Fiber reinforced polymer (FRP) composite materials have been used in a variety of civil and infrastructure applications since the early1980s, including in wind turbine blades. The world is now confronting the problem of how to dispose of decommissioned blades in an environmentally sustainable manner. One proposed solution is to repurpose the blades for use in new structures. One promising repurposing application is in pedestrian and cycle bridges. This paper reports on the characterization of a 13.4-m long FRP wind blade manufactured by LM Windpower (Kolding, Demark) in 1994. Two blades of this type were used as girders for a pedestrian bridge on a greenway (walking and biking trail) in Cork, Ireland. The as-received geometric, material, and structural properties of the 27 year-old blade were obtained for use in the structural design of the bridge. The material tests included physical (volume fraction and laminate architecture) and mechanical (tension and compression) tests at multiple locations. Full-scale flexural testing of a 4-m long section of the blade between 7 and 11 m from the root of the blade was performed to determine the load-deflection behavior, ultimate capacity, strain history, and failure modes when loaded to failure. Key details of the testing and the results are provided. The results of the testing revealed that the FRP material is still in excellent condition and that the blade has the strength and stiffness in flexure to serve as a girder for the bridge constructed.
- NSF-PAR ID:
- 10330476
- Date Published:
- Journal Name:
- 5th International Conference on Structures and Architecture
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
-
more » « less
This paper describes repurposing projects using decommissioned wind turbine blades in bridges conducted under a multinational research project entitled “Re-Wind”. Repurposing is defined by the Re-Wind Network as the re-engineering, redesigning, and remanufacturing of a wind blade that has reached the end of its life on a turbine and taken out of service and then reused as a load-bearing structural element in a new structure (e.g., bridge, transmission pole, sound barrier, seawall, shelter). The issue of end-of-life of wind turbine blades is becoming a significant sustainability concern for wind turbine manufacturers, many of whom have committed to the 2030 or 2040 sustainability goals that include zero-waste for their products. Repurposing is the most sustainable end-of-life solution for wind turbine blades from an environmental, economic, and social perspective. The Network has designed and constructed two full-size pedestrian/cycle bridges—one on a greenway in Cork, Ireland and the other in a quarry in Draperstown, Northern Ireland, UK. The paper describes the design, testing, and construction of the two bridges and provides cost data for the bridges. Two additional bridges that are currently being designed for construction in Atlanta, GA, USA are also described. The paper also presents a step-by-step procedure for designing and building civil structures using decommissioned wind turbine blades. The steps are: project planning and funding, blade sourcing, blade geometric characterization, material testing, structural testing, designing, cost estimating, and construction.
-
The first generation of wind turbines are being retired, and a tremendous number of wind tur-bine blades are coming out of service. Architects and engineers are developing re-use ideas for these blades and are wrestling with their complex geometries and materiality. This paper details a four-phase process for reconstructing the geometry of wind turbine blades, starting from a point-cloud scan and finishing with a digital model that represents the blade and its associated properties. The process builds on earlier work that created an airfoil database to store the nor-malized coordinates of publicly available airfoil profiles. This profile database is traversed to match airfoil shapes to cross-sections found in the point-cloud. Root, transition, and airfoil shapes are matched to cross-sections along the full blade to reconstruct the outer geometry. Based on data from the interior of the blade, the structural spar box is reconstructed. The addi-tion of thickness and material property data allows for calculation of section properties at multi-ple stations along the blade. The resulting 3D geometry and the associated data is used for ar-chitectural design and engineering calculations to develop second-life applications for wind blades. The paper demonstrates the workflow through examples from a GE 37-meter blade and an LM 13.4-meter blade.more » « less
-
Millions of tons of GFRP composites are expected to stockpile in the next 20-30 years from decommissioning wind turbine blades, which are made primarily of these materials. Responsible and attractive solutions are currently being studied by several research teams across Europe and the United States. The Re-Wind Network is one of these research teams that focuses on developing strategies and methodologies to transform the decommissioned wind blades into ready-to-use civil infrastructure (e.g., pedestrian bridge girders and power transmission poles). This paper reports on testing of a part of a full-sized power transmission pole prototype, made from a decommissioned GE37 wind turbine blade, and loaded in the gravity direction mimicking expected loads during its “new” lifetime. Full-scale connection testing is summarized and combined with the results of the test on the 5.5 m high full-size section of the prototype to obtain safety factors for various structural components under different expected load cases (these include gravity, wind, and ice loads). Structural Integrity of the various components of the power pole is studied to prove efficacy of the proposed second-life application of the decommissioned wind blade as a power transmission pole. Recommendations to improve the design for the planned future field full-blade prototyping are emphasized.more » « less
-
The rapid increase in the wind energy sector has brought forward a challenging problem of disposing off a huge quantity of non-biodegradable, thermosetting fibre reinforced polymer (FRP) composite materials used in wind turbine blades. Most of the existing solutions are either not sustainable or not economical. This study focuses on re-use options. In this paper a design option for re-using decommissioned wind turbine blades in pedestrian bridges is presented. To demonstrate the concept, an 8.5 m long pedestrian bridge is designed using parts taken from two A29 (modified version of Vestas V27) windblades. A preliminary code-based structural analysis is carried out to assess practicality of the proposed design and to check strength and serviceability requirements given in the prescribed codes. The results show that proposed design full-fills the strength criteria and serviceability requirements recommended in the Eurocodes. The maximum strength utilisation of the blade components is found about 61% and deflection is limited to span/303.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Paper:
- The DOI is not currently available.
