An official website of the United States government
Abstract Miniature varifocal lenses are crucial for many applications requiring compact optical systems. Here, utilizing electro-mechanically actuated 0.5-mm aperture infrared Alvarez meta-optics, we demonstrate 3.1 mm (200 diopters) focal length tuning with an actuation voltage below 40 V. This constitutes the largest focal length tuning in any low-power electro-mechanically actuated meta-optic, enabled by the high energy density in comb-drive actuators producing large displacements at relatively low voltage. The demonstrated device is produced by a novel nanofabrication process that accommodates meta-optics with a larger aperture and has improved alignment between meta-optics via flip-chip bonding. The whole fabrication process is CMOS compatible and amenable to high-throughput manufacturing.
more »
« less
MEMS-actuated metasurface Alvarez lens
Abstract Miniature lenses with a tunable focus are essential components for many modern applications involving compact optical systems. While several tunable lenses have been reported with various tuning mechanisms, they often face challenges with respect to power consumption, tuning speed, fabrication cost, or production scalability. In this work, we have adapted the mechanism of an Alvarez lens – a varifocal composite lens in which lateral shifts of two optical elements with cubic phase surfaces give rise to a change in the optical power – to construct a miniature, microelectromechanical system (MEMS)-actuated metasurface Alvarez lens. Implementation based on an electrostatic MEMS generates fast and controllable actuation with low power consumption. The utilization of metasurfaces – ultrathin and subwavelength-patterned diffractive optics – as optical elements greatly reduces the device volume compared to systems using conventional freeform lenses. The entire MEMS Alvarez metalens is fully compatible with modern semiconductor fabrication technologies, granting it the potential to be mass-produced at a low unit cost. In the reported prototype operating at 1550 nm wavelength, a total uniaxial displacement of 6.3 µm was achieved in the Alvarez metalens with a direct-current (DC) voltage application up to 20 V, which modulated the focal position within a total tuning range of 68 µm, producing more than an order of magnitude change in the focal length and a 1460-diopter change in the optical power. The MEMS Alvarez metalens has a robust design that can potentially generate a much larger tuning range without substantially increasing the device volume or energy consumption, making it desirable for a wide range of imaging and display applications.
more »
« less
- Award ID(s):
- 2025489
- PAR ID:
- 10323246
- Date Published:
- Journal Name:
- Microsystems & Nanoengineering
- Volume:
- 6
- Issue:
- 1
- ISSN:
- 2055-7434
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Tunable optical lenses are in great demand in modern technologies ranging from augmented and virtual reality to sensing and detection. In this work, electrically tunable microlenses based on a polymer‐stabilized chiral ferroelectric nematic liquid crystal are described. The power of the lens can be quickly (within 5 ms) varied by ≈500 diopters by ramping an in‐plane electric field from 0 to 2.5 V µm−1. Importantly, within this relatively low‐amplitude field range, the lens is optically isotropic; thus, its focal length is independent of the polarization of incoming light. This remarkable performance combines the advantages of electrically tuned isotropic lenses and the field‐controlled shape of the lens, which are unique properties of chiral ferroelectric nematic liquid crystals and have no counterpart in other liquid crystals. The achieved lens performance represents a significant step forward as compared to liquid lenses controlled by electrowetting and opens new possibilities in various applications such as biomimetic optics, security printing, and solar energy concentration.more » « less
-
Khoo, Iam Choon (Ed.)Lenses with tunable focal lengths play important roles in nature as well as modern technologies. In recent years, the demand for electrically tunable lenses and lens arrays has grown, driven by the increasing interest in augmented and virtual reality, as well as sensing applications. In this paper, we present a novel type of electrically tunable microlens utilizing polymer-stabilized chiral ferroelectric nematic liquid crystal. The lens offers a fast response time (5ms) and the focal length can be tuned by applying an in-plane electric field. The electrically induced change in the lens shape, facilitated by the remarkable sensitivity of the chiral ferroelectric nematic to electric fields, enables the tunable focal length capability. The achieved performance of this lens represents a significant advancement compared to electrowetting-based liquid lenses and opens exciting prospects in various fields, including biomimetic optics, security printing, solar energy concentration, and AR/VR devices.more » « less
-
We demonstrate the implementation of a low-power, low-profile, varifocal liquid-crystal Fresnel lens stack suitable for tunable imaging in smart contact lenses. The lens stack consists of a high-order refractive-type liquid crystal Fresnel chamber, a voltage-controlled twisted nematic cell, a linear polarizer and a fixed offset lens. The lens stack has an aperture of 4 mm and thickness is ∼980 µm. The varifocal lens requires ∼2.5 VRMSfor a maximum optical power change of ∼6.5 D consuming electrical power of ∼2.6 µW. The maximum RMS wavefront aberration error was 0.2 µm and the chromatic aberration was 0.008 D/nm. The average BRISQUE image quality score of the Fresnel lens was 35.23 compared to 57.23 for a curved LC lens of comparable power indicating a superior Fresnel imaging quality.more » « less
-
We demonstrate focusing as well as imaging using diffractive microoptics, manufactured by two-photon polymerization grayscale lithography (2GL), that have been 3D printed into porous silicon oxide. While typical doublet lens systems require support structures that hold the lenses in place, our optics are held by the porous media itself, decreasing both the fabrication time and design constraints while increasing the optically active area. Compared to the typical two-photon polymerization fabrication process, 2GL offers better shape accuracy while simultaneously increasing throughput. To showcase 2GL manufactured optics in porous media, we fabricate singlet diffractive lenses with a diameter of 500 µm and numerical apertures of up to 0.6. We measure the intensity distribution in the focal plane, and along the optical axis. Furthermore, we design and fabricate a doublet lens system for imaging purposes with a diameter of 600 µm and thinner than 60 µm. We examine the imaging performance with a USAF 1951 resolution test chart and determine the resolution to be 287 lp/mm. 3D printing in porous SiO2thus holds great promise for future complex and unconventional microoptical solutions.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript
- Journal Article:
- https://doi.org/10.1038/s41378-020-00190-6
