Quantum error correction has recently been shown to benefit greatly from specific physical encodings of the code qubits. In particular, several researchers have considered the individual code qubits being encoded with the continuous variable GottesmanKitaev-Preskill (GKP) code, and then imposed an outer discrete-variable code such as the surface code on these GKP qubits. Under such a concatenation scheme, the analog information from the inner GKP error correction improves the noise threshold of the outer code. However, the surface code has vanishing rate and demands a lot of resources with growing distance. In this work, we concatenate the GKP code with generic quantum low-density parity-check (QLDPC) codes and demonstrate a natural way to exploit the GKP analog information in iterative decoding algorithms. We first show the noise thresholds for two lifted product QLDPC code families, and then show the improvements of noise thresholds when the iterative decoder – a hardware-friendly min-sum algorithm (MSA) – utilizes the GKP analog information. We also show that, when the GKP analog information is combined with a sequential update schedule for MSA, the scheme surpasses the well-known CSS Hamming bound for these code families. Furthermore, we observe that the GKP analog information helps the iterative decoder in escaping harmful trapping sets in the Tanner graph of the QLDPC code, thereby eliminating or significantly lowering the error floor of the logical error rate curves. Finally, we discuss new fundamental and practical questions that arise from this work on channel capacity under GKP analog information, and on improving decoder design and analysis.
more »
« less
Trapping Sets of Quantum LDPC Codes
Iterative decoders for finite length quantum low-density parity-check (QLDPC) codes are attractive because their hardware complexity scales only linearly with the number of physical qubits. However, they are impacted by short cycles, detrimental graphical configurations known as trapping sets (TSs) present in a code graph as well as symmetric degeneracy of errors. These factors significantly degrade the decoder decoding probability performance and cause so-called error floor. In this paper, we establish a systematic methodology by which one can identify and classify quantum trapping sets (QTSs) according to their topological structure and decoder used. The conventional definition of a TS from classical error correction is generalized to address the syndrome decoding scenario for QLDPC codes. We show that the knowledge of QTSs can be used to design better QLDPC codes and decoders. Frame error rate improvements of two orders of magnitude in the error floor regime are demonstrated for some practical finite-length QLDPC codes without requiring any post-processing.
more »
« less
- NSF-PAR ID:
- 10318715
- Date Published:
- Journal Name:
- Quantum
- Volume:
- 5
- ISSN:
- 2521-327X
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
null (Ed.)Neural Normalized MinSum (N-NMS) decoding delivers better frame error rate (FER) performance on linear block codes than conventional normalized MinSum (NMS) by assigning dynamic multiplicative weights to each check-to-variable message in each iteration. Previous N-NMS efforts have primarily investigated short-length block codes (N < 1000), because the number of N-NMS parameters to be trained is proportional to the number of edges in the parity check matrix and the number of iterations, which imposes am impractical memory requirement when Pytorch or Tensorflow is used for training. This paper provides efficient approaches to training parameters of N-NMS that support N-NMS for longer block lengths. Specifically, this paper introduces a family of neural 2-dimensional normalized (N-2D-NMS) decoders with with various reduced parameter sets and shows how performance varies with the parameter set selected. The N-2D-NMS decoders share weights with respect to check node and/or variable node degree. Simulation results justify this approach, showing that the trained weights of N-NMS have a strong correlation to the check node degree, variable node degree, and iteration number. Further simulation results on the (3096,1032) protograph-based raptor-like (PBRL) code show that N-2D-NMS decoder can achieve the same FER as N-NMS with significantly fewer parameters required. The N-2D-NMS decoder for a (16200,7200) DVBS-2 standard LDPC code shows a lower error floor than belief propagation. Finally, a hybrid decoding structure combining a feedforward structure with a recurrent structure is proposed in this paper. The hybrid structure shows similar decoding performance to full feedforward structure, but requires significantly fewer parameters.more » « less
-
Neural Normalized MinSum (N-NMS) decoding delivers better frame error rate (FER) performance on linear block codes than conventional Normalized MinSum (NMS) by assigning dynamic multiplicative weights to each check-to-variable node message in each iteration. Previous N-NMS efforts primarily investigated short block codes (N < 1000), because the number of N-NMS parameters required to be trained scales proportionately to the number of edges in the parity check matrix and the number of iterations. This imposes an impractical memory requirement for conventional tools such as Pytorch and Tensorflow to create the neural network and store gradients. This paper provides efficient methods of training the parameters of N-NMS decoders that support longer block lengths. Specifically, this paper introduces a family of Neural 2-dimensional Normalized (N-2D-NMS) decoders with various reduced parameter sets and shows how performance varies with the parameter set selected. The N-2D-NMS decoders share weights with respect to check node and/or variable node degree. Simulation results justify a reduced parameter set, showing that the trained weights of N- NMS have a smaller value for the neurons corresponding to larger check/variable node degree. Further simulation results on a (3096,1032) Protograph-Based Raptor-Like (PBRL) code show that the N-2D-NMS decoder can achieve the same FER as N- NMS while also providing at least a 99.7% parameter reduction. Furthermore, the N-2D-NMS decoder for the (16200,7200) DVBS- 2 standard LDPC code shows a lower error floor than belief propagation. Finally, this paper proposes a hybrid decoder training structure that utilizes a neural network which combines a feedforward module with a recurrent module. The decoding performance and parameter reduction of the hybrid training depends on the length of recurrent module of the neural network.more » « less
-
For decoding low-density parity-check (LDPC) codes, the attenuated min-sum algorithm (AMSA) and the offset min-sum algorithm (OMSA) can outperform the conventional min-sum algorithm (MSA) at low signal-to-noise-ratios (SNRs), i.e., in the “waterfall region” of the bit error rate curve. This paper demonstrates that, for quantized decoders, MSA actually outperforms AMSA and OMSA in the “error floor” region, and that all three algorithms suffer from a relatively high error floor. This motivates the introduction of a modified MSA that is designed to outperform MSA, AMSA, and OMSA across all SNRs. The new algorithm is based on the assumption that trapping sets are the major cause of the error floor for quantized LDPC decoders. A performance estimation tool based on trapping sets is used to verify the effectiveness of the new algorithm and also to guide parameter selection. We also show that the implementation complexity of the new algorithm is only slightly higher than that of AMSA or OMSA. Finally, the simulated performance of the new algorithm, using several classes of LDPC codes (including spatially coupled LDPC codes), is shown to outperform MSA, AMSA, and OMSA across all SNRs.more » « less
-
It is well known that for decoding low-density parity-check (LDPC) codes, the attenuated min-sum algorithm (AMSA) and the offset min-sum algorithm (OMSA) can outperform the conventional min-sum algorithm (MSA) at low signal-to-noise-ratios (SNRs). In this paper, we demonstrate that, for quantized LDPC decoders, although the MSA achieves better high SNR performance than the AMSA and OMSA, each of the MSA, AMSA, and OMSA all suffer from a relatively high error floor. Therefore, we propose a novel modification of the MSA for decoding quantized LDPC codes with the aim of lowering the error floor. Compared to the quantized MSA, the proposed modification is also helpful at low SNRs, where it matches the waterfall performance of the quantized AMSA and OMSA. The new algorithm is designed based on the assumption that trapping/absorbing sets (or other problematic graphical objects) are the major cause of the error floor for quantized LDPC decoders, and it aims to reduce the probability that these problematic objects lead to decoding errors.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.22331/q-2021-10-14-562
