skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.


Title: Microfluidic rheology of methylcellulose solutions in hyperbolic contractions and the effect of salt in shear and extensional flows
Methylcellulose solutions are known to form microfibrils at elevated temperatures or in the presence of salt. The fibrils have a significant impact on the solution's rheological properties. Here, the shear and extensional properties of methylcellulose solutions with added salt are measured using hyperbolic microfluidic channels, allowing for new characterization at lower molecular weights and higher shear and strain rates that are difficult to access by macroscale rheology studies. 1 and 2 wt% methylcellulose solutions with molecular weight of 150 kg mol −1 with NaCl content between 0 to 5 wt% have been characterized. All solutions were found to be shear thinning, with power law thinning behavior at shear rates above 100 s −1 . The addition of NaCl up to 5 wt% had only small effects on shear viscosity at the shear rates probed (100 s −1 and 10 000 s −1 ). Extensional viscosities as low as 0.02 Pa s were also measured. Unlike the results for shear viscosity, the addition of 5 wt% NaCl caused significant changes in extensional viscosity, increasing by up to 10 times, depending on extension rate. Additionally, all solutions tested showed apparent extensional thinning in the high strain rate regime (>100 s −1 ), which has not been reported in other studies of methylcellulose solutions. These findings may provide insight for those using methylcellulose solutions in process designs involving extensional flows over a wide range of strain rates.  more » « less
Award ID(s):
1420013
PAR ID:
10310109
Author(s) / Creator(s):
; ;
Date Published:
Journal Name:
Soft Matter
Volume:
16
Issue:
22
ISSN:
1744-683X
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. null (Ed.)
    Nail lacquer formulations are multi-ingredient complex fluids with additives that affect color, smell, texture, evaporation rate, viscosity, stability, leveling behavior, consumer's sensory experience, and dried coating's decorative and wear performance. Optimizing and characterizing the formulation rheology is critical for achieving longer shelf-life, better control over the nail painting process and adhesion, continuous manufacturing of large product volumes, and increasing overall consumer satisfaction. Dispensing, bottle filling, brush application, and dripping, as well as perceived tackiness of nail polishes, all involve capillarity-driven pinching flows associated with strong extensional deformation fields. However, a significant lack of characterization of pinching dynamics and extensional rheology response of multicomponent formulations, especially particle suspensions in viscoelastic solutions, motivates this study. Here, we characterize the shear rheology response of twelve commercial nail lacquer formulations using torsional rheometry and characterize pinching dynamics and extensional rheology response using dripping-onto-substrate (DoS) rheometry protocols we developed. We visualize and analyze brush loading, nail coating, dripping from brush, sagging, and lacquer application on a nail to outline the challenges posed by free-surface flows and non-Newtonian rheology. We find that the radius evolution over time obtained using DoS rheometry displays power law exponents distinct from those exhibited in shear thinning. Both shear and extensional viscosity decrease with deformation rate. However, the extensional viscosity appears to be rate-independent at the highest rates and displays nearly an order of magnitude larger values than the high shear rate viscosity. We envision that the findings and protocols described here will help and motivate industrial scientists to design better multicomponent formulations through a better characterization and understanding of the influence of ingredients like particles and polymers on rheology, processing, and applications. 
    more » « less
  2. Abstract The viscosity of fluids and their dependence on shear rate, known as shear thinning, plays a critical role in applications ranging from lubricants and coatings to biomedical and food-processing industries. Traditional models such as the Carreau and Eyring theories offer competing explanations for shear-thinning behavior. The Carreau model attributes viscosity reduction to molecular distortions, while the Eyring model describes shear thinning as a stress-induced transition over an activation energy barrier. This work proposes an extended-Eyring model that incorporates stress-dependent activation volumes, bridging key aspects of both theories. In modifying transition-state theory by using an Evans-Polanyi perturbation analysis, we derive a generalized viscosity equation that accounts for the molecular-scale rearrangements governing fluid flow. The model is validated against computational and experimental data, including shear-thinning behavior of pure squalane and polyethylene oxide (PEO) aqueous solutions. Comparative analysis with Carreau-Yasuda and conventional Eyring models demonstrates excellent accuracy in predicting viscosity trends over a wide range of shear rates. The introduction of stress-dependent activation volumes provides a description of molecular exchange kinetics accounting for structural reorganization under shear. These findings offer a unified framework for modeling shear thinning and have broad implications for designing advanced lubricants, polymer solutions, and complex fluids with tailored flow properties. Graphical Abstract 
    more » « less
  3. Lyotropic chromonic liquid crystals (LCLCs) represent aqueous dispersions of organic disk-like molecules that form cylindrical aggregates. Despite the growing interest in these materials, their flow behavior is poorly understood. Here, we explore the effect of shear on dynamic structures of the nematic LCLC, formed by 14 wt% water dispersion of disodium cromoglycate (DSCG). We employ in situ polarizing optical microscopy (POM) and small-angle and wide-angle X-ray scattering (SAXS/WAXS) to obtain independent and complementary information on the director structures over a wide range of shear rates. The DSCG nematic shows a shear-thinning behavior with two shear-thinning regions (Region I at  < 1 s −1 and Region III at  > 10 s −1 ) separated by a pseudo-Newtonian Region II (1 s −1 <  < 10 s −1 ). The material is of a tumbling type. In Region I,  < 1 s −1 , the director realigns along the vorticity axis. An increase of  above 1 s −1 triggers nucleation of disclination loops. The disclinations introduce patches of the director that deviates from the vorticity direction and form a polydomain texture. Extension of the domains along the flow and along the vorticity direction decreases with the increase of the shear rate to 10 s −1 . Above 10 s −1 , the domains begin to elongate along the flow. At  > 100 s −1 , the texture evolves into periodic stripes in which the director is predominantly along the flow with left and right tilts. The period of stripes decreases with an increase of  . The shear-induced transformations are explained by the balance of the elastic and viscous energies. In particular, nucleation of disclinations is associated with an increase of the elastic energy at the walls separating nonsingular domains with different director tilts. The uncovered shear-induced structural effects would be of importance in the further development of LCLC applications. 
    more » « less
  4. Surfactants are often added to particle suspensions in the flow of Newtonian or non-Newtonian fluids for the purpose of reducing particle-particle aggregation and particle-wall adhesion. However, the impact on the flow behavior of such surfactant additions is often overlooked. We experimentally investigate the effect of the addition of a frequently used neutral surfactant, Tween 20, at the concentration pertaining to microfluidic applications on the entry flow of water and three common polymer solutions through a planar cavity microchannel. We find that the addition of Tween 20 has no significant influence on the shear viscosity or extensional flow of Newtonian water and Boger polyethylene oxide solution. However, such a surfactant addition reduces both the shear viscosity and shear-thinning behavior of xanthan gum and polyacrylamide solutions that each exhibit a strong shear-thinning effect. It also stabilizes the cavity flow and delays the onset of flow instability in both cases. The findings of this work can directly benefit microfluidic applications of particle and cell manipulation in Newtonian and non-Newtonian fluids. 
    more » « less
  5. null (Ed.)
    Understanding and characterizing the influence of polymers and surfactants on rheology, application, and processing is critical for designing complex fluid formulations for enhanced oil recovery, pharmaceuticals, cosmetics, foods, inks, agricultural sprays, and coatings. It is well-established that the addition of anionic surfactant like sodium dodecyl sulfate (SDS) to an aqueous solution of an oppositely-charged or uncharged polymer like poly(ethylene oxide) (PEO) can result in the formation of the polymer–surfactant association complexes (P 0 S − ACs) and a non-monotonic concentration-dependent variation in zero shear viscosity. However, the extensional rheology response of polymer–surfactant mixtures remains relatively poorly understood, partially due to characterization challenges that arise for low viscosity, low elasticity fluids, even though the response to strong extensional flows impacts drop formation and many processing operations. In this article, we use the recently developed dripping-onto-substrate (DoS) rheometry protocols to characterize the pinching dynamics and extensional rheology response of aqueous P 0 S − solutions formulated with PEO (P 0 ) and SDS (S − ), respectively. We find the PEO–SDS mixtures display a significantly weaker concentration-dependent variation in the extensional relaxation time, filament lifespan, and extensional viscosity values than anticipated by the measured shear viscosity. 
    more » « less