skip to main content


Title: Impacts of cloud microphysics parameterizations on simulated aerosol–cloud interactions for deep convective clouds over Houston
Abstract. Aerosol–cloud interactions remain largely uncertain with respect to predicting theirimpacts on weather and climate. Cloud microphysics parameterization is oneof the factors leading to large uncertainty. Here, we investigate the impactsof anthropogenic aerosols on the convective intensity and precipitation of athunderstorm occurring on 19 June 2013 over Houston with the Chemistryversion of Weather Research and Forecast model (WRF-Chem) using the Morrisontwo-moment bulk scheme and spectral bin microphysics (SBM) scheme. We findthat the SBM predicts a deep convective cloud that shows better agreement withobservations in terms of reflectivity and precipitation compared with theMorrison bulk scheme that has been used in many weather and climate models.With the SBM scheme, we see a significant invigoration effect on convectiveintensity and precipitation by anthropogenic aerosols, mainly throughenhanced condensation latent heating. Such an effect is absent withthe Morrison two-moment bulk microphysics, mainly because the saturationadjustment approach for droplet condensation and evaporation calculationlimits the enhancement by aerosols in (1) condensation latent heat byremoving the dependence of condensation on droplets and aerosols and (2) ice-related processes because the approach leads to stronger warm rain andweaker ice processes than the explicit supersaturation approach.  more » « less
Award ID(s):
1837811
NSF-PAR ID:
10308642
Author(s) / Creator(s):
; ; ;
Date Published:
Journal Name:
Atmospheric Chemistry and Physics
Volume:
21
Issue:
4
ISSN:
1680-7324
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Abstract

    A framework is introduced to investigate the indirect effect of aerosol loading on tropical deep convection using three-dimensional limited-domain idealized cloud-system-resolving model simulations coupled with large-scale dynamics over fixed sea surface temperature. The large-scale circulation is parameterized using the spectral weak temperature gradient (WTG) approximation that utilizes the dominant balance between adiabatic cooling and diabatic heating in the tropics. The aerosol loading effect is examined by varying the number of cloud condensation nuclei (CCN) available to form cloud droplets in the two-moment bulk microphysics scheme over a wide range of environments from 30 to 5000 cm−3. The radiative heating is held at a constant prescribed rate in order to isolate the microphysical effects. Analyses are performed over the period after equilibrium is achieved between convection and the large-scale environment. Mean precipitation is found to decrease modestly and monotonically when the aerosol number concentration increases as convection gets weaker, despite the increase in cloud liquid water in the warm-rain region and ice crystals aloft. This reduction is traced down to the reduction in surface enthalpy fluxes as an energy source to the atmospheric column induced by the coupling of the large-scale motion, though the gross moist stability remains constant. Increasing CCN concentration leads to 1) a cooler free troposphere because of a reduction in the diabatic heating and 2) a warmer boundary layer because of suppressed evaporative cooling. This dipole temperature structure is associated with anomalously descending large-scale vertical motion above the boundary layer and ascending motion at lower levels. Sensitivity tests suggest that changes in convection and mean precipitation are unlikely to be caused by the impact of aerosols on cloud droplets and microphysical properties but rather by accounting for the feedback from convective adjustment with the large-scale dynamics. Furthermore, a simple scaling argument is derived based on the vertically integrated moist static energy budget, which enables estimation of changes in precipitation given known changes in surfaces enthalpy fluxes and the constant gross moist stability. The impact on cloud hydrometeors and microphysical properties is also examined, and it is consistent with the macrophysical picture.

     
    more » « less
  2. null (Ed.)
    Abstract. Changes in land cover and aerosols resulting from urbanization may impactconvective clouds and precipitation. Here we investigate how Houstonurbanization can modify sea-breeze-induced convective cloud and precipitation through the urban land effect and anthropogenic aerosol effect. The simulations are carried out with the Chemistry version of the WeatherResearch and Forecasting model (WRF-Chem), which is coupled with spectral-bin microphysics (SBM) and the multilayer urban model with abuilding energy model (BEM-BEP). We find that Houston urbanization (thejoint effect of both urban land and anthropogenic aerosols) notably enhancesstorm intensity (by ∼ 75 % in maximum vertical velocity) andprecipitation intensity (up to 45 %), with the anthropogenic aerosoleffect more significant than the urban land effect. Urban land effectmodifies convective evolution: speed up the transition from the warm cloudto mixed-phase cloud, thus initiating surface rain earlier but slowing down the convective cell dissipation, all of which result from urban heating-induced stronger sea-breeze circulation. The anthropogenic aerosol effectbecomes evident after the cloud evolves into the mixed-phase cloud,accelerating the development of storm from the mixed-phase cloud to deepcloud by ∼ 40 min. Through aerosol–cloud interaction (ACI), aerosols boost convective intensity and precipitation mainly by activatingnumerous ultrafine particles at the mixed-phase and deep cloud stages. Thiswork shows the importance of considering both the urban land and anthropogenic aerosol effects for understanding urbanization effects on convective cloudsand precipitation. 
    more » « less
  3. Abstract. Regions with high ice water content (HIWC), composed of mainly small ice crystals, frequently occur over convective clouds in the tropics. Such regions can have median mass diameters (MMDs) <300 µm and equivalent radar reflectivities <20 dBZ. To explore formation mechanisms for these HIWCs, high-resolution simulations of tropical convective clouds observed on 26 May 2015 during the High Altitude Ice Crystals – High Ice Water Content (HAIC-HIWC) international field campaign based out of Cayenne, French Guiana, are conducted using the Weather Research and Forecasting (WRF) model with four different bulk microphysics schemes: the WRF single‐moment 6‐class microphysics scheme (WSM6), the Morrison scheme, and the Predicted Particle Properties (P3) scheme with one- and two-ice options. The simulations are evaluated against data from airborne radar and multiple cloud microphysics probes installed on the French Falcon 20 and Canadian National Research Council (NRC) Convair 580 sampling clouds at different heights. WRF simulations with different microphysics schemes generally reproduce the vertical profiles of temperature, dew-point temperature, and winds during this event compared with radiosonde data, and the coverage and evolution of this tropical convective system compared to satellite retrievals. All of the simulations overestimate the intensity and spatial extent of radar reflectivity by over 30 % above the melting layer compared to the airborne X-band radar reflectivity data. They also miss the peak of the observed ice number distribution function for 0.1 more » « less
  4. Abstract. There has been a growing concern that most climate models predict precipitation that is too frequent, likely due to lack of reliable subgrid variabilityand vertical variations in microphysical processes in low-level warm clouds.In this study, the warm-cloud physics parameterizations in the singe-columnconfigurations of NCAR Community Atmospheric Model version 6 and 5 (SCAM6and SCAM5, respectively) are evaluated using ground-based and airborneobservations from the Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Aerosol and Cloud Experiments in the EasternNorth Atlantic (ACE-ENA) field campaign near the Azores islands during2017–2018. The 8-month single-column model (SCM) simulations show that both SCAM6 and SCAM5 cangenerally reproduce marine boundary layer cloud structure, majormacrophysical properties, and their transition. The improvement in warm-cloud properties from the Community Atmospheric Model 5 and 6 (CAM5 to CAM6) physics can be found through comparison with the observations. Meanwhile, both physical schemes underestimate cloud liquidwater content, cloud droplet size, and rain liquid water content butoverestimate surface rainfall. Modeled cloud condensation nuclei (CCN)concentrations are comparable with aircraft-observed ones in the summer but areoverestimated by a factor of 2 in winter, largely due to the biases in thelong-range transport of anthropogenic aerosols like sulfate. We also testthe newly recalibrated autoconversion and accretion parameterizations thataccount for vertical variations in droplet size. Compared to theobservations, more significant improvement is found in SCAM5 than in SCAM6.This result is likely explained by the introduction of subgrid variationsin cloud properties in CAM6 cloud microphysics, which further suppresses thescheme's sensitivity to individual warm-rain microphysical parameters. Thepredicted cloud susceptibilities to CCN perturbations in CAM6 are within areasonable range, indicating significant progress since CAM5 which produces anaerosol indirect effect that is too strong. The present study emphasizes theimportance of understanding biases in cloud physics parameterizations bycombining SCM with in situ observations.

     
    more » « less
  5. Abstract

    Bin and bulk schemes are the two primary methods to parameterize cloud microphysical processes. This study attempts to reveal how their structural differences (size‐resolved vs. moment‐resolved) manifest in terms of cloud and precipitation properties. We use a bulk scheme, the Arbitrary Moment Predictor (AMP), which uses process parameterizations identical to those in a bin scheme but predicts only moments of the size distribution like a bulk scheme. As such, differences between simulations using AMP's bin scheme and simulations using AMP itself must come from their structural differences. In one‐dimensional kinematic simulations, the overall difference between AMP (bulk) and bin schemes is found to be small. Full‐microphysics AMP and bin simulations have similar mean liquid water path (mean percent difference <4%), but AMP simulates significantly lower mean precipitation rate (−35%) than the bin scheme due to slower precipitation onset. Individual processes are also tested. Condensation is represented almost perfectly with AMP, and only small AMP‐bin differences emerge due to nucleation, evaporation, and sedimentation. Collision‐coalescence is the single biggest reason for AMP‐bin divergence. Closer inspection shows that this divergence is primarily a result of autoconversion and not of accretion. In full microphysics simulations, lowering the diameter threshold separating cloud and rain category in AMP fromtoreduces the largest AMP‐bin difference to ∼10%, making the effect of structural differences between AMP (and perhaps triple‐moment bulk schemes generally) and bin even smaller than the parameterization differences between the two bin schemes.

     
    more » « less