The development of fibrous actuators with diverse actuation modes is expected to accelerate progress in active textiles, robotics, wearable electronics, and haptics. Despite the advances in responsive polymer-based actuating fibers, the available actuation modes are limited by the exclusive reliance of current technologies on thermotropic contraction along the fiber axis. To address this gap, the present study describes a reversible and spontaneous thermotropic elongation (~30%) in liquid crystal elastomer fibers produced via ultraviolet-assisted melt spinning. This elongation arises from the orthogonal alignment of smectogenic mesogens relative to the fiber axis, which contrasts the parallel alignment typically observed in nematic liquid crystal elastomer fibers and is achieved through mesophase control during extrusion. The fibers exhibiting thermotropic elongation enable active textiles increase pore size in response to temperature increase. The integration of contracting and elongating fibers within a single textile enables spatially distinct actuation, paving the way for innovations in smart clothing and fiber/textile actuators.
- Award ID(s):
- 1830958
- PAR ID:
- 10324544
- Date Published:
- Journal Name:
- Nature Communications
- Volume:
- 13
- Issue:
- 1
- ISSN:
- 2041-1723
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
-
Increasing demand of using everyday clothing in wearable sensing and display has synergistically advanced the field of electronic textiles, or e-textiles. A variety of types of e-textiles have been formed into stretchy fabrics in a manner that can maintain their intrinsic properties of stretchability, breathability, and wearability to fit comfortably across different sizes and shapes of the human body. These unique features have been leveraged to ensure accuracy in capturing physical, chemical, and electrophysiological signals from the skin under ambulatory conditions, while also displaying the sensing data or other immediate information in daily life. Here, we review the emerging trends and recent advances in e-textiles in wearable sensing and display, with a focus on their materials, constructions, and implementations. We also describe perspectives on the remaining challenges of e-textiles to guide future research directions toward wider adoption in practice.more » « less
-
null (Ed.)The emerging field of electronic textiles is currently hindered by a lack of mechanically robust fibers and yarns that efficiently conduct electricity. Conjugated polymer fibers are promising candidates to meet those requirements. In this work, a wet-spinning process is described to fabricate PEDOT:PSS fibers with electrical conductivities up to 3663 ± 326 S cm −1 , Young's moduli up to 22 GPa and tensile strength of 550 MPa, through inclusion of a sulfuric acid drawing step. The mechanism by which the sulfuric acid drawing step enhances the electrical and mechanical properties of the fibers is investigated. Moreover, the electrical conductivity of these fibers was further increased to 4039 ± 215 S cm −1 by immersing the fibers in sulfuric acid for additional time, at the expense, however, of lowering their Young's modulus and tensile strength. Additionally, we demonstrate the use of the fibers in various electronic textile applications such as: (a) flexible textile interconnections in an LED circuit, (b) a proof of concept thermochromic fiber bundle that changes color on demand, (c) a thermoelectric textile device using the fibers as the p-type legs, and (d) using the fibers as the channel in an organic electrochemical transistor to build an LED dimmer. This work presents a unique type of material with the potential of becoming a cornerstone in the emerging field of electronic textiles.more » « less
-
more » « less
Abstract Smart textiles are currently being pursued for actuation and sensing for their potential to directly incorporate “intelligence” into the fabric, in contrast to wearable technologies. In smart textiles, smart materials (e.g., piezoelectric) are formed into yarns that are woven into fabrics for clothing. One immediate requirement for such textiles is their stability during washing cycles, as expected of any clothing items, which has been largely lacking so far. Here, we investigate the washing stability of nanofibrous piezoelectric textiles. Our results reveal that electrospun textiles exhibit remarkable structural stability from the fiber microstructure to the textile level. Overall fiber crystalline composition and electroactive phase remain stable within 1% of ~47% and ~85%, respectively. Mechanically, the textile displays sustained performance, with only negligible changes observed. The yield strain and stress only show a ~8% and 9% differences, respectively. Moreover, piezoelectric stability is confirmed through phase preservation and slight variation in voltage output of ~6%. These results prove the candidacy that the processing of electrospun polyvinylidene fluoride (PVDF) fibers to woven textiles is applicable to the demands of smart textiles, which is expected to accelerate the commercialization of such textiles for wearable robotics and health monitoring.
-
more » « less
Abstract Electronic textiles (e‐textiles) that combine the wearing comfort of textiles and the functionality of soft electronics are highly demanded in wearable applications. However, fabricating robust high‐performance stretchable e‐textiles with good abrasion resistance and high‐resolution aesthetic patterns for high‐throughput manufacturing and practical applications remains challenging. Herein, the authors report a new multifunctional e‐textile fabricated via screen printing of the water‐based silver fractal dendrites conductive ink. The as‐fabricated e‐textiles spray‐coated with the invisible waterproofing agent exhibit superior flexibility, water resistance, wearing comfort, air permeability, and abrasion resistance, achieving a low sheet resistance of 0.088 Ω sq−1, high stretchability of up to 154%, and excellent dynamic stability for over 1000 cyclic testing (ε = 100%). The printed e‐textiles can be explored as strain sensors and ultralow voltage‐driven Joule heaters driven for personalized thermal management. They finally demonstrate an integrated aesthetic smart clothing made of their multifunctional e‐textiles for human motion detection and body‐temperature management. The printed e‐textiles provide new opportunities for developing novel wearable electronics and smart clothing for future commercial applications.
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1038/s41467-022-29859-4
