skip to main content

Explore Research Products in the NSF-PAR

  • NSF Public Access
  • Search Results
  • Intercalation of cobalt cations into Co 9 S 8 interlayers for highly efficient and stable electrocatalytic hydrogen evolution
Title: Intercalation of cobalt cations into Co 9 S 8 interlayers for highly efficient and stable electrocatalytic hydrogen evolution
Non-noble metal based electrocatalysts for the hydrogen evolution reaction (HER) hold great potential for commercial applications. However, effective design strategies are greatly needed to manipulate the catalyst structures to achieve high activity and stability comparable to those of noble-metal based electrocatalysts. Herein, we present a facile route to synthesize layered Co 9 S 8 intercalated with Co cations (Co 2+ -Co 9 S 8 ) (with interlayer distance up to 1.08 nm) via a one-step solvothermal method. Benefiting from a large interlayer distance and efficient electron transfer between layers, the Co 2+ -Co 9 S 8 hybrid shows outstanding electrocatalytic hydrogen evolution performance in an acid electrolyte. The electrocatalytic performance is even better than that of 20% Pt/C at the <−0.54 V region with an overpotential of 86 mV at a current density of 10 mA cm −2 in 0.5 mol L −1 H 2 SO 4 . More importantly, the system can maintain excellent stability for more than 12 h without obvious decay. This study not only presents a novel and efficient approach to synthesize cobalt sulfide intercalated with Co cations for stable electrocatalytic HER but also provides an avenue for the design of intercalated materials used in other energy applications.  more » « less
Award ID(s):
2000135 1757220 1700390
NSF-PAR ID:
10322477
Author(s) / Creator(s):
; ; ; ; ; ; ; ;
Date Published:
Journal Name:
Journal of Materials Chemistry A
Volume:
10
Issue:
7
ISSN:
2050-7488
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; ( , Advanced Materials Interfaces)
    Abstract

    The development of non‐noble metal materials for efficient hydrogen evolution reaction (HER) in wide pH range is still a challenge at present. Herein, a predesigned polyoxometalate (POM)‐based metal–organic polymer {L3Co2 · 6H2O}[H3GeMo12O40] · 9H2O (L = 1,2,4‐triazole) is employed as bimetallic source together with thiourea converting to CoS2@MoS2on carbon cloth (CC) (abbreviated to CoS2@MoS2@CC) for the first time. Impressively, the CoS2@MoS2in the form of vertically interconnected nanoarrays with multiple interfaces are grown in situ on CC and act as electrodes directly for HER. The CoS2@MoS2@CC‐30h composite exhibits superb activity and long‐durability in both acidic and alkaline media. Low overpotential is achieved in 0.5mH2SO4(65 mV) and 1.0mKOH (87 mV) for 10 mA cm−2versus RHE, which overmatch major MoS2‐/POM‐based electrocatalysts. This work therefore may shed substantial lights on designing active and durable molybdenum‐based bi‐/polymetallic sulfide from variable POM‐based metal–organic polymers for electrocatalytic hydrogen evolution reaction in wide pH range.

     
    more » « less
  2. ; ; ; ; ; ; ; ; ( , Small Methods)
    Abstract

    Single atom catalysts (SACs) are considered as the emerging catalysts for boosting electricity‐driven CO2reduction reaction (CRR) and hydrogen evolution reaction (HER). To replace the rare and expensive noble metal electrocatalysts, developing nonprecious metal SACs (NPMSACs) with superior electrocatalytic activity and stability is of paramount importance for achieving high efficiency in CRR and HER. Herein, a brief overview of recent achievements in the carbon‐rich NPMSACs for both CRR and HER is provided. The synthesis strategies and corresponding electrocatalytic performances of various carbon‐rich NPMSACs are discussed in the order of various metals (Ni, Co, Fe, Zn, and Sn for CRR, as well as Ni, Co, Fe, Mo, and W for HER), with a special attention paid to understand the structure–activity relationships. Finally, the remaining challenges and future perspectives for enhancing CRR and HER performance of NPMSACs are outlined.

     
    more » « less
  3. ; ; ; ; ; ; ; ; ; ( , Energy & Environmental Science)
    Rational design and facile preparation of non-noble trifunctional electrocatalysts with high performance, low cost and strong durability for the oxygen reduction reaction (ORR), oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) are highly demanded, but remain as a big challenge. Herein, we report a spontaneous gas-foaming method to prepare nitrogen doped ultrathin carbon nanosheets (NCNs) by simply pyrolysing a mixture of citric acid and NH 4 Cl. Under the optimized pyrolysis temperature (carbonized at 1000 °C) and mass ratio of precursors (1 : 1), the synthesized NCN-1000-5 sample possesses an ultrathin sheet structure, an ultrahigh specific surface area (1793 m 2 g −1 ), and rich edge defects, and exhibits low overpotential and robust stability for the ORR, OER and HER. By means of density functional theory (DFT) computations, we revealed that the intrinsic active sites for the ORR, OER and HER are the carbon atoms located at the armchair edge and adjacent to the graphitic N dopants. When practically used as a catalyst in rechargeable Zn–air batteries, a high energy density (806 W h kg −1 ), a low charge/discharge voltage gap (0.77 V) and an ultralong cycle life (over 330 h) were obtained at 10 mA cm −2 for NCN-1000-5. This work not only presents a versatile strategy to develop advanced carbon materials with ultrahigh specific surface area and abundant edge defects, but also provides useful guidance for designing and developing multifunctional metal-free catalysts for various energy-related electrocatalytic reactions. 
    more » « less
  4. ; ; ; ; ; ; ; ( , npj 2D Materials and Applications)
    Abstract Two-dimensional (2D) molybdenum disulfide (MoS 2 ) has been recognized as a potential substitution of platinum (Pt) for electrochemical hydrogen evolution reaction (HER). However, the broad adoption of MoS 2 is hindered by its limited number of active sites and low inherent electrical conductivity. In this work, we employed a one-step solvothermal synthesis technique to construct a ternary hybrid structure consisting of dual-phase MoS 2, titanium carbide (Ti 3 C 2 ) MXene, and carbon nanotubes (CNTs), and demonstrated synergistic effects for active site exposure, surface area enlargement, and electrical conductivity improvement of the catalyst. The dual-phase MoS 2 (DP-MoS 2 ) is directly formed on the MXene with CNTs acting as crosslinks between 2D islands. The existence of edge-enriched metallic phase MoS 2 , the conductive backbone of MXene along with the crosslink function of CNTs clearly improves the overall HER performance of the ternary nanocomposite. Moreover, the integration of MoS 2 with MXene not only increases the interlayer distance of the 2D layers but also partially suppresses the MXene oxidation and the 2D layer restacking, leading to good catalytic stability. As a result, an overpotential of 169 mV and a low Tafel slope of 51 mV/dec was successfully achieved. This work paves a way for 2D-based electrocatalyst engineering and sheds light on the development of the next-generation noble metal-free HER electrocatalysts. 
    more » « less
  5. ; ; ; ; ; ; ; ; ; ( , Advanced Energy Materials)
    Abstract

    Solid‐state electrocatalysis plays a crucial role in the development of renewable energy to reshape current and future energy needs. However, finding an inexpensive and highly active catalyst to replace precious metals remains a big challenge for this technology. Here, tri‐molybdenum phosphide (Mo3P) is found as a promising nonprecious metal and earth‐abundant candidate with outstanding catalytic properties that can be used for electrocatalytic processes. The catalytic performance of Mo3P nanoparticles is tested in the hydrogen evolution reaction (HER). The results indicate an onset potential of as low as 21 mV, H2formation rate, and exchange current density of 214.7 µmol s−1g−1cat(at only 100 mV overpotential) and 279.07 µA cm−2, respectively, which are among the closest values yet observed to platinum. Combined atomic‐scale characterizations and computational studies confirm that high density of molybdenum (Mo) active sites at the surface with superior intrinsic electronic properties are mainly responsible for the remarkable HER performance. The density functional theory calculation results also confirm that the exceptional performance of Mo3P is due to neutral Gibbs free energy (ΔGH*) of the hydrogen (H) adsorption at above 1/2 monolayer (ML) coverage of the (110) surface, exceeding the performance of existing non‐noble metal catalysts for HER.

     
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email