skip to main content

Explore Research Products in the NSF-PAR

Title: The M w = 6.6 earthquake and tsunami of south Crete on 2020 May 2
SUMMARY On 2020 May 2, an Mw = 6.6 earthquake struck about 63 km south of Ierapetra in Crete, Greece. The earthquake generated a small tsunami which agitated local harbours. We studied this event in the context of earthquakes with seismic records in 1908, 1910, 1923, 1952, 2009 and 2013, all of similar magnitudes located south of Crete. Based on an energy-to-moment ratio, our analysis suggests that this event was neither slow nor fast, hence appropriate for using scaling laws to infer seafloor deformations. We also performed a field survey, three days after the event and present field observations from seven locations, including the island of Chrisi, where our highest measurement of 0.95 m was located. Runup along the coast of southern Crete ranged from 0.24 to 0.87 m. One tide gauge record is available for this event, and we did image analysis to obtain accurately timed water surface elevations from eyewitness videos and images. We undertook high-resolution hydrodynamic simulations using published moment tensor solutions to identify the source of the tsunami. Simulations were performed with two models, MOST (a nonlinear shallow water model) and COULWAVE (a Boussinesq-type model), to infer how different approximations of the parent equations of motion affect predictions for tsunamis of this size, which are fairly common in the Eastern Mediterranean and routinely trigger Tsunami Service Providers to issue warning messages. Based on the inter-model comparison, we conclude that the shallow-water equations are adequate in modelling this event at the distances considered, suggesting that such codes can be used to infer the tsunami source and to estimate tsunami impacts. Last, our field work revealed lack of knowledge of tsunami hazards, as most eyewitnesses remained near the waterfront, filming the associated unusual water motions instead of taking shelter on high ground.  more » « less
Award ID(s):
1830056 1940351
NSF-PAR ID:
10326815
Author(s) / Creator(s):
; ; ; ; ; ; ;
Date Published:
Journal Name:
Geophysical Journal International
Volume:
230
Issue:
1
ISSN:
0956-540X
Page Range / eLocation ID:
480 to 506
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; ( , Frontiers in Earth Science)
    null (Ed.)
    Finite-fault models for the 2010 M w 8.8 Maule, Chile earthquake indicate bilateral rupture with large-slip patches located north and south of the epicenter. Previous studies also show that this event features significant slip in the shallow part of the megathrust, which is revealed through correction of the forward tsunami modeling scheme used in tsunami inversions. The presence of shallow slip is consistent with the coseismic seafloor deformation measured off the Maule region adjacent to the trench and confirms that tsunami observations are particularly important for constraining far-offshore slip. Here, we benchmark the method of Optimal Time Alignment (OTA) of the tsunami waveforms in the joint inversion of tsunami (DART and tide-gauges) and geodetic (GPS, InSAR, land-leveling) observations for this event. We test the application of OTA to the tsunami Green’s functions used in a previous inversion. Through a suite of synthetic tests we show that if the bias in the forward model is comprised only of delays in the tsunami signals, the OTA can correct them precisely, independently of the sensors (DART or coastal tide-gauges) and, to the first-order, of the bathymetric model used. The same suite of experiments is repeated for the real case of the 2010 Maule earthquake where, despite the results of the synthetic tests, DARTs are shown to outperform tide-gauges. This gives an indication of the relative weights to be assigned when jointly inverting the two types of data. Moreover, we show that using OTA is preferable to subjectively correcting possible time mismatch of the tsunami waveforms. The results for the source model of the Maule earthquake show that using just the first-order modeling correction introduced by OTA confirms the bilateral rupture pattern around the epicenter, and, most importantly, shifts the inferred northern patch of slip to a shallower position consistent with the slip models obtained by applying more complex physics-based corrections to the tsunami waveforms. This is confirmed by a slip model refined by inverting geodetic and tsunami data complemented with a denser distribution of GPS data nearby the source area. The models obtained with the OTA method are finally benchmarked against the observed seafloor deformation off the Maule region. We find that all of the models using the OTA well predict this offshore coseismic deformation, thus overall, this benchmarking of the OTA method can be considered successful. 
    more » « less
  2. ; ; ( , Journal of Geophysical Research: Solid Earth)
    Abstract

    Most large tsunamis are generated by earthquakes on offshore plate boundary megathrusts. The primary factors influencing tsunami excitation are the seismic moment, faulting geometry, and depth of the faulting. Efforts to provide rapid tsunami warning have emphasized seismic and geodetic methods for quickly determining the event size and faulting geometry. It remains difficult to evaluate the updip extent of rupture, which has significant impact on tsunami excitation. TeleseismicPwaves can constrain this issue; slip under deep water generates strongpwPwater reverberations that persist as ringingPcodaafter the directPphases from the faulting have arrived. Event‐averagedPcoda/Pamplitude measures at large epicentral distances (>80°), tuned to the dominant periods of deep waterpwP(~12–15 s), correlate well with independent models of whether slip extends to near the trench or not. Data at closer ranges (30° to 80°) reduce the time lag needed for inferring the updip extent of rupture to <15 min. Arrival ofPPandPPPphases contaminates closer distancePcodameasures, but this can be suppressed by azimuthal or distance binning of the measures. Narrowband spectral ratio measures and differential magnitude measures ofPcodaand directP(mB) perform comparably to broader band root‐mean‐square (RMS) measures.Pcoda/Plevels for large nonmegathrust events are also documented. Rapid measurement ofPcoda/Pmetrics after a large earthquake can supplement quick moment tensor determinations to enhance tsunami warnings; observation of largePcodalevels indicates that shallow submarine rupture occurred and larger than typical tsunami (for givenMW) can be expected.

     
    more » « less
  3. ; ; ; ; ( , Geophysical Journal International)
    SUMMARY

    Tsunami generation by offshore earthquakes is a problem of scientific interest and practical relevance, and one that requires numerical modelling for data interpretation and hazard assessment. Most numerical models utilize two-step methods with one-way coupling between separate earthquake and tsunami models, based on approximations that might limit the applicability and accuracy of the resulting solution. In particular, standard methods focus exclusively on tsunami wave modelling, neglecting larger amplitude ocean acoustic and seismic waves that are superimposed on tsunami waves in the source region. In this study, we compare four earthquake-tsunami modelling methods. We identify dimensionless parameters to quantitatively approximate dominant wave modes in the earthquake-tsunami source region, highlighting how the method assumptions affect the results and discuss which methods are appropriate for various applications such as interpretation of data from offshore instruments in the source region. Most methods couple a 3-D solid earth model, which provides the seismic wavefield or at least the static elastic displacements, with a 2-D depth-averaged shallow water tsunami model. Assuming the ocean is incompressible and tsunami propagation is negligible over the earthquake duration leads to the instantaneous source method, which equates the static earthquake seafloor uplift with the initial tsunami sea surface height. For longer duration earthquakes, it is appropriate to follow the time-dependent source method, which uses time-dependent earthquake seafloor velocity as a forcing term in the tsunami mass balance. Neither method captures ocean acoustic or seismic waves, motivating more advanced methods that capture the full wavefield. The superposition method of Saito et al. solves the 3-D elastic and acoustic equations to model the seismic wavefield and response of a compressible ocean without gravity. Then, changes in sea surface height from the zero-gravity solution are used as a forcing term in a separate tsunami simulation, typically run with a shallow water solver. A superposition of the earthquake and tsunami solutions provides an approximation to the complete wavefield. This method is algorithmically a two-step method. The complete wavefield is captured in the fully coupled method, which utilizes a coupled solid Earth and compressible ocean model with gravity. The fully coupled method, recently incorporated into the 3-D open-source code SeisSol, simultaneously solves earthquake rupture, seismic waves and ocean response (including gravity). We show that the superposition method emerges as an approximation to the fully coupled method subject to often well-justified assumptions. Furthermore, using the fully coupled method, we examine how the source spectrum and ocean depth influence the expression of oceanic Rayleigh waves. Understanding the range of validity of each method, as well as its computational expense, facilitates the selection of modelling methods for the accurate assessment of earthquake and tsunami hazards and the interpretation of data from offshore instruments.

     
    more » « less
  4. ; ; ( , Journal of Advances in Modeling Earth Systems)
    Abstract

    Solving the shallow water equations efficiently is critical to the study of natural hazards induced by tsunami and storm surge, since it provides more response time in an early warning system and allows more runs to be done for probabilistic assessment where thousands of runs may be required. Using adaptive mesh refinement speeds up the process by greatly reducing computational demands while accelerating the code using the graphics processing unit (GPU) does so through using faster hardware. Combining both, we present an efficient CUDA implementation of GeoClaw, an open source Godunov‐type high‐resolution finite volume numerical scheme on adaptive grids for shallow water system with varying topography. The use of adaptive mesh refinement and spherical coordinates allows modeling transoceanic tsunami simulation. Numerical experiments on the 2011 Japan tsunami and a local tsunami triggered by a hypotheticalMw 7.3 earthquake on the Seattle Fault illustrate the correctness and efficiency of the code, which implements a simplified dimensionally split version of the algorithms. Both numerical simulations are conducted on subregions on a sphere with adaptive grids that adequately resolve the propagating waves. The implementation is shown to be accurate and faster than the original when using Central Processing Units (CPUs) alone. The GPU implementation, when running on a single GPU, is observed to be 3.6 to 6.4 times faster than the original model running in parallel on a 16‐core CPU. Three metrics are proposed to evaluate relative performance of the model, which shows efficient usage of hardware resources.

     
    more » « less
  5. ; ; ; ; ; ( , Journal of Geophysical Research: Solid Earth)
    Abstract

    A great earthquake struck the Semidi segment of the plate boundary along the Alaska Peninsula on 29 July 2021, re‐rupturing part of the 1938 rupture zone. The 2021MW8.2 Chignik earthquake occurred just northeast of the 22 July 2020MW7.8 Simeonof earthquake, with little slip overlap. Analysis of teleseismicPandSHwaves, regional Global Navigation Satellite System (GNSS) displacements, and near‐field and far‐field tsunami observations provides a good resolution of the 2021 rupture process. During ∼60‐s long faulting, the slip was nonuniformly distributed along the megathrust over depths from 32 to 40 km, with up to ∼12.9‐m slip in an ∼170‐km‐long patch. The 40–45 km down‐dip limit of slip is well constrained by GNSS observations along the Alaska Peninsula. Tsunami observations preclude significant slip from extending to depths <25 km, confining all coseismic slip to beneath the shallow continental shelf. Most aftershocks locate seaward of the large‐slip zones, with a concentration of activity up‐dip of the deeper southwestern slip zone. Some localized aftershock patches locate beneath the continental slope. The surface‐wave magnitudeMSof 8.1 for the 2021 earthquake is smaller thanMS = 8.3–8.4 for the 1938 event. Seismic and tsunami data indicate that slip in 1938 was concentrated in the eastern region of its aftershock zone, extending beyond the Semidi Islands, where the 2021 event did not rupture.

     
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email