Abstract Bandstructure engineering is a key route for thermoelectric performance enhancement. Here, 20–50% Seebeck (S) enhancement is reported for XNiCuySn half‐Heusler samples based onX= Ti. This novel electronic effect is attributed to the emergence of impurity bands of finite extent, due to the Cu dopants. Depending on the dispersion, extent, and offset with respect to the parent material, these bands are shown to enhanceSto different degrees. Experimentally, this effect is controllable by the Ti content of the samples, with the addition of Zr/Hf gradually removing the enhancement. At the same time, the mobility remains largely intact, enabling power factors ≥3 mW m−1K−2near room temperature, increasing to ≥5 mW m−1K−2at high temperature. Combined with reduced thermal conductivity due to the Cu interstitials, this enables high averagezT= 0.67–0.72 between 320 and 793 K for XNiCuySn compositions with ≥70% Ti. This work reveals the existence of a new route for electronic performance enhancement in n‐type XNiSn materials that are normally limited by their single carrier pocket. In principle, impurity bands can be applied to other materials and provide a new direction for further development.
more »
« less
Large enhancement of thermoelectric effects in multiple quantum dots in a serial configuration due to Coulomb interactions
Abstract In the present work we theoretically study Seebeck effect in a set of several quantum dots in a serial configuration coupled to nonmagnetic conducting electrodes. We focus on the combined effect of intra-dot Coulomb interactions between electrons and the number of dots on the thermopower ( S ) and the thermoelectric figure of merit (ZT) of the considered transport junction within the Coulomb blockade regime. We show that a strong enhancement of the both S and ZT may occur when the chemical potential of electrodes is situated within the Coulomb gap in the electron transmission spectrum thus indicating a possibility of significant increase of the efficiency of heat-to-electric energy conversion. The enhancement becomes more pronounced when the number of dots increases.
more »
« less
- Award ID(s):
- 2122102
- PAR ID:
- 10326340
- Date Published:
- Journal Name:
- Journal of Physics: Condensed Matter
- Volume:
- 34
- Issue:
- 25
- ISSN:
- 0953-8984
- Page Range / eLocation ID:
- 255302
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract We study the process of laser-assisted radiative recombination of an electron with a proton in a cold hydrogen plasma employing the semiclassical Kramers’ approach which involves calculation of classical trajectories in combined laser and Coulomb fields and the use of the correspondence principle. Due to the Coulomb focusing effect, recombination is the most effective when the initial electron momentum is parallel to the laser polarization. Orders of magnitude enhancement of the cross section, as compared to the laser-free case, is observed in this case. With increasing angle between the electron momentum and polarization, the recombination cross section drops. However, even after averaging over Maxwellian velocity distribution we obtain a substantial enhancement of the recombination rate constant, as compared to the zero-field case. For the field intensities in the range 30–350 MW cm−2, the enhancement occurs in the region of the radiation wavelength from 5 to 20µm and for the plasma temperature from 20 to 300 K.more » « less
-
Abstract Filming atomic motion within molecules is an active pursuit of molecular physics and quantum chemistry. A promising method is laser-induced Coulomb Explosion Imaging (CEI) where a laser pulse rapidly ionizes many electrons from a molecule, causing the remaining ions to undergo Coulomb repulsion. The ion momenta are used to reconstruct the molecular geometry which is tracked over time (i.e., filmed) by ionizing at an adjustable delay with respect to the start of interatomic motion. Results are distorted, however, by ultrafast motion during the ionizing pulse. We studied this effect in water and filmed the rapid “slingshot” motion that enhances ionization and distorts CEI results. Our investigation uncovered both the geometry and mechanism of the enhancement which may inform CEI experiments in many other polyatomic molecules.more » « less
-
Previously reported vertical UL-94 testing results showed that carbon nanofiber z-threaded carbon fiber-reinforced polymer (ZT-CFRP) laminates have significantly improved flame resistance capabilities compared to traditional carbon fiber-reinforced (CFRP) laminates. Shorter flame self-extinguishing times and no flame propagation were reported. These characteristics provided evidence that ZT-CFRP’s unique microstructure, combined with its inherent strengthened mechanical, thermal, and electrical properties, has the potential to have more favorable high-temperature applications than traditional CFRP. This study examined the interlaminar shear strength (ILSS) enhancement of ZT-CFRP laminates, in comparison to traditional CFRP, when exposed to gradually increased temperatures. This was accomplished through the use of a furnace and an in-house constructed three-point bending apparatus capable of supplying static loading to determine the temperature at which failure occurred. The apparatus was loaded with a specimen and then placed inside the furnace where the temperature was allowed to increase based upon a consistent heating schedule. It was observed that ZT-CFRP samples had an approximately 30 ˚C improvement in temperature handling capabilities while exposed to an interlaminar shear load when compared to CFRP samples. Microscopic image analysis was also performed to observe how CNF z-threads contributed to the improved performance observed for ZT-CFRP at extreme elevated temperatures.more » « less
-
Zero trust (ZT) is the term for an evolving set of cybersecurity paradigms that move defenses from static, network-based perimeters to focus on users, assets, and resources. It assumes no implicit trust is granted to assets or user accounts based solely on their physical or network location. We have billions of devices in IoT ecosystems connected to enable smart environments, and these devices are scattered around different locations, sometimes multiple cities or even multiple countries. Moreover, the deployment of resource-constrained devices motivates the integration of IoT and cloud services. This adoption of a plethora of technologies expands the attack surface and positions the IoT ecosystem as a target for many potential security threats. This complexity has outstripped legacy perimeter-based security methods as there is no single, easily identified perimeter for different use cases in IoT. Hence, we believe that the need arises to incorporate ZT guiding principles in workflows, systems design, and operations that can be used to improve the security posture of IoT applications. This paper motivates the need to implement ZT principles when developing access control models for smart IoT systems. It first provides a structured mapping between the ZT basic tenets and the PEI framework when designing and implementing a ZT authorization system. It proposes the ZT authorization requirements framework (ZT-ARF), which provides a structured approach to authorization policy models in ZT systems. Moreover, it analyzes the requirements of access control models in IoT within the proposed ZT-ARF and presents the vision and need for a ZT score-based authorization framework (ZT-SAF) that is capable of maintaining the access control requirements for ZT IoT connected systems.more » « less
An official website of the United States government

