstract Materials with tunable infrared refractive index changes have enabled active metasurfaces for novel control of optical circuits, thermal radiation, and more. Ion‐gel‐gated epitaxial films of the perovskite cobaltite La1−xSrxCoO3−δ(LSCO) with 0.00 ≤x≤ 0.70 offer a new route to significant, voltage‐tuned, nonvolatile refractive index modulation for infrared active metasurfaces, shown here through Kramers–Kronig‐consistent dispersion models, structural and electronic transport characterization, and electromagnetic simulations before and after electrochemical reduction. As‐grown perovskite films are high‐index insulators forx< 0.18 but lossy metals forx> 0.18, due to a percolation insulator‐metal transition. Positive‐voltage gating of LSCO transistors withx> 0.18 reveals a metal‐insulator transition from the metallic perovskite phase to a high‐index (n> 2.5), low‐loss insulating phase, accompanied by a perovskite to oxygen‐vacancy‐ordered brownmillerite transformation at highx. Atx< 0.18, despite nominally insulating character, the LSCO films undergo remarkable refractive index changes to another lower‐index, lower‐loss insulating perovskite state with Δn >0.6. In simulations of plasmonic metasurfaces, these metal‐insulator and insulator‐insulator transitions support significant, varied mid‐infrared reflectance modulation, thus framing electrochemically gated LSCO as a diverse library of room‐temperature phase‐change materials for applications including dynamic thermal imaging, camouflage, and optical memories.more » « less
