An official website of the United States government
The Josephson junction is a crucial element in superconducting devices, and niobium is a promising candidate for the superconducting material due to its large energy gap relative to aluminum. AlOx has long been regarded as the highest quality oxide tunnel barrier and is often used in niobium-based junctions. Here, we propose ZrOx as an alternative tunnel barrier material for Nb electrodes. We theoretically estimate that zirconium oxide has excellent oxygen retention properties and experimentally verify that there is no significant oxygen diffusion leading to NbOx formation in the adjacent Nb electrode. We develop a top–down, subtractive fabrication process for Nb/Zr–ZrOx/Nb Josephson junctions, which enables scalability and large-scale production of superconducting electronics. Using cross-sectional scanning transmission electron microscopy, we experimentally find that depending on the Zr thickness, ZrOx tunnel barriers can be fully crystalline with chemically abrupt interfaces with niobium. Further analysis using electron energy loss spectroscopy reveals that ZrOx corresponds to tetragonal ZrO2. Room temperature characterization of fabricated junctions using Simmons’ model shows that ZrO2 exhibits a low tunnel barrier height, which is promising in merged-element transmon applications. Low temperature transport measurements reveal sub-gap structure, while the low-voltage sub-gap resistance remains in the megaohm range.
more »
« less
Monitoring Pathogenic Viable E. coli O157:H7 in Food Matrices Based on the Detection of RNA Using Isothermal Amplification and a Paper-Based Platform
- Award ID(s):
- 1841419
- PAR ID:
- 10312393
- Date Published:
- Journal Name:
- Analytical Chemistry
- ISSN:
- 0003-2700
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
In situ direct laser writing ( is DLW) strategies that facilitate the printing of three-dimensional (3D) nanostructured components directly inside of, and fully sealed to, enclosed microchannels are uniquely suited for manufacturing geometrically complex microfluidic technologies. Recent efforts have demonstrated the benefits of using micromolding and bonding protocols for is DLW; however, the reliance on polydimethylsiloxane (PDMS) leads to limited fluidic sealing ( e.g. , operational pressures <50–75 kPa) and poor compatibility with standard organic solvent-based developers. To bypass these issues, here we explore the use of cyclic olefin polymer (COP) as an enabling microchannel material for is DLW by investigating three fundamental classes of microfluidic systems corresponding to increasing degrees of sophistication: (i) “2.5D” functionally static fluidic barriers (10–100 μm in height), which supported uncompromised structure-to-channel sealing under applied input pressures of up to 500 kPa; (ii) 3D static interwoven microvessel-inspired structures (inner diameters < 10 μm) that exhibited effective isolation of distinct fluorescently labelled microfluidic flow streams; and (iii) 3D dynamically actuated microfluidic transistors, which comprised bellowed sealing elements (wall thickness = 500 nm) that could be actively deformed via an applied gate pressure to fully obstruct source-to-drain fluid flow. In combination, these results suggest that COP-based is DLW offers a promising pathway to wide-ranging fluidic applications that demand significant architectural versatility at submicron scales with invariable sealing integrity, such as for biomimetic organ-on-a-chip systems and integrated microfluidic circuits.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript
- Journal Article:
- https://doi.org/10.1021/acs.analchem.1c04305
