An official website of the United States government
Direct write Inkjet Printing is a versatile additive manufacturing technology that allows for the fabrication of multiscale structures with dimensions spanning from nano to cm scale. This is made possible due to the development of novel dispensing tools, enabling controlled and precise deposition of fluid with a wide range of viscosities (1 – 50 000 mPas) in nano-liter volumes. As a result, Inkjet printing has been recognized as a potential low-cost alternative for several established manufacturing methods, including cleanroom fabrication. In this paper, we present a characterization study of PEDOT: PSS polymer ink deposition printing process realized with the help of an automated, custom Direct Write Inkjet system. PEDOT: PSS is a highly conductive ink that possesses good film forming capabilities. Applications thus include printing thin films on flexible substrates for tactile (touch) sensors. We applied the Taguchi Design of Experiment (DOE) method to produce the optimal set of PEDOT:PSS ink dispensing parameters, to study their influence on the resulting ink droplet diameter. We experimentally determined that the desired outcome of a printed thin film with minimum thickness is directly related to 1) the minimum volume of dispensed fluid and 2) the presence of a preprocessing step, namely air plasma treatment of the Kapton substrate. Results show that an ink deposit with a minimum diameter of 482 μm, and a thin film with approximately 300 nm thickness were produced with good repeatability.
more »
« less
Adhesive Deposition Process Characterization for Microstructure Assembly
Recent advancements in additive manufacturing such as Direct Write Inkjet printing introduced novel tools that allow controlled and precise deposition of fluid in nano-liter volumes, enabling fabrication of multiscale structures with submillimeter dimensions. Applications include fabrication of flexible electronics, sensors, and assembly of Micro-Electro-Mechanical Systems (MEMS). Critical challenges remain in the control of fluid deposition parameters during Inkjet printing to meet specific dimensional footprints at the microscale necessary for the assembly process of microscale structures. In this paper we characterize an adhesive deposition printing process with a piezo-electric dispenser of nano-liter volumes. Applications include the controlled delivery of high viscosity Ultraviolet (UV) and thermal curable adhesives for the assembly of the MEMS structures. We applied the Taguchi Design of Experiment (DOE) method to determine an optimal set of process parameters required to minimize the size of adhesive printed features on a silicon substrate with good reliability and repeatability of the deposition process. Experimental results demonstrate repeatable deposition of UV adhesive features with 150 μm diameter on the silicon substrate. Based on the observed wettability effect of adhesive printed onto different substrates we propose a solution for further reduction of the deposit-substrate contact area for microassembly optimization.
more »
« less
- PAR ID:
- 10310579
- Date Published:
- Journal Name:
- 16th International Manufacturing Science and Engineering Conference
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Direct write Inkjet Printing is a versatile additive manufacturing technology that allows for the fabrication of multiscale structures with dimensions spanning from nano to cm scale. This is made possible due to the development of novel dispensing tools, enabling controlled and precise deposition of fluid with a wide range of viscosities (1 – 50 000 mPas) in nanoliter volumes. As a result, Inkjet printing has been recognized as a potential low-cost alternative for several established manufacturing methods, including cleanroom fabrication. In this paper, we present a characterization study of PEDOT: PSS polymer ink deposition printing process realized with the help of an automated, custom Direct Write Inkjet system. PEDOT: PSS is a highly conductive ink that possesses good film forming capabilities. Applications thus include printing thin films on flexible substrates for tactile (touch) sensors. We applied the Taguchi Design of Experiment (DOE) method to produce the optimal set of PEDOT:PSS ink dispensing parameters, to study their influence on the resulting ink droplet diameter. We experimentally determined that the desired outcome of a printed thin film with minimum thickness is directly related to 1) the minimum volume of dispensed fluid and 2) the presence of a preprocessing step, namely air plasma treatment of the Kapton substrate. Results show that an ink deposit with a minimum diameter of 482 μm, and a thin film with approximately 300 nm thickness were produced with good repeatability.more » « less
-
Additive manufacturing, also known as three-dimensional (3D) printing, is an approach in which a structure may be fabricated layer by layer. For 3D inkjet printing, droplets are ejected from a nozzle and each layer is formed droplet by droplet. Inkjet printing has been widely applied for the fabrication of 3D biological gel structures, but the knowledge of the microscale interactions between printed droplets is still largely elusive. This study aims to elucidate the alginate layer formation process during drop-on-demand inkjet printing using high speed imaging and particle image velocimetry. Droplets are found to impact, spread, and coalesce within a fluid region at the deposition site, forming coherent printed lines within a layer. Interfaces are found to form between printed lines within a layer depending on printing conditions and printing path orientation. The effects of printing conditions on the behavior of droplets during layer formation are discussed and modeled based on gelation dynamics, and recommendations are presented to enable controllable and reliable fabrication of gel structures.more » « less
-
In recent years, inkjet printing has become a popular form for creating sensors and antennas. These devices are fabricated using different materials with inkjet printing using various (conductive, oxide, biological) inks on predominantly flexible substrate. This form of fabrication has attracted much attention for a variety of reasons such as relatively cheap cost of manufacturing and materials, as well as the ease of use and high customization. These devices also provide a lighter frame and added flexibility allowing them to be incorporated as devices on non-planar surfaces. It is also possible for inkjet printing to be used as a sustainable manufacturing method, providing a method of reducing electronic waste. In this article, several topics related to inkjet printing are covered. These topics include a general overview of the fabrication process of inkjet devices through an inkjet printer, recent applications of inkjet-printed sensors, applications of inkjet-printed antennae, challenges in inkjet printing, and an outlook on the inkjet printing. In the fabrication section, the different materials and printing process are explored. Topics covered in the application section include gas sensors, biomedical sensors, pressure sensors, temperature sensors, glucose sensors, and more. In the inkjet antennas portion of the article, RFID tagging and 5G applications are highlighted. The main challenges covered are specific to fabrication that are being currently addressed.more » « less
-
Nanoimprinting has been applied in many micro- and nanoscale engineered devices; applications include displays, organic electronics, photovoltaics, optical films, and optoelectronics; and in some cases, direct imprinting of functional polymeric devices. Applications in the photonics area can significantly relieve the stringent requirement needed for nanoelectronics. We provide examples of structural colors and optical meta-surfaces facilitated by nanoimprinting, as well as plasmonic lithography masks that can produce deep-subwavelength structures using ordinary UV light. Inkjet printing has been widely used in many applications, but still faces challenges in pattern precision and feature variations. Combining Nanoimprint for patterning and inkjet printing for material deposition will take the advantage of what both technologies can offer, and can provide a high precision additive manufacturing process. We will show printed photonic devices, e.g. electro-optic polymer based optical modulators. To extend nanoimprinting to solid materials other than polymeric films will require innovative and non-conventional approaches. One such process is Metal-assisted chemical (Mac) imprint, which combines MacEtch and nanoiprint and enables direct MacEtch of Si substrate using a hybrid imprinting mold having noble metal mask. However, only low aspect ratio structures have been obtained because of the mass-transport limitation in the previous molds. Recently we effectively solved this problem by a using a specially made mold of Pt-coated anodized aluminum oxide (AAO) membrane, where the holes through the entire thickness drastically enhances the mass-transport. As a result, very high aspect ratio Si nanowires were achieved by MacImprint.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Paper:
- https://doi.org/10.1115/MSEC2021-63929
