skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Effects of Inlet Flow Rates on Purge Durations in an Atomic Layer Deposition Process
The effects of inlet flow rates on the purge durations in an atomic layer deposition (ALD) process are investigated through the simulation of three-dimensional laminar multicomponent flow in viscous flow reactors. The operating pressure and temperature are 10 torr (1333 Pa) and 300 °C, respectively. Purge durations in reactors with inlet located on the top surface of the reactor are compared with those in a base reactor with one inlet at the bottom surface of the reactor. It is found that purge durations are reduced by an increase in the flow rates, but they are independent from the number of inlets if the flow rates are maintained equal among different reactors. One exception is the reactor with one inlet at the center of the top surface of the reactor, which experiences the longest purge durations, most likely due to the axisymmetric gas injection in this reactor. The acquired results will provide a better understanding about designing efficient viscous flow reactors to reduce both purge duration and gas consumption.  more » « less
Award ID(s):
1914751
PAR ID:
10332056
Author(s) / Creator(s):
Date Published:
Journal Name:
Proceedings of the 9th International Conference on Fluid Flow, Heat and Mass Transfer
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; (, Atmospheric Measurement Techniques)
    Flow tube reactors are widely employed to study gas-phase atmospheric chemistry and secondary organic aerosol (SOA) formation. The development of a new laminar-flow tube reactor, the Caltech Photooxidation Flow Tube (CPOT), intended for the study of gas-phase atmospheric chemistry and SOA formation, is reported here. The present work addresses the reactor design based on fluid dynamical characterization and the fundamental behavior of vapor molecules and particles in the reactor. The design of the inlet to the reactor, based on computational fluid dynamics (CFD) simulations, comprises a static mixer and a conical diffuser to facilitate development of a characteristic laminar flow profile. To assess the extent to which the actual performance adheres to the theoretical CFD model, residence time distribution (RTD) experiments are reported with vapor molecules (O3) and submicrometer ammonium sulfate particles. As confirmed by the CFD prediction, the presence of a slight deviation from strictly isothermal conditions leads to secondary flows in the reactor that produce deviations from the ideal parabolic laminar flow. The characterization experiments, in conjunction with theory, provide a basis for interpretation of atmospheric chemistry and SOA studies to follow. A 1-D photochemical model within an axially dispersed plug flow reactor (AD-PFR) framework is formulated to evaluate the oxidation level in the reactor. The simulation indicates that the OH concentration is uniform along the reactor, and an OH exposure (OHexp) ranging from ∼ 109 to ∼ 1012 molecules cm−3 s can be achieved from photolysis of H2O2. A method to calculate OHexp with a consideration for the axial dispersion in the present photochemical system is developed. 
    more » « less
  2. ; ; ; (, Powder technology)
    null (Ed.)
    Continuous vibrating spatial particle ALD reactors were developed to achieve high powder throughput while minimizing reactor footprint. Unlike fluidized bed reactors, continuous vibrating spatial particle ALD reactors operate below fluidization, using linear vibration to convey particles through alternating regions of precursor gas. Fine powder convection in these vibrating bed reactors is still not well understood, so cohesive discrete element- method (DEM) simulations were performed to investigate the solids flow behavior. Using a Fast Fourier Transform(FFT) algorithm, we constructed a sum-of-sines model for the reactor kinematics based on accelerometer data. Accelerometer results and DEM simulations revealed the role of high-frequency excitations and need for backsliding and sticking avoidance in horizontal conveyors at low-g accelerations. From these observations, we propose a novel sawtooth excitation to enable convection of cohesive fine powders at low flow velocities. The model results were compared to data from an in-house continuous vibrating spatial particle ALD reactor. 
    more » « less
  3. ; ; (, Environmental Science: Nano)
    Reduction of nitroaromatic compounds (NACs), an important class of groundwater pollutants, by Fe( ii ) associated with iron oxides, a highly reactive reductant in anoxic aquifers, has been studied widely, but there are significant differences between the well-controlled, batch reactor conditions of the laboratory and the complicated conditions encountered in the field. Continuous flow column reactors containing goethite-coated sand and aqueous carbonate buffer were continuously exposed to 0.05 mM 4-chloronitrobenzene (4-ClNB) and 0.5 mM Fe( ii ) to emulate more realistic scenarios and to allow study of the oxidative growth of goethite particles using both saturated and unsaturated flow conditions. The experiments were designed to test how attachment to a surface affected particle growth and how particle growth affected the extent of reaction over time. After reaction, particles from different sections of each column were collected, and the goethite was detached from the sand grains for characterization using transmission electron microscopy. The amount of oxidative growth varied as a function of distance from the column inlet, with the most growth observed at the inlet end (bottom) of the column. Similar to previous work using batch reactors, newly oxidized Fe( iii ) was mostly added to the goethite particle tips, resulting in up to an 81% increase in length under saturated flow and a 50% increase in length under unsaturated flow after 220 pore volumes. With saturated flow, reactant concentrations and the extent of the reaction are important factors determining the extent of mineral growth. For unsaturated column conditions, however, flow path substantially impacts mineral growth in the column. Reactors sacrificed after 220 pore volumes under saturated flow conditions resulted in an overall 70% increase in goethite mass while the unsaturated flow column resulted in a 40% increase in goethite mass, more variable mineral growth as a function of distance from the inlet, and overall, 50% less 4-ClNB conversion. The results demonstrate that quantitative characterization of oxidative mineral growth of goethite nanoparticles attached to an underlying mineral is practical and elucidates the major variables impacting the reactivity of mineral nanoparticles in contaminated groundwater systems. 
    more » « less
  4. ; ; ; ; (, Atmospheric Measurement Techniques)
    null (Ed.)
    Abstract. Oxidation flow reactors (OFRs) have been developed to achieve high degrees of oxidant exposures over relatively short space times (defined as the ratio of reactor volume to the volumetric flow rate). While, due to their increased use, attention has been paid to their ability to replicate realistic tropospheric reactions by modeling the chemistry inside the reactor, there is a desire to customize flow patterns. This work demonstrates the importance of decoupling tracer signal of the reactor from that of the tubing when experimentally obtaining these flow patterns. We modeled the residence time distributions (RTDs) inside the Washington University Potential Aerosol Mass (WU-PAM) reactor, an OFR, for a simple set of configurations by applying the tank-in-series (TIS) model, a one-parameter model, to a deconvolution algorithm. The value of the parameter, N, is close to unity for every case except one having the highest space time. Combined, the results suggest that volumetric flow rate affects mixing patterns more than use of our internals. We selected results from the simplest case, at 78 s space time with one inlet and one outlet, absent of baffles and spargers, and compared the experimental F curve to that of a computational fluid dynamics (CFD) simulation. The F curves, which represent the cumulative time spent in the reactor by flowing material, match reasonably well. We value that the use of a small aspect ratio reactor such as the WU-PAM reduces wall interactions; however sudden apertures introduce disturbances in the flow, and suggest applying the methodology of tracer testing described in this work to investigate RTDs in OFRs to observe the effect of modified inlets, outlets and use of internals prior to application (e.g., field deployment vs. laboratory study). 
    more » « less
  5. ; ; ; (, Environmental Science: Water Research & Technology)
    Denitrification in woodchip bioreactors (WBRs) treating agricultural drainage and runoff is frequently carbon-limited due to the recalcitrance of carbon (C) in lignocellulosic woodchip biomass. Recent research has shown that redox fluctuations, achieved through periodic draining and re-flooding of WBRs, can increase nitrate removal rates by enhancing the release of labile C during oxic periods. While dying–rewetting (DRW) cycles appear to hold great promise for improving the performance of denitrifying WBRs, redox fluctuations in nitrogen-rich environments are commonly associated with enhanced emissions of the greenhouse gas nitrous oxide (N 2 O) due to inhibition of N 2 O reduction in microaerophilic conditions. Here, we evaluate the effects of oxic–anoxic cycling associated with DRW on the quantity and quality of C mobilized from woodchips, nitrate removal rates, and N 2 O accumulation in a complementary set of flow-through and batch laboratory bioreactors at 20 °C. Redox fluctuations significantly increased nitrate removal rates from 4.8–7.2 g N m −3 d −1 in a continuously saturated (CS) reactor to 9.8–11.2 g N m −3 d −1 24 h after a reactor is drained and re-saturated. Results support the theory that DRW conditions lead to faster NO 3 − removal rates by increasing mobilization of labile organic C from woodchips, with lower aromaticity in the dissolved C pool of oxic–anoxic reactors highlighting the importance of lignin breakdown to overall carbon release. There was no evidence for greater N 2 O accumulation, measured as N 2 O product yields, in the DRW reactors compared to continuously saturated reactors. We propose that greater organic C availability for N 2 O reducers following oxic periods outweighs the effect of microaerophilic inhibition of N 2 O reduction in controlling N 2 O dynamics. Implications of these findings for optimizing DRW cycling to enhance nitrate removal rates in denitrifying WBRs are discussed. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email