skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Wireless Power Transfer Through Soil Over a Range of Moisture Levels for In-Situ Soil Health Monitoring
This paper presents the design and measurement results of wireless power transfer through soil over a range of soil moisture levels for future low-cost, wireless, battery-less, and in-situ soil health monitoring technologies. A pair of packaged 6 cm-diameter coils can wirelessly transfer 0.56 mW from an external RF power source of 37 mW through a soil depth of 15 cm over a typical moisture level ranging from low 30% to 40%. An optimal frequency of 1.4 MHz and 1 MHz was chosen for an efficient operation in loamy soil and sandy soil, respectively. The demonstrated power transfer is sufficient to energize underground soil health monitoring devices. In addition, a pair of packaged 12 cm-diameter coils, taking the loss contributed by the surrounding soil into design consideration, can achieve a 130 µW power delivery with an efficiency of approximately 8% over a 30 cm air gap. It is expected that a similar performance can be achieved through a 30 cm soil depth.  more » « less
Award ID(s):
1935632
PAR ID:
10313152
Author(s) / Creator(s):
; ; ; ; ; ; ;
Date Published:
Journal Name:
IEEE Sensors Conference
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. (, IEEE transactions on microwave theory and techniques)
    Near-field resonant-based wireless power transfer (WPT) technology has a significant impact in many applications ranging from charging of biomedical implants to electric vehicles (EVs). The design of robust WPT systems is challenging due to its position-dependent power transfer efficiency (PTE). In this paper, a new approach is presented to address WPT's strong sensitivity to the coupling factor variation between the transmit and receive coils. The introduced technique relies on harnessing the unique properties of a specific class of nonlinear resonant circuits to design position-insensitive WPT systems that maintain a high PTE over large transmission distances and misalignments without tuning the source's operating frequency or employing tunable matching networks, as well as any active feedback/control circuitry. A nonlinear-resonant-based WPT circuit capable of transmitting 60 W at 2.25 MHz is designed and fabricated. The circuit maintains a high PTE of 86% over a transmission distance variation of 20 cm. Furthermore, transmit power and PTE are maintained over a large lateral misalignment up to ±50% of the coil diameter and angular misalignment up to ±75°. The new design approach enhances the performance of WPT systems by significantly extending the range of coupling factors over which both load power and high PTE are maintained. 
    more » « less
  2. ; ; ; ; ; (, Sensors)
    null (Ed.)
    Wearable sensors are a topic of interest in medical healthcare monitoring due to their compact size and portability. However, providing power to the wearable sensors for continuous health monitoring applications is a great challenge. As the batteries are bulky and require frequent charging, the integration of the wireless power transfer (WPT) module into wearable and implantable sensors is a popular alternative. The flexible sensors benefit by being wirelessly powered, as it not only expands an individual’s range of motion, but also reduces the overall size and the energy needs. This paper presents the design, modeling, and experimental characterization of flexible square-shaped spiral coils with different scaling factors for WPT systems. The effects of coil scaling factor on inductance, capacitance, resistance, and the quality factor (Q-factor) are modeled, simulated, and experimentally validated for the case of flexible planar coils. The proposed analytical modeling is helpful to estimate the coil parameters without using the time-consuming Finite Element Method (FEM) simulation. The analytical modeling is presented in terms of the scaling factor to find the best-optimized coil dimensions with the maximum Q-factor. This paper also presents the effect of skin contact with the flexible coil in terms of the power transfer efficiency (PTE) to validate the suitability as a wearable sensor. The measurement results at 405 MHz show that when in contact with the skin, the 20 mm× 20 mm receiver (RX) coil achieves a 42% efficiency through the air media for a 10 mm distance between the transmitter (TX) and RX coils. 
    more » « less
  3. (, Environmental Data Initiative)
    30-minute Soil Moisture data at 10 cm at CSIS Block-13. Collection of soil volumetric water content data at Jornada LTER Cross-scale Interactions Study (CSIS) blocks, New Mexico, supports the environmental monitoring objectives of the Jornada LTER monitoring program that look at plant-soil water dynamics. Soil volumetric water content is measured at 10 cm depth at 3 locations at each of the 4 plots per block. The locations in each plot are under bare soil, under perennial grass, and under shrub. Volumetric water content, bulk electrical conductivity, soil temperature, and bulk dielectric permittivity are recorded every 30 minutes at an automated meteorological station installed at Jornada LTER CSIS Block-13 site. This is an ONGOING dataset. 
    more » « less
  4. (, Environmental Data Initiative)
    30-minute Soil Moisture data at 10 cm at CSIS Block-12. Collection of soil volumetric water content data at Jornada LTER Cross-scale Interactions Study (CSIS) blocks, New Mexico, supports the environmental monitoring objectives of the Jornada LTER monitoring program that look at plant-soil water dynamics. Soil volumetric water content is measured at 10 cm depth at 3 locations at each of the 4 plots per block. The locations in each plot are under bare soil, under perennial grass, and under shrub. Volumetric water content, bulk electrical conductivity, soil temperature, and bulk dielectric permittivity are recorded every 30 minutes at an automated meteorological station installed at Jornada LTER CSIS Block-12 site. This is an ONGOING dataset. 
    more » « less
  5. (, Environmental Data Initiative)
    30-minute Soil Moisture data at 10 cm at CSIS Block-9. Collection of soil volumetric water content data at Jornada LTER Cross-scale Interactions Study (CSIS) blocks, New Mexico, supports the environmental monitoring objectives of the Jornada LTER monitoring program that look at plant-soil water dynamics. Soil volumetric water content is measured at 10 cm depth at 3 locations at each of the 4 plots per block. The locations in each plot are under bare soil, under perennial grass, and under shrub. Volumetric water content, bulk electrical conductivity, soil temperature, and bulk dielectric permittivity are recorded every 30 minutes at an automated meteorological station installed at Jornada LTER CSIS Block-9 site. This is an ONGOING dataset. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email