An official website of the United States government
Hypothesis: Symmetry breaking in an electric field-driven active particle system can be induced by applying a spatially uniform, but temporally non-uniform, alternating current (AC) signal. Regardless of the type of particles exposed to sawtooth AC signals, the unevenly induced polarization of the ionic charge layer leads to a major electrohydrodynamic effect of active propulsion, termed Asymmetric Field Electrophoresis (AFEP). Experiments: Suspensions containing latex microspheres of three sizes, as well as Janus and metal-coated particles were subjected to sawtooth AC signals of varying voltages, frequencies, and time asymmetries. Particle tracking via microscopy was used to analyze their motility as a function of the key parameters. Findings: The particles exhibit field-colinear active propulsion, and the temporal reversal of the AC signal results in a reversal of their direction of motion. The experimental velocity data as a function of field strength, frequency, and signal asymmetry are supported by models of asymmetric ionic concentration-polarization. The direction of particle migration exhibits a size-dependent crossover in the low frequency domain. This enables new approaches for simple and efficient on-chip sorting. Combining AFEP with other AC motility mechanisms, such as induced-charge electrophoresis, allows multiaxial control of particle motion and could enable development of novel AC field-driven active microsystems.
more »
« less
Effect of Carbon Microposts Integrated onto Asymmetric Electrodes for AC Electroosmotic Pumping
The present study compares fluid velocity magnitude and direction for three different glassy carbon electrode systems affecting AC electroosmotic pumping. The flow behavior is analyzed for electroosmotic pumping performed with asymmetric coplanar electrodes. Subsequently, effects of adding microposts array of two different heights (40 μm and 80 μm) are studied. Experimental results demonstrate that as peak-to-peak voltage is increased above 10V peak-to-peak, the flow reversal is achieved for planar electrodes. Utilization of microposts-enhanced asymmetric electrodes blocks the flow reversal and alters the magnitude of the fluid velocity at the application of larger voltages (above 10V peak-to-peak). Understanding of the consequences of three-dimensional geometry of asymmetric electrodes would allow designing the electrode system for AC electroosmotic pumping for electroosmotic mixing and bi-directional pumping with equal forward and backward flow velocities.
more »
« less
- Award ID(s):
- 1661877
- PAR ID:
- 10313497
- Date Published:
- Journal Name:
- Proceedings of the World Congress on Micro and Nano Manufacturing 2018
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Hypothesis The interaction of active particles with walls can explain discrepancies between experiments and theory derived for particles in the bulk. For an electric field driven metallodielectric Janus particle (JP) adjacent to an electrode, interaction between the asymmetric particle and the partially screened electrode yields a net electrostatic force – termed self-dielectrophoresis (sDEP) - that competes with induced-charge electrophoresis (ICEP) to reverse particle direction. Experiments The potential contribution of hydrodynamic flow to the reversal is evaluated by visualizing flow around a translating particle via micro-particle image velocimetry and chemically suppressing ICEP with poly(l-lysine)-g-poly(ethylene glycol) (PLL-PEG). Mobility of Polystyrene-Gold JPs is measured in KCl electrolytes of varying concentration and with a capacitive SiO2 coating at the metallic JP surface or electrode. Results are compared with theory and numerical simulations accounting for electrode screening. Findings PLL-PEG predominantly suppresses low-frequency mobility where propulsive electro-hydrodynamic jetting is observed; supporting the hypothesis of an electrostatic driving force at high frequencies. Simulations and theory show the magnitude, direction and frequency dispersion of JP mobility are obtained by superposition of ICEP and sDEP using the JP height and capacitance as fitting parameters. Wall proximity enhances ICEP and sDEP and manifests a secondary ICEP charge relaxation time dominating in the contact limit.more » « less
-
In this work, we outline a methodology for determining optimal helical flagella placement and phase shift that maximize fluid pumping through a rectangular flow meter above a simulated bacterial carpet. This method uses a Genetic Algorithm (GA) combined with a gradient-based method, the Broyden-Fletcher-Goldfarb-Shanno (BFGS) algorithm, to solve the optimization problem and the Method of Regularized Stokeslets (MRS) to simulate the fluid flow. This method is able to produce placements and phase shifts for small carpets and could be adapted for implementation in larger carpets and various fluid tasks. Our results show that given identical helices, optimal pumping configurations are influenced by the size of the flow meter. We also show that intuitive designs, such as uniform placement, do not always lead to a high-performance carpet.more » « less
-
null (Ed.)We study hydrodynamics, heat transfer, and entropy generation in pressure-driven microchannel flow of a power-law fluid. Specifically, we address the effect of asymmetry in the slip boundary condition at the channel walls. Constant, uniform but unequal heat fluxes are imposed at the walls in this thermally developed flow. The effect of asymmetric slip on the velocity profile, on the wall shear stress, on the temperature distribution, on the Bejan number profiles, and on the average entropy generation and the Nusselt number are established through the numerical evaluation of exact analytical expressions derived. Specifically, due to asymmetric slip, the fluid momentum flux and thermal energy flux are enhanced along the wall with larger slip, which, in turn, shifts the location of the velocity's maximum to an off-center location closer to the said wall. Asymmetric slip is also shown to redistribute the peaks and plateaus of the Bejan number profile across the microchannel, showing a sharp transition between entropy generation due to heat transfer and due to fluid flow at an off-center-line location. In the presence of asymmetric slip, the difference in the imposed heat fluxes leads to starkly different Bejan number profiles depending on which wall is hotter, and whether the fluid is shear-thinning or shear-thickening. Overall, slip is shown to promote uniformity in both the velocity field and the temperature field, thereby reducing irreversibility in this flow.more » « less
-
Our study aims to identify the role of fluid flow in the growth of human bone cancer cells during metastasis. In our experiments, the cancer cells are seeded on the surface of cylindrical scaffolds in a bioreactor. The flow is laminar flow, which mimics the physiological conditions of the human body. A full-scale 3D high-resolution computational mesh of scaffold was created based on the physical scaffold's Micro-CT scans using open-source imaging software Slicer3D and Meshmixer. To investigate the influences of the flow on the seeded cells, we performed Computational Fluid Dynamics (CFD) simulations with the immersed boundary method (Gilmanov, Le, Sotiropoulos, JCP 300, 1, 2015). The computational domain was generated using the commercial software Gridgen. Our results show that the fluid flow velocity is highly dependent on the shape and pore sizes. In addition, the magnitude of the velocity on the surface where the cells are seeded is in between [0-0.05] μm/sallowing the cells to grow without being detached from the surface of the scaffold. Our future work will focus on (i) investigating the role of the shear stress on the distribution and orientation of the cancer cells. (ii) Simulating multiple scaffolds within the bioreactor to further quantify the impact of the gap on the flow velocity and shear.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Paper:
- https://doi.org/10.3850/978-981-11-2728-1_51
